For more information, please visit the product page | For information on related products, view External Power Supplies date 09/12/2013 page 1 of 3 MODEL: PJ-034B │ DESCRIPTION: DC POWER JACK 2.5 mm center pin 2.5 A rating vertical orientation through hole low profile housing with plastic placement pins U • • • • • ED FEATURES SPECIFICATIONS conditions/description rated input voltage rated input current min TI parameter N RoHS contact resistance1 between terminal and mating plug between terminal in a closed circuit insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute operating temperature life flammability rating RoHS Note: units Vdc 2.5 A 50 30 mΩ mΩ MΩ 0.3 any direction for 10 seconds -25 500 Vac 3 kg 500 g 85 °C 5,000 cycles O terminal strength max 16 100 N insertion/withdrawal force typ UL94V-0 2011/65/EU 1. When measured at a current of less than 100 mA/1 kHz IS C SOLDERABILITY conditions/description min typ max units wave soldering dipped in solder pot for 5 ±0.5 seconds 255 260 265 °C D parameter cui.com For more information, please visit the product page | For information on related products, view External Power Supplies CUI Inc │ MODEL: PJ-034B │ DESCRIPTION: DC POWER JACK date 09/12/2013│ page 2 of 3 MECHANICAL DRAWING units: mm[inches] tolerance: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm MATERIAL PLATING copper nickel plated ED center pin terminal 1 brass tin plated terminal 2 copper alloy tin plated terminal 3 brass tin plated plastic PBT U 23.0 0.906 0.3 (TYP) 18.5 0.728 0.3 5.00 0.197 TI 12.2 0.480 N 10.2 0.402 2.50 0.098 N 6.40 0.252 1 3 2 0.50 0.020 (TYP) 3.0 0.118 0.3 (TYP) 2.70 0.106 (2 PLCS) O 7.60 0.299 1 7.1 0.280 IS C 3 8.50 0.335 6.10 0.240 2 2.9 0.114 4.3 0.169 3.0 0.118 1.00 0.039 (3 PLCS) D PCB LAYOUT TOP VIEW Note: 1 3 2 SCHEMATIC MATING PLUG Jack Insertion Depth: 9.5 mm Model PJ-034B Center Pin Ø2.5 mm 1. All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted. cui.com For more information, please visit the product page | For information on related products, view External Power Supplies CUI Inc │ MODEL: PJ-034B │ DESCRIPTION: DC POWER JACK date 09/12/2013│ page 3 of 3 REVISION HISTORY description date 1.0 initial release 07/30/2007 1.01 applied new spec template ED rev. 09/12/2013 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.