DIN 1.0/2.3 PCB Jack Connectors 1 • Patent-pending, closed-entry interface features a precision molded protective shroud designed to redirect misaligned pins to prevent pin stubbing and “pass-by” pins which can cause signal failure and system downtime. Product Description DIN 1.0/2.3 75 Ohm PCB Jack Connectors are available in vertical and right-angle mount designs. New product extensions include our closed-entry interface, snap-in retention board-locks, tape-and-reel packaging, and a Surface Mount (SMT) edge-mount version. • Snap-in board-lock feature secures connectors to PCB in true position prior to soldering and prevents connectors from lifting or leaning out of position during production assembly. • SMT low-profile edge-mount design sits just .278” high off PCB and is ideal for applications where height constraints or electrical performance are primary design concerns. • PCB Jacks are made with precision machined components designed to provide long-term durability, reliability, and performance. CONNECTING INNOVATION TO APPLICATION® Specifications Electrical Impedance: Frequency Range: Return Loss: Mechanical Durability: 75 Ohms DC to 4.5 GHz 3 GHz < - 15 dB 4.5 GHZ < - 10 dB 500 Cycles Minimum Material Body: Center Contacts: Insulators: Brass Beryllium Copper Teflon® Finishes Solder Tails: Board Locks: Outer Contact: Center Contact: Gold over Nickel Tin over Nickel Gold over Nickel, or Nickel Gold over Nickel This series complies with CECC 22230 specifications. Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Part Numbering KINGS® Part Number Description Drawing Number Plating Packaging Photo 034B-060-00401H PCB Jack, Right-Angle SD034B-060-00401H Gold Tray 2 034B-060-00402H PCB Jack, Right-Angle, Board-Lock, Closed-Entry SD034B-060-00402H Gold / Tin Tray 3 034B-060-00402TK PCB Jack, Right-Angle, Board-Lock, Closed-Entry SD034B-060-00402TK Nickel / Tin Tray 4 034B-060-00402TKU PCB Jack, Right-Angle, Board-Lock, Closed-Entry SD034B-060-00402TK Nickel / Tin Tape & Reel 4 0347-086-00402H PCB Jack, Edge Mount, Board-Lock, Closed-Entry SD0347-086-00402H Gold Tray 5 0347-086-00402N PCB Jack, Edge Mount, Board-Lock, Closed-Entry SD0347-086-00402NU Nickel / Gold Tray 5 0347-086-00402NU PCB Jack, Edge Mount, Board-Lock, Closed-Entry SD0347-086-00402NU Nickel / Gold Tape & Reel 5 0347-060-00401H DIN Straight PCB, .090 Solder Tail SD0347-060-00401H Gold Tray 1 0347-060-00402H DIN Straight PCB, .155 Solder Tail SD0347-060-00402H Gold Tray 1 0347-060-00407N DIN Straight PCB, Board-Lock, SMT Contacts, Closed-Entry SD0347-060-00407N Nickel / Gold Tray N/A 0347-060-00407NU DIN Straight PCB, Board Lock, SMT Contacts, Closed-Entry SD0347-060-00407N Nickel / Gold Tape & Reel N/A Spanner Wrench KTW-20-1 Winchester Electronics 199 Park Road Extension, Suite 104 Middlebury, Connecticut 06762 203.741.5400 Phone 203.741.5500 Fax www.winchesterelectronics.com Tool to install and remove DIN 1.0 / 2.3 PCB Jacks. Spanner nuts have 4 slots. April 2013