MS20N04NE P-Channel 20-V (D-S) MOSFET Description These miniature surface mount MOSFETs utilize High Cell Density process. Low rDS(on) assures minimal power loss and conserves energy, making this device ideal for use in power management circuitry. Typical applications are PWMDC-DC converters, power management in portable and battery-powered products such as computers, printers, battery charger, telecommunication power system, and telephones power system. Features • Low rDS(on) provides higher efficiency and extends battery life • High power and current handling capability • Low side high current DC-DC Converter • Applications • Miniature SOT-23 Surface Mount Package • Saves Board Space • RoHS compliant package Packing & Order Information 3,000/Reel ESD Protected Graphic symbol Publication Order Number: [MS20N04NE] © Bruckewell Technology Corporation Rev. A -2014 MS20N04NE P-Channel 20-V (D-S) MOSFET MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (TA=25°C unless otherwise specified) Symbol Parameter Value Unit VDS Drain-Source Voltage 20 V VGS Gate-Source Voltage ±20 V Continuous Drain Current (TA= 25°C) 4.0 A Continuous Drain Currenta (TA =70°C) 3.1 A ±20 A 1.6 A -55 to +150 °C a 1.3 W a 0.8 W a ID Pulsed Drain Current IDM b IS Continuous Source Current (Diode Conduction) TJ/TSTG Operating Junction and Storage Temperature a Power Dissipation (TA =25°C) PD Power Dissipation (TA =70°C) Thermal Resistance Ratings Symbol Parameter Maximum a 100 a 166 Maximum Junction-to-Ambient (t <= 5 sec) RTHJA Maximum Junction-to-Ambient (Steady-State) Units °C/W Notes: a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature Static Symbol Parameter Test Conditions Min VGS(th) Gate-Threshold Voltage VDS = VGS, ID = -250μA 0.7 IGSS Gate-Body Leakage VDS =0 V , VGS = ±8 V ±100 IDSS Zero Gate Voltage Drain Current VDS = 16 V , VGS = 0 V 1 VDS = 16 V , VGS = 0 V , TJ= 55°C 10 ID(on) On-State Drain Current IDS(on) Drain-Source On-Resistance gfs Forward Tranconductance VDS = 10 V, ID = 4.0 A 11.3 S VSD Diode Forward Voltage IS = 1.6 A , VGS = 0 V 0.75 V A VDS = 5 V, VGS = 4.5 V A A Typ. Max. Units V 10 nA uA A VGS = 4.5 V, ID = 4.6 A 32 VGS = 2.5 V, ID = 3.9 A 44 mΩ b Dynamic Symbol Parameter Qg Test Conditions Min Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge Publication Order Number: [MS20N04NE] VDS = 10 V , ID = 4.0 A, VGS = 4.5 V Typ. Max. Units 13.4 nC 0.9 nC 2.0 nC © Bruckewell Technology Corporation Rev. A -2014 MS20N04NE P-Channel 20-V (D-S) MOSFET b Dynamic Symbol Parameter td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time trr Source-Ddrain Reverse Recovery Time Test Conditions Min Typ. Max. Units 8 ns VDD = 10 V , RL = 15 Ω, 24 ns VGEN = 4.5 V , ID = 5 A 35 ns 10 ns 40 ns IF = 1.6 A , di/dt=100 A/uS Notes: a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Publication Order Number: [MS20N04NE] © Bruckewell Technology Corporation Rev. A -2014 MS20N04NE P-Channel 20-V (D-S) MOSFET Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MS20N04NE] © Bruckewell Technology Corporation Rev. A -2014