1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:49 PM Page 18 KL73 thin film inductor EU features Excellent for high frequency applications Low DC resistance and high Q Suitable for reflow and wave soldering Low tolerance ±2% available Small size allows for high density mounting (1E, 1J, 2A, 2B) • Marking: Yellow marking on blue protective coating (1E, 1J, 2A, 2B) • Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction L c Type c Marking Protective Coating W Inner Electrode t d Coil Pattern Electrode Ceramic Substrate Dimensions inches (mm) W c d L (Inch Size Code) t 1E (0402) .039±.004 .02±.002 .006±.004 .01±.004 .014±.002 (1.0±0.1) (0.5±0.05) (0.15±0.1) (0.25±0.1) (0.35±0.05) 1J (0603) .063±.008 .031±.004 .012±.004 .012±.004 (1.6±0.2) (0.8±0.1) (0.3±0.1) (0.3±0.1) .02±.004 (0.5±0.1) 2A (0805) .079±.008 .049±.008 .016±.008 .012±.004 (2.0±0.2) (1.25±0.2) (0.4±0.2) (0.3±0.2) .02±.004 (0.5±0.1) 2B (1206) .126±.008 .063±.008 (3.2±0.2) (1.6±0.2) .02±.008 (0.5±0.2) Insulation Direction Mark Film .016 (0.4 +.008 -.004 +0.2 ) -0.1 .024±.004 (0.6±0.1) Inductance Marking Part 1J (nH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 Marking L1 L2 L3 L4 22 27 33 39 47 56 68 82 Part 1J (nH) 10 12 15 18 22 27 33 39 47 56 68 82 Marking 10 12 15 H1 H2 H3 H4 H5 H6 H7 H8 H9 Part Marking 2A 2B Value (nH) 2.2 - 8.2 Value (nH) 10 and higher Ex. = 2.2 = 2.2nH Ex. = 15 = 15nH Ex. = 2N2 = 2.2nH Ex. = 15N = 15nH No marking on 1E (0402) ordering information New Part # KL73 2A Type Size Code For further information on packaging, please refer to Appendix A. 1E: 0402 1J: 0603 2A: 0805 2B: 1206 T Termination Material T: Sn TE Packaging TP: 7" paper 2mm pitch (1E only - 10,000 pieces/reel) TE: 7" embossed plastic 4mm pitch (1J, 2A, 2B - 4,000 pieces/reel) 4N7 Nominal Inductance 4N7: 4.7nH 47N: 47nH Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. G Tolerance B: ±0.1nH C: ±0.2nH G: ±2% J: ±5% 1/07/09 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 213 inductors • • • • • 1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:50 PM Page 19 KL73 thin film inductor applications and ratings inductors Part Designation Inductance (nH) KL731ETTPN56B KL731ETTPN68B KL731ETTPN82B KL731ETTP1N0* KL731ETTP1N2* KL731ETTP1N5* KL731ETTP1N8* KL731ETTP2N2* KL731ETTP2N7* KL731ETTP3N3* KL731ETTP3N9* KL731ETTP4N7* KL731ETTP5N6* KL731ETTP6N8* KL731ETTP8N2* KL731ETTP10N* KL731ETTP12N* KL731ETTP15N* KL731ETTP18N* KL731ETTP22N* KL731ETTP27N* KL731ETTP33N* KL731JTTE1N0* KL731JTTE1N2* KL731JTTE1N5* KL731JTTE1N8* KL731JTTE2N2* KL731JTTE2N7* KL731JTTE3N3* KL731JTTE3N9* KL731JTTE4N7* KL731JTTE5N6* KL731JTTE6N8* KL731JTTE8N2* KL731JTTE10N* KL731JTTE12N* KL731JTTE15N* KL731JTTE18N* KL731JTTE22N* KL731JTTE27N* KL731JTTE33N* KL731JTTE39N* KL731JTTE47N* KL731JTTE56N* KL731JTTE68N* 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 Inductance Tolerance Quality Factor Minimum Self Resonant Frequency Minimum (MHz) DC Resistance Maximum (Ω) B: ±0.1nH 7 14000 0.10 12000 0.15 10000 0.20 8000 0.25 650 0.30 600 550 500 450 B: ±0.1nH C: ±0.2nH 10 6000 0.50 5000 G: ±2% J: ±5% 7 Allowable DC Current Maximum (mA) Measured Frequency (MHz) 700 4000 3000 1.00 2500 1.50 300 250 2000 2.00 3.00 200 5.00 150 0.10 650 500 350 1500 200 1000 10 15 13000 10000 C: ±0.2nH 20 8000 0.15 6000 0.25 5000 25 4000 3000 2500 0.50 450 500 350 1.0 250 1.50 200 2000 1500 G: ±2% J: ±5% 1000 2.50 10 150 200 120 600 4.00 4.50 100 * Add tolerance character (B, C, G, J) For complete environmental specifications, please refer to pages 216. