Bulletin PD-20519 rev. L 07/04 10MQ060N SCHOTTKY RECTIFIER 2.1 Amp IF(AV) = 2.1Amp VR = 60V Description/ Features Major Ratings and Characteristics Characteristics The 10MQ060N surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Value Units 2.1 A VRRM 60 V I FSM @ tp = 5 µs sine 40 A High frequency operation 0.63 V Guard ring for enhanced ruggedness and long term reliability - 55 to 150 °C IF DC Small foot print, surface mountable Low forward voltage drop VF @ 1.5Apk, TJ=125°C TJ range Case Styles 10MQ060N SMA www.irf.com 1 10MQ060N Bulletin PD-20519 rev. L 07/04 Voltage Ratings Part number VR 10MQ060N Max. DC Reverse Voltage (V) 60 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 10MQ Units A Conditions IF(AV) Max. Average Forward Current * See Fig. 4 1.5 IFSM Max. Peak One Cycle Non-Repetitive 40 Surge Current * See Fig. 6 10 EAS Non-Repetitive Avalanche Energy 2.0 mJ IAR Repetitive Avalanche Current 1.0 A 10MQ Units 0.63 V @ 1A 0.71 V @ 1.5A 0.57 V @ 1A 0.63 V @ 1.5A A 50% duty cycle @ T L = 120 °C, rectangular wave form. On PC board 9mm2 island(.013mm thick copper pad area) 5µs Sine or 3µs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 1A, L = 4mH Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) * See Fig. 1 IRM Max. Reverse Leakage Current (1) 0.5 mA TJ = 25 °C * See Fig. 2 7.5 mA TJ = 125 °C TJ = T J max. VF(TO) Threshold Voltage 0.45 V rt 86.8 mΩ Forward Slope Resistance C T LS Conditions Typical Junction Capacitance 31 pF Typical Series Inductance 2.0 nH 10000 V/µs dv/dt Max. Voltage Rate of Change TJ = 25 °C TJ = 125 °C VR = rated VR VR = 10VDC, TJ = 25°C, test signal = 1Mhz Measured lead to lead 5mm from package body (Rated VR) (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 10MQ TJ Max. Junction Temperature Range (*) -55 to 150 Tstg Max. Storage Temperature Range RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight 80 SMA Device Marking IR1H dTj < 1 Rth( j-a) Conditions °C °C °C/W DC operation 0.07(0.002) g (oz.) Case Style (*) dPtot 2 - 55 to 150 Units Similar D-64 thermal runaway condition for a diode on its own heatsink www.irf.com 10MQ060N Bulletin PD-20519 rev. L 07/04 100 Reverse Current - I R (mA) 10 TJ= 150°C 125°C 1 100°C 0.1 75°C 50°C 0.01 25°C 0.001 TJ= 125°C TJ= 25°C 0.0001 0 10 20 30 40 50 60 Reverse Voltage - V R (V) Fig. 2 - Typical Peak Reverse Current Vs. Reverse Voltage 1 100 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Junction Capacitanc e - C T (pF) Instantaneous Forward Current - I F (A) TJ= 150°C 10 TJ= 25°C 10 0 10 20 30 40 50 60 Reverse Voltage - V R(V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 10MQ060N 150 1.4 140 1.2 Average Power Loss - (Watts) Allowable Case Temperature - (°C) Bulletin PD-20519 rev. L 07/04 DC 130 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 110 100 90 Square wave (D = 0.50) 80% Rated V R applied 80 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 1 0.8 DC RMSLimit 0.6 0.4 0.2 see note (2) 70 0 0.4 0.8 1.2 1.6 2 0 2.4 0 Average Forward Current - I F(AV) (A) 0.4 0.8 1.2 1.6 2 2.4 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature Non-Repetitive Surge Current - I FSM (A) 100 10 At Any Rated Load Condition And With Rated V RRM Applied Following Surge 1 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); I R @ VR1 = 80% rated VR 4 www.irf.com 10MQ060N Bulletin PD-20519 rev. L 07/04 Outline Table CA T HO DE Device Marking: IR1H 1.40 (.055) 1.60 (.062) 1 2.50 (.098) 2.90 (.114) A N OD E 2 1 P OLA R IT Y 4.00 (.157) 2 P ART NU MBE R 4.60 (.181) .152 (.006) .305 (.012) 1.47 MIN. (.058 MIN.) 2.00 (.078) 2.44 (.096) .103 (.004) .203 (.008) 0.76 (.030) 1.52 (.060) 4.80 (.188) 5.28 (.208) 2.10 MAX. (.085 MAX. ) 1.27 MIN. (.050 MIN.) 5.53 (.218) SOLDERING PAD Outline SMA Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IR1H VOLTAGE CURRENT IR LOGO YYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free" www.irf.com 5 10MQ060N Bulletin PD-20519 rev. L 07/04 Tape & Reel Information Dimensions in millimetres and (inches) Ordering Information Table Device Code 10 M Q 060 N TR - 1 2 3 4 5 6 7 1 - Current Rating 2 - M = SMA 3 - Q = Schottky Q Series 4 - Voltage Rating (060 = 60V) 5 - N = New SMA 6 - y none = Box (1000 pieces) y TR = Tape & Reel (7500 pieces) 7 y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/04 6 www.irf.com