August 9, 2011 IRS2001MPBF HIGH AND LOW SIDE DRIVER Features • • • • • • • • • • Floating channel designed for bootstrap operation Fully operational to +200V Tolerant to negative transient voltage, dV/dt immune Gate drive supply range from 10V to 20V Undervoltage lockout 3.3V, 5V, and 15V logic compatible Cross-conduction prevention logic Matched propagation delay for both channels Outputs in phase with inputs Leadfree, RoHS compliant Description Product Summary Topology General Driver VOFFSET ≤ 200V VOUT 10V – 20V Io+ & I o- (typical) 290mA & 600mA ton & toff (typical) 160ns & 150ns Delay Matching (Max.) 50ns Package Options The IRS2001 is a high voltage, high speed power MOSFET and IGBT driver with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver crossconduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 200V. MLPQ4x4 - 16 Leads (Without 2 leads) Typical Connection * Qualification standards can be found on IR’s web site www.irf.com © 2008 International Rectifier IRS2001MPBF † Qualification Information †† Qualification Level Moisture Sensitivity Level Machine Model ESD Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant Industrial (per JEDEC JESD 47) Comments: This IC has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. ††† MSL2 MLPQ4x4 14L (per IPC/JEDEC J-STD-020) Class A (+/-200V) (per JEDEC standard JESD22-A115A) Class 1C (+/-2000V) (per JEDEC standard JESD22-A114F) Class III (+/-1000V) (per JEDEC standard JESD22-C101D) Class II, Level B (per AEC-Q100-004) Yes † †† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com © 2008 International Rectifier 2 IRS2001MPBF Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol VB VS VHO VCC VLO VIN dVS/dt PD RthJA TJ TS TL Definition High side floating absolute voltage High side floating supply offset voltage High side floating output voltage Low side and logic fixed supply voltage Low side output voltage Logic input voltage (HIN & LIN) Allowable offset supply voltage transient Package power dissipation @ TA ≤ 25°C Thermal resistance, junction to ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) Min. Max. -0.3 225 VB - 25 VS - 0.3 -0.3 -0.3 -0.3 — — — — -55 — VB + 0.3 VB + 0.3 25 VCC + 0.3 VCC + 0.3 50 2.08 36 150 150 300 Units V V/ns W °C/W °C Recommended Operating Conditions The input/output logic timing diagram is shown in Fig 1. For proper operation the device should be used within the recommended conditions. The VS offset rating is tested with all supplies biased at 15V differential. Symbol VB VS VHO VCC VLO VIN TA Definition High side floating supply absolute voltage High side floating supply offset voltage High side floating output voltage Low side and logic fixed supply voltage Low side output voltage Logic input voltage Ambient temperature Min. Max. VS + 10 † VS 10 0 0 -40 VS + 20 200 VB 20 VCC VCC 125 Units V °C † Logic operational for VS of -5V to +200V. Logic state held for VS of -5V to –VBS. (Please refer to the Design Tip DT97-3 for more details). www.irf.com © 2008 International Rectifier 3 IRS2001MPBF Dynamic Electrical Characteristics VBIAS (VCC, VBS ) = 15V, CL = 1000pF, TA = 25°C unless otherwise specified. Symbol ton toff tr tf MT Definition Turn-on propagation delay Turn-off propagation delay Turn-on rise time Turn-off fall time Delay Matching, HS & LS turn-on/off Min — — — — — Typ 160 150 70 35 — Max 220 220 170 90 50 Units Test Conditions VS = 0V VS = 200V ns Static Electrical Characteristics VBIAS(VCC, VBS )= 15V and TA = 25°C unless otherwise specified. The VIN, VTH, and IIN parameters are referenced to COM. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO and LO. Symbol VIH VIL VOH VOL ILK IQBS IQCC IIN+ IINVCCUV+ VCCUV- IO+ Definition Logic “1” input voltage Logic “0” input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Offset supply leakage current Quiescent VBS supply current Quiescent VCC supply current Logic “1” input bias current Logic “0” input bias current VCC supply undervoltage positive going threshold VCC supply undervoltage negative going threshold Min 2.5 — — — — — — — — Typ — — 0.05 0.02 — 30 150 3 — Max — 0.8 0.2 0.1 50 55 270 10 5 8.0 8.9 9.8 7.4 8.2 9.0 Output high short circuit pulsed current 130 290 — Units VCC = 10V to 20V V IO = 2mA VB = VS = 200V µA VIN = 0V or 5V VIN = 5V VIN = 0V V mA IO- Test Conditions Output low short circuit pulsed current 270 www.irf.com 600 — VO = 0V, VIN = Logic “1” PW ≤ 10 µs VO = 15V, VIN = Logic “0” PW ≤ 10 µs © 2008 International Rectifier 4 IRS2001MPBF Functional Block Diagram www.irf.com © 2008 International Rectifier 5 IRS2001MPBF Lead Definitions PIN Symbol Description 1 NC No connection 2 HIN Logic input for high side gate driver output (HO), in phase 3 LIN Logic input for low side driver output (LO), in phase 4 COM Low side return 5 NC No Connection 6 NC No Connection 7 LO Low side gate drive output 8 NC No Connection 9 NC No Connection 10 NC No Connection (pin removed) 11 VS High side floating supply return 12 HO High side gate drive output 13 VB/VBZ 14 NC No Connection 15 NC No Connection (pin removed) 16 VCC/VCCZ High side floating supply Low side and logic fixed supply VCC/ VCCZ NC NC VB/ VBZ NC NC LO NC Lead Assignments www.irf.com © 2008 International Rectifier 6 IRS2001MPBF Application Information and Additional Details Figure 2: Switching Time Waveform Definitions Figure 1: Input/Output Timing Diagram Figure 3: Delay Matching Waveform Definitions www.irf.com © 2008 International Rectifier 7 IRS2001MPBF www.irf.com © 2008 International Rectifier 8 IRS2001MPBF www.irf.com © 2008 International Rectifier 9 IRS2001MPBF www.irf.com © 2008 International Rectifier 10 IRS2001MPBF www.irf.com © 2008 International Rectifier 11 IRS2001MPBF www.irf.com © 2008 International Rectifier 12 IRS2001MPBF www.irf.com © 2008 International Rectifier 13 IRS2001MPBF Package Details: MLPQ 4x4 -14L www.irf.com © 2008 International Rectifier 14 IRS2001MPBF Tape and Reel Details: MLPQ 4x4 - 14L www.irf.com © 2008 International Rectifier 15 IRS2001MPBF Part Marking Information Pin 1 Identifier IR logo S2001M Part number Assembly site Code ?YWW ? XXXXX Date code ? MARKING CODE P Lead Free Released Non-Lead Free Released - Lot Code (Prod mode – 4 digit SPN code) Ordering Information Standard Pack Base Part Number IRS2001 Package Type MLPQ 4x4-14L Complete Part Number Form Quantity Tube/Bulk 92 IRS2001MPBF Tape and Reel 3,000 IRS2001MTRPBF The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to change without notice. This document supersedes and replaces all information previously supplied. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com © 2008 International Rectifier 16 IRS2001MPBF Revision History Date 9/15/09 06/18/2010 Comment Initial draft converted from SO8 data sheet Included Qual Info Page www.irf.com © 2008 International Rectifier 17