Fuse Holder MEGA®-FLEX Holder for MEGA® Fuses Specifications: Max. Voltage Rating: Max. Current Rating: Operating Temperature Range: Wire Size: Recommended Fuse Installation Torque: Recommended Mounting (using M6 Screw/Washer) : Base Material: Cover Material: 32 VDC 500A -40˚C to +125˚C 70 - 8 mm2 12 - 18Nm 5Nm UL94V0 Glassfilled PPA UL94V0 Elastomer The MEGA® -FLEX fuse holder is used with the MEGA® style bolt-down fuse, which is available up to 500A. This holder offers a flexible cover, which allows cable entry from virtually any direction, large wire size, and ring terminal stack up. Slots on the base allow holder to be mounted with tie wraps. Dovetail features allow you to interlock multiple MEGA® -FLEX fuse holders together for a high power distribution block. Bus bars are avalable for multiple holder applications. 1 Part Number Description Material (Studs and hardware) 02981028HXFCB Base-only (No Hardware) Zinc-Plated Steel 02981028HXFCC Cover-only - 02981028HXFC Assembly Zinc-Plated Steel 02981028HXFC-SS Assembly Stainless Steel 882-835-2 2-Position bus Bar Tin-Plated Copper 882-835-3 3-Position bus Bar Tin-Plated Copper 882-835-4 4-Position bus Bar Tin-Plated Copper 882-835-5 5-Position bus Bar Tin-Plated Copper www.littelfuse.com © 2009 Littelfuse • Automotive Circuit Protection Products Fuse Holder MEGA®-FLEX Holder for MEGA® Fuses Dimensions in mm 2 www.littelfuse.com © 2009 Littelfuse • Automotive Circuit Protection Products