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 214 11/18/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:51 PM Page 20 PMS 300 neg. Black neg. KL73 thin film inductor applications and ratings (continued) Inductance (nH) KL732ATTE1N0* KL732ATTE1N2* KL732ATTE1N5* KL732ATTE1N8* KL732ATTE2N2* KL732ATTE2N7* KL732ATTE3N3* KL732ATTE3N9* KL732ATTE4N7* KL732ATTE5N6* KL732ATTE6N8* KL732ATTE8N2* KL732ATTE10N* KL732ATTE12N* KL732ATTE15N* KL732ATTE18N* KL732ATTE22N* KL732ATTE27N* KL732ATTE33N* KL732ATTE39N* KL732ATTE47N* KL732ATTE56N* KL732ATTE68N* KL732ATTE82N* KL732BTTE2N2* KL732BTTE2N7* KL732BTTE3N3* KL732BTTE3N9* KL732BTTE4N7* KL732BTTE5N6* KL732BTTE6N8* KL732BTTE8N2* KL732BTTE10N* KL732BTTE12N* KL732BTTE15N* KL732BTTE18N* KL732BTTE22N* KL732BTTE27N* KL732BTTE33N* KL732BTTE39N* KL732BTTE47N* KL732BTTE56N* KL732BTTE68N* KL732BTTE82N* KL732BTTE100* 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Inductance Tolerance Quality Factor Minimum 20 Self Resonant Frequency Minimum (MHz) Allowable DC Current Maximum (mA) Measured Frequency (MHz) 13000 10000 9000 C: ±0.2nH DC Resistance Maximum (Ω) 900 0.25 8000 800 6000 25 5000 4500 4000 3000 500 700 0.50 500 2500 G: ±2% J: ±5% 20 2000 1500 400 1.00 300 250 1000 1.50 15 200 800 10 25 C: ±0.2nH 35 inductors Part Designation 700 600 9000 7000 6000 5000 4500 4000 3500 3000 200 4.00 5.00 0.25 150 1000 900 500 0.50 800 2500 40 2000 1.00 G: ±2% J: ±5% 500 1500 25 1000 500 15 400 400 200 2.00 200 * Add tolerance character (B, C, G, J) For complete environmental specifications, please refer to pages 216. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1/10/06 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 215 1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:51 PM Page 21 PMS 300 neg. Black neg. KL73 thin film inductor environmental applications Performance Characteristics Parameter Requirements Maximum ∆ L/L Limit Typical inductors Resistance to Soldering Heat Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% Rapid Change of Temperature Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% Low Temperature Exposure Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% High Temperature Exposure Without distinct damage in appearance and construction ∆ L/L: ±2%, ∆ Q/Q: ±20% Test Method ∆ L/L: ±0.5% ∆ Q/Q: ±1.5% 260°C ± 5°C, 10s ± 1s ∆ L/L: ±0.5% ∆ Q/Q: ±1.6% -40°C (30min.)/ +125°C (30min.) 100 cycles ∆ L/L: ±0.7% ∆ Q/Q: ±1.2% -40°C ± 3°C, 1000h ∆ L/L: ±0.4% ∆ Q/Q: ±1.3% 125°C ± 2°C, 1000h Moisture Exposure Without distinct damage in appearance and construction ∆ L/L: ±0.4% Insulation resistance: 50MΩ or more ∆ Q/Q: ±1.4% ∆ L/L: ±2%, ∆ Q/Q: ±20% 40°C ± 2°C, 90%~95%RH, 1000h Resistance to Solvent Without distinct damage in ∆ L/L: ±0.6% appearance, construction and marking ∆ Q/Q: ±1.2% ∆ L/L: ±2%, ∆ Q/Q: ±20% Immerse the inductors for 30s ± 5s in the reagent (20°C ~ 25°C) of JIS K8839 (1995) Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 216 1/07/09 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com