RoHS Compliant Mini-TurboCapTM Small Footprint, High Volumetric Efficiency, High-CV SMPS Capacitors The RoHS Compliant Mini-TurboCapTM is constructed from state-of-the-art BME (Base Metal Electrode) MLC Capacitors achieving very high CV, as well as, ultra low ESR and ESL. The resulting, very large capacitance values allow for component and board space reduction. Stress relieving lead frames provide effective mechanical decoupling of the ceramic chips from the board, minimizing the stress created by board flexing, vibration and temperature cycling. High temperature solder is used to attach chips to the lead frame thus eliminating the risk of solder reflow during assembly to the board. CAPACITANCE RANGE Style RT10 VOLTAGE 50V 100V 18 μF 8.2 μF HOW TO ORDER RT10 5 C 186 M A K 02 AVX Style Voltage 50V = 5 100V = 1 Temperature Coefficient X7R = C Capacitance Code (2 significant digits + no. of zeros) 1 μF = 105 10 μF = 106 Capacitance Tolerance M = ±20% Test Level A = Standard Termination N = Straight Lead K = Leads formed in M = Leads formed out Number of Leads Per Side 02 = 2 ELECTRICAL SPECIFICATIONS Temperature Coefficient ±15%, -55° to +125°C Capacitance Test (MIL-STD-202, Method 305) 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz Dissipation Factor 5% Max @ 25°C, for 50VDC and 100VDC voltage ratings Insulation Resistance 25°C (MIL-STD-202, Method 302) 500 MΩ-μF Insulation Resistance 125°C (MIL-STD-202, Method 302) 50 MΩ-μF Dielectric Withstanding Voltage 25°C (Flash Test) 250% rated voltage for 5 seconds with 50 mA max charging current. Life Test Capabilities (1000 hrs) 150% rated voltage at +125°C. 1 RoHS Compliant Mini-TurboCapTM Small Footprint, High Volumetric Efficiency, High-CV SMPS Capacitors STYLE/DIMENSIONS E D A B 1.397 (0.055) ±0.254 (0.010) 0.508 (0.020) TYP. 6.35 (0.25) MIN. 2.54 (0.100) TYP. C 1.27 (0.050) MAX. 0.635 (0.025) MIN. 2 LEADS PER SIDE LEAD THICKNESS = 0.254 (0.010) TYP. TOP VIEW “N” STYLE LEADS B E D A 1.14 (0.045) ±0.254 (0.010) 0.254 (0.010) RAD. TYP. 1.397 (0.055) ±0.127 (0.005) 0.508 (0.020) TYP. C 2.54 (0.100) TYP. 1.27 (0.050) MAX. 0.635 (0.025) MIN. 2 LEADS PER SIDE LEAD THICKNESS = 0.254 (0.010) TYP. TOP VIEW “K” STYLE LEADS B E D A 1.14 (0.045) ±0.254 (0.010) 0.254 (0.010) RAD. TYP. 1.397 (0.055) ±0.127 (0.005) 0.508 (0.020) TYP. C 2.54 (0.100) TYP. 1.27 (0.050) MAX. 0.635 (0.025) MIN. 2 LEADS PER SIDE LEAD THICKNESS = 0.254 (0.010) TYP. TOP VIEW “M” STYLE LEADS DIMENSIONS 2 millimeters (inches) Style A (max.) B (max.) RT10 5.59 (0.220) 7.00 (0.275) C ± 0.635 (± 0.025) 3.81 (0.150) D ± 0.635 (± 0.025) 5.33 (0.210) E (max.) 4.83 (0.190) No. of Leads Per Side 02