Junction Blocks 3/8 “ Pass Thru Stud Block Specifications: Voltage Rating: Locknut Torque: Body Mounting Nut Torque: Materials: Operating Temperature Range: Our 3/8” pass-thru stud has a high electrical rating and low resistance due to a large cross-sectional contact area. It also uses highly conductive materials to outperform the competition. 400A 54.2 Nm 13.6 Nm Body-Nylon 66 (120˚C) Contact - Copper 110 Studs - Zinc-plated steel Locknut - Zinc-plated steel Body nut - Nylon 66 Stud caps - PVC -40˚C - 125˚C Dimensions in millimeters R16.7 [R0.66] This pass-thru stud boasts high installation torque values to allow the use of large cable sizes for high current applications. Stud caps are included to protect from accidental shorts. The pass-thru stud is available with red or black body and stud cap to help color-code circuits in the vehicle. A plastic body locknut ensures quick and easy firewall-mount installation without the need for additional hardware. STUD CAPS USED ON BOTH SIDES OF BLOCK 28.7 [1.13] TYPICAL PANEL CUTOUT 38.1 [1.50] Part Number 19.1 [0.75] Color JBPT0001Z Red JBPT0002Z Black 6.4 [0.25] 38.1 [1.50] 3/8-16 BOLTS PLASTIC BODY LOCKNUT 1 www.littelfuse.com 3/8-16 NUT USED ON BOTH SIDES OF BLOCK © 2009 Littelfuse • Automotive Circuit Protection Products