1733 Reader's Spreads pg1-203:document 1/27/09 4:08 PM Page 95 high voltage power resistors EU features • PSN is made completely moisture preventive to be PSO • PN is a non-inductive type and can be used for high frequency • PWW resistors, which are non-inductive wirewound resistors for high voltage with resistance wires wound on insulation pipes • PAP resistors are non-inductive wirewound resistors with inductance less than PWW, can be used for pulse wave measurement, impulse generators, etc. and have the same dimensions as PWW resistors NEW dimensions and construction PSN • PV PN, PWW, PAP Insulation coating Electrode Cap Size Code Insulation coating D D Adhesive Electrode Cap Adhesive Resistive Wire Ceramic Core or FRP pipe Resistor H L Electrode Cap Insulation Oil Insulation Pipe D PSO H L PSN Insulation Coating H L EW N ordering information New Part # Pb free PSN 0.5 CP RoHs PSN 0.5 CP Product Code PSN PV PSO PN PWW PAP Power Rating 0.5 : 2W 1 : 5W 2 : 10W 3 : 25W 4 : 50W 5 : 125W 6 : 250W *1: See Appendix C Cap* C M MS CP PSN-0.5 PSN-1 PSN-2 PSN-3 PSN-4 PSN-5 PSN-6 PV-0.5 PV-1 PV-2 PV-5 PV-8 PSO-0.5 PSO-1 PSO-2 PSO-3 PSO-4 PSO-5 PSO-6 PN-0.5 PN-1 PN-2 PN-3 PN-4 PWW-3, PAP-3 PWW-4, PAP-4 PWW-5, PAP-5 PWW-6, PAP-6 L 50±2 100±2 200±2 300±2 400±3 500±3 1000±5 80±2 150±2 250±2 55±5 105±5 205±5 320±5 420±5 530±5 1050±5 50±2 100±2 200±2 300±2 400±2 300±2 400±3 500±3 1000±5 17.5 10 24 33 45 15 62 25 9.5 8 17.5 24 33 10 15 20 20 30 85 250 600 800 1350 12 23 45 105 220 120 150 370 760 1900 3500 6200 25 55 80 100 125 310 • 250 660 • 510 1330 • 960 2700 • 1850 20 28 10 38 46 65 20 80 25 8 17 Weight (g) 12 33 45 20 62 25 A 105 J F A 105 J RoHS Holder C Termination Material CP C:Sn/Cu (ø1.0mm) T:Sn(ø1.2mm) C, M Nil:Ni Dimensions inches D±0.5 H (Nominal) Nil: No Holder A B Nominal Resistance 3 digits Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. Tolerance J : ±5% K : ±10% M : ±20% 12/28/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 97 resistors PSN, PV, PSO, PN, PWW, PAP 1733 Reader's Spreads pg1-203:document 1/27/09 4:08 PM Page 96 PMS 300 neg. Black neg. PSN, PV, PSO, PN, PWW, PAP applications and ratings Part Designation PSN-0.5 PSN-1 PSN-2 PSN-3 PSN-4 PSN-5 PSN-6 PV-0.5 PV-1 PV-2 PV-5 PV-8 PSO-0.5 PSO-1 PSO-2 PSO-3 PSO-4 PSO-5 PSO-6 PN-0.5 PN-1 PN-2 PN-3 PN-4 PWW-3 PAP-3 PWW-4 PAP-4 PWW-5 PAP-5 PWW-6 PAP-6 Resistance Range (Ω) J: ±5% K: ±10% M: ±20% (E24) 500~500M 1k~1G 2k~2G 3k~3G 4k~4G 5k~5G 6k~6G 500~500M 1k~1G 1.5k~1.5G 2.5k~2.5G 2.5k~2.5G 500~500M 1k~1G 2k~2G 3k~3G 4k~4G 5k~5G 6k~6G 50~500k 100~1M 200~2M 300~3M 400~4M 10~800 10~400 15~1500 10~800 25~2500 15~1000 50~5000 25~2000 Power Rating (W) 2 5 10 25 50 125 250 2 4 7 12 20 1.5 4 8 20 40 100 200 1.5 3 6 9 12 25 50 100 200 T.C.R. (x10-6/K) ±1500: +25°C/-15°C ±1000: +25°C/+85°C (R<1GΩ) ±3000 (R≥1GΩ) Impulse Withstand Voltage 15kV 30kV 60kV 90kV 120kV 150kV 300kV 24kV 20kV 40kV 80kV 120kV 160kV 200kV 400kV 32kV 45kV 60kV 75kV 100kV 15kV 30kV 60kV 90kV 120kV 150kV 300kV — — — — — 20kV 40kV 80kV 120kV 160kV 200kV 400kV 20kV 40kV 80kV 120kV 160kV Operating Temperature Range Inductance (µH) Maximum -30°C~+125°C — -15°C~+60°C -30°C~+125°C 20 3 35 6 70 12 150 25 160kV — — — 200kV Holder Dimensions (mm) 45゜ 45゜ B 45゜ E 45゜ E W 2 80 1 PSN, PV, PN PWW, PAP 2 PSO G 100 G 1 Maximum Working Voltage 120kV environmental applications Derating Curve % Rated Power resistors high voltage power resistors 1 R R t t 60 F M M F 2 40 20 0 -40 -20 -30 -15 0 20 40 -25 60 80 140 120 125 100 Ambient Temperature (°C) Performance Characteristics Parameter Resistance Requirements ∆ R±% Within specified tolerance T.C.R. Within specified T.C.R. Rapid Change of Temperature 5 Voltage Characteristics 3 Moisture Resistance 5 : 10 : 5 : 10 : Endurance at 25°C R<100MΩ R≥100MΩ R<100MΩ R≥100MΩ Type PSN-0.5, PSN-1, PV-2 PSN-2, PV-5 PSN-3, PV-8 PSN-4 PSN-5, PSN-6 R 8.5 11.5 16 22 30 E 11 15 18 20 25 F 16 18 24 36 46 G 24 32 40 59 74 M t 0.8 ø6.5 1.0 ø4.2 1.5±0.5 1.5±1.0 2.0±1.0 (PWW, PAP: Please contact factory for details) Test Method 25°C ±1500 : +25°C/-15°C R<1GΩ ±1000 : +25°C/+85°C R≥1GΩ ±3000 : +25°C/-15°C, +25°C/+85°C -30°C (30 minutes)/+85°C (30 minutes) 5 cycles Except for PSN Rated voltage or max. working voltage, whichever is lower and 1/10 of its voltage 40°C, 90%~95%RH, 250 hours 25°C, 500 hours 25°C, 500 hours, Continuous load Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 98 1.5 1.5 W 12/28/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com