Photoelectric sensors OPDK 14 (Laser, standard version) Retro-reflective sensors sample drawing 31 Teach-in 2 4 6 4,3 43 * 25,2 M 8 x1 LED 35 4,3 LED 3,75 14,8 * emitter and receiver axis general data sample picture type retro-reflective laser sensor version single lens optics light source pulsed red laser diode actual range Sb 10 m nominal range Sn 11 m repeat accuracy < 0,1 mm at laser focus polarization filter yes alignment / soiled lens indicator flashing light indicator light indicator LED yellow power on indication LED green sensitivity adjustment Teach-in laser class 1 distance to focus 400 mm wave length 650 nm laser warning electrical data response time / release time < 0,25 ms voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 35 mA current consumption typ. 25 mA voltage drop Vd < 2,2 VDC output function light / dark operate output circuit PNP output current < 100 mA short circuit protection yes reverse polarity protection yes CLASS 1 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 mechanical data width / diameter 14,8 mm height / length 43 mm depth 31 mm type rectangular housing material plastic (ASA, MABS) front (optics) PMMA ambient conditions operating temperature -10 ... +50 °C protection class IP 67 1 www.baumer.com 17/6/2015 Photoelectric sensors OPDK 14 (Laser, standard version) Retro-reflective sensors order reference connection types OPDK 14P5901 cable 4 pin, 2 m OPDK 14P5901/S14 connector M12 4 pin OPDK 14P5901/S35A connector M8 4 pin 2 www.baumer.com 17/6/2015