BSL205N OptiMOS®2 Small-Signal-Transistor Product Summary Features V DS • Dual N-channel R DS(on),max • Enhancement mode • Super Logic level (2.5V rated) 20 V V GS=4.5 V 50 mΩ V GS=2.5 V 85 ID 2.5 A • Avalanche rated • Qualified according to AEC Q101 PG-TSOP6 • Pb-free lead plating; RoHS compliant 6 5 4 1 2 3 Type Package Tape and Reel Information Marking Lead Free Packing BSL205N PG-TSOP6 L6327: 3000 pcs/ reel sPK Yes Non dry Maximum ratings, at T j=25 °C, unless otherwise specified Parameter (1) Symbol Conditions Continuous drain current ID Value T A=25 °C 2.5 T A=70 °C 2.0 10 Pulsed drain current I D,pulse T A=25 °C Avalanche energy, single pulse E AS I D=2.5 A, R GS=25 Ω 10.8 Reverse diode dv /dt dv /dt I D=2.5 A, V DS=16 V, di /dt =200 A/µs, T j,max=150 °C 6 Gate source voltage V GS Power dissipation(3) P tot Operating and storage temperature T j, T stg ESD Class T A=25 °C JESD22-A114 -HBM Soldering Temperature Rev 2.2 A mJ kV/µs ±12 V 0.5 W -55 ... 150 °C class 0 (<250V) 260 °C IEC climatic category; DIN IEC 68-1 (1) Unit 55/150/56 Remark: one of both transistors in operation. page 1 2010-03-26 BSL205N Parameter Values Symbol Conditions Unit min. typ. max. - - 250 Thermal characteristics Thermal resistance, junction - ambient R thJA minimal footprint(2) K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS= 0 V, I D= 250 µA 20 - - Gate threshold voltage V GS(th) V DS=VGS, I D=11 µA 0.6 0.95 1.2 Drain-source leakage current I DSS V DS=20 V, V GS=0 V, T j=25 °C - - 1 V DS=20 V, V GS=0 V, T j=150 °C - - 100 V µA Gate-source leakage current I GSS V GS=12 V, V DS=0 V - - 100 nA Drain-source on-state resistance R DS(on) V GS=2.5 V, I D=1.95 A - 62 85 mΩ V GS=4.5 V, I D=2.5 A - 39 50 |V DS|>2|I D|R DS(on)max, I D=2 A - 8.6 - Transconductance g fs S (2) Performed on 40mm2 FR4 PCB. The traces are 1mm wide, 70µm thick and 20mkm long; they are present on both sides of the PCB. Rev 2.2 page 2 2010-03-26 BSL205N Parameter Values Symbol Conditions Unit min. typ. max. - 315 419 - 114 152 Dynamic characteristics Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss - 16 24 Turn-on delay time t d(on) - 5.8 - Rise time tr - 2.9 - Turn-off delay time t d(off) - 11.0 - Fall time tf - 2.4 - Gate to source charge Q gs - 0.65 0.86 Gate to drain charge Q gd - 0.5 0.7 Gate charge total Qg - 2.1 3.2 Gate plateau voltage V plateau - 2 - V - - 0.5 A - - 10 - 0.8 1.1 V - 10 - ns - 2.2 - nC V GS=0 V, V DS=10 V, f =1 MHz V DD=10 V, V GS=4.5 V, I D=2.5 A, R G=6 Ω pF ns Gate Charge Characteristics V DD=10 V, I D=2.5 A, V GS=0 to 4.5 V nC Reverse Diode Diode continous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD Reverse recovery time t rr Reverse recovery charge Q rr Rev 2.2 T A=25 °C V GS=0 V, I F=2.5 A, T j=25 °C V R=10 V, I F=2.5 A, di F/dt =100 A/µs page 3 2010-03-26 BSL205N 2 Drain current P tot=f(T A) I D=f(T A); V GS≥4.5 V 0.6 3 0.5 2.5 0.4 2 I D [A] P tot [W] 1 Power dissipation 0.3 1.5 0.2 1 0.1 0.5 0 0 0 40 80 120 160 0 40 T A [°C] 80 120 160 T A [°C] 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T A=25 °C; D =0 Z thJA=f(t p) parameter: t p parameter: D =t p/T 102 103 0.5 101 10 µs 102 100 µs 0.2 1 ms 0.1 100 I D [A] Z thJA [K/W] 10 ms 10 -1 0.05 101 0.02 0.01 DC 100 10 10-1 10-3 0.1 1 10 100 10-5 10-4 10-3 10-2 10-1 100 101 102 t p [s] V DS [V] Rev 2.2 single pulse -2 page 4 2010-03-26 BSL205N 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 10 100 4.5 V 3V 2.2 V 90 2.5 V 8 80 2.5 V 70 2.4 V I D [A] R DS(on) [mΩ] 6 4 2.2 V 60 3V 50 3.5 V 4.5 V 40 6V 30 2 20 2V 10 1.8 V 0 0 0 1 2 3 0 2 4 V DS [V] 6 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C 4 20 3 15 g fs [S] I D [A] 7 Typ. transfer characteristics 2 25 °C 1 10 10 5 150 °C 0 0 0 1 2 3 V GS [V] Rev 2.2 8 I D [A] 0 2 4 6 8 I D [A] page 5 2010-03-26 BSL205N 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=2.5 A; V GS=4.5 V V GS(th)=f(T j); V DS=VGS; I D=11 µA parameter: I D 100 1.6 80 98 % 60 98 % V GS(th) [V] R DS(on) [mΩ] 1.2 typ 40 typ 0.8 2% 0.4 20 0 0 -60 -20 20 60 100 140 180 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz; Tj=25°C I F=f(V SD) parameter: T j 103 101 25 °C 100 Coss 10 I F [A] C [pF] Ciss 2 10-1 150 °C 150 °C, 98% 10-2 25 °C, 98% Crss 101 10-3 0 5 10 15 20 V DS [V] Rev 2.2 0 0.4 0.8 1.2 1.6 V SD [V] page 6 2010-03-26 BSL205N 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=2.5 A pulsed parameter: T j(start) parameter: V DD 101 8 7 6 25 °C 10 V 100 °C 10 V GS [V] I AV [A] 5 0 125 °C 4V 16 V 4 3 2 1 10-1 0 100 101 102 103 0 1 2 3 4 Q gate [nC] t AV [µs] 15 Drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS)=f(T j); I D=250 µA 25 V GS 24 Qg 23 V BR(DSS) [V] 22 21 20 V g s(th) 19 18 Q g(th) 17 Q sw Q gs 16 -60 -20 20 60 100 Q g ate Q gd 140 T j [°C] Rev 2.2 page 7 2010-03-26 BSL205N Package Outline: TSOP6 2.9 ±0.2 (2.25) 1.1 MAX. B 0.1 MAX. 1 2 3 0.35 +0.1 -0.05 0.2 M B 6x 0.15 +0.1 -0.06 0.95 0.2 1.9 M 1.6 ±0.1 4 10˚ MAX. 5 2.5 ±0.1 6 0.25 ±0.1 10˚ MAX. (0.35) A A GPX09300 Footprint: Packaging: 0.5 0.2 2.7 8 2.9 1.9 4 0.95 Remark: Wave soldering possible dep. on customers process conditions Pin 1 marking 3.15 1.15 CPWG5899 HLG09283 Dimensions in mm Rev 2.2 page 8 2010-03-26 BSL205N Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev 2.2 page 9 2010-03-26