Document reference: PCB reference: STEVAL-IDB005V1D Item Quant ity 1 4 C1, C17, C20, C22 2 3 4 5 6 7 8 6 2 1 2 1 1 2 C2, C16, C18, C19, C21, C23 C3, C15 C4 C5, C6 L1 L2 C13, C14 9 1 D1 10 1 JP1 HEADER 1X3 11 1 J1 THR 1.27 mm 2x5 pins 12 1 J2 RF_IN/OUT 13 2 J3, J4 HEADER 5X2 14 1 Q1 XTAL XTAL‐LS NX3215SA NDK 15 1 Q2 XTAL XTAL‐HS XTAL_32_25_REV2 NDK 16 5 R1, R3, R4, R5, R6 SM/R_0402 Tyco Electronics Not Assembly 17 18 19 1 2 1 R2 R7, R9 U1 10k_0402 100k_0402 BlueNRG‐MS Tyco Electronics Tyco Electronics STMicroelectronics 10k 100k BLUENRG-MSQTR 20 1 U2 HEADER 1X2 21 22 23 1 1 3 U3 U4 SOSCOUT, AUXADP, AUXADN STMicroelectronics STMicroelectronics M95640-RMN6 BALF-NRG-01D3 Reference Part 1u_0402_X5R 100n_0402_X7R 100p_0402_C0G 150n_0402_X5R 22p_0402_C0G TBD_0402 TBD_0402 TBD_0402_C0G Soldered between pins 1 and 2 EEPROM Balun Test point Manufacturer’s ordering code / Orderable Part Number Note Package Manufacturer VBAT & SMPS OUT filter cap VBAT filtering VBAT filtering VREG filtering XTAL-LS load cap XTAL-HS filtering XTAL-HS filtering XTAL-HS load cap SM/C_0402 Murata GRM155R61A105KE15 1uF SM/C_0402 SM/C_0402 SM/C_0402 SM/C_0402 SM/L_0402 SM/L_0402 SM/C_0402 Murata Murata Murata Murata Any Murata Murata GRM155R71C104KA88 GRM1555C1H101JZ01 GRM155R61A154KE19 GRM1555C1H220JZ01 Any LQG15HN2N0S02 GRM1555C1H150JZ01 100nF 100pF 150nF 22pF R0 2.0nH 15pF SMPS out inductor SM/L_0805 Murata LQM21FN100M70L 10uH SAMTEC FTSH-105-01-F-D-K Emerson 142-0701-881 +8 dBm WALCON.100/VH/T Male Strip 1X3, 100 mils M2OE/W.325/10/M OD JTAG connector SMA Jack Assembly, End Launch SMA-LAT WALCON.100/VH/T Male Strip 2X5, 100 mils, M2OE/W.325/10/M BOTTOM MOUNT OD Connect to Vdd, pulldown Connect to ground Pull-up and pull-down SM/R_0402 SM/R_0402 RF IC QFN32 WALCON.100/VH/T Male Strip 1X2, 100 mils M2OE/W.325/10/M OD Memory SO8N Integrated balun Test point TP NX3215SA‐32.768kHz‐EXS00A‐ MU00003 NX3225SA ‐16.000MHz‐EXS00A‐ CS05997 32.768 kHz 16 MHz Not Assembly