Micro-D Plastic Shell - .050" Contact Spacing Microminiature Rectangular Connectors with MICRO-Pin Contacts on .050 (1.27) centers. MICRO-D microminiature rack/panel connectors are used in applications requiring highly reliable, extremely small, lightweight connectors. These connectors are available in 2 insulator materials, 2 mounting variations, 7 shell sizes accommodating from 9 to 51 contacts and a special arrangement of 5 micro contacts and 2 coaxials. The insulator materials listed give the MICRO-D connector wide versatility in most applications required by industry. MD** ITT can also terminate a wide variety of stranded or solid wire directly to MICRO-D contacts, which is often desirable in high density arrangements. • Glass-filled diallyl phthalate thermoset material used in high temperature applications that is immune to cleaning solvents. It also has excellent dielectric properties. Temperature range: -65˚F to +300˚F (-55˚C to +149˚C). MICRO-D connectors can also be custom harnessed to meet any customer requirement of single or multiple connectors. Pigtail lead and harness description must be given by the customer. A typical description would be: .5" #25 AWG, gold plated copper leads or 18" of #26 yellow, Teflon-insulated, Type E wire. Shown below are various methods of termination. Consult customer service for any routine or complex harnessing of MICRO-D connectors. • Glass-filled polyester thermoplastic that is not affected by cleaning solvents and exhibits excellent dielectric properties. Temperature range: -55˚F to +257˚F (-65˚C to +125˚C). Specifications MATERIALS AND FINISHES ELECTRICAL DATA Shell/Insulator (One Piece) MD/MDB: Glass-filled thermoset plastic MDV/MDVB: Thermoplastic No of Contacts - 9 to 51: (1 arrangement of 5 contacts and 2 coaxials - for screw mount only) Coaxial Cable Wire Size - RG-178/U (Not available for MD clip mount) - #24 thru #32 AWG Contact Termination - Multi-indent crimp Contacts - Copper alloy, gold plate MECHANICAL FEATURES Size or Length Coupling Polarization Contact Spacing Centers - 7 sizes - Friction/jackscrews - Keystone-shaped shells -.050 (1.27mm) Shell Styles - Plug and receptacle Consult factory for availabilty. How to Order R PCB ordering information - page 30 MD** 1- 9 P H 001 P RoHS COMPLIANCE SERIES-INSULATOR STYLE-MATERIAL CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODE LOCKING HARDWARE SERIES-INSULATOR STYLE-MATERIAL MDB - Screw mounting-Diallyl phthalate MDVB - Screw mounting-Polyester CONTACT SPACING 1 - .050 (1.27) centers CONTACT ARRANGEMENT 9-15-21-25-31-37-51. See page 9 CONTACT TYPE P - Pin S - Socket TERMINATION TYPE H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. TERMINATION CODE See page 79 and 81 for additional codes (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. LOCKING HARDWARE (SCREW MOUNTING ONLY) P - Jackpost K - Jackscrew-standard L - Jackscrew-low profile F - Float mount M - Military specification hardware, see page 13. No designator - No hardware - standard mounting .091 (2.31) hole diameter Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 28 Micro-D Plastic Shell - .050" Contact Spacing MDB/MDVB Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Harness Type (H) Solid Uninsulated Type (L) #26 AWG per MIL-W-16878 Type E Teflon, stranded. Length All Yellow 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) * Cavity #1 black H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042 #25 AWG Gold Plated Copper Color Coded* Termination Code H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L16 L10 Length .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) With Screw Mounting Holes (Conforms to MIL-DTL-83513) MDB Glass-filled Diallyl Phthalate Plastic Insulator MDVB Glass-filled Polyester Plastic Insulator B .110 (2.79) MAX. .204 (5.18) MAX. .304 (7.72) MAX. .395 (10.03) MAX. D TWO MTG. HOLES .091 ± .003 (2.31 ± 0.08) F .100 (2.54) MAX. C R Solder Pot B .185 (4.70) MAX. .200 (5.08) MAX. + + A .154 (3.91) MAX. .285 (7.24) MAX. .375 (9.92) MAX. F D + C .100 (2.54) MAX. .200 (5.08) MAX. + A Solder Pot Part Number by Shell Size MDB1-9P** MDVB1-9P** MDB1-9S** MDVB1-9S** MDB1-15P** MDVB1-15p** MDB1-15S** MDVB1-15S** MDB1-21P** MDVB1-21P** MDB1-21S** MDVB1-21S** MDB1-25P** MDVB1-25P** MDB1-25S** MDVB1-25S** MDB1-31P** MDVB1-31P** MDB1-31S** MDVB1-31S** MDB1-37P** MDVB1-37P** MDB1-37S** MDVB1-37S** MDB1-51P** MDVB1-51P** MDB1-51S** MDVB1-51S** A Max. .788 (20.02) .788 (20.02) .938 (23.82) .938 (23.82) 1.088 (27.64) 1.088 (27.64) 1.188 (30.18) 1.188 (30.18) 1.338 (33.98) 1.338 (33.98) 1.488 (37.80) 1.488 (37.80) 1.438 (36.52) 1.438 (36.52) B Max. .292 (7.42) .380 (9.65) .442 (11.23) .530 (13.46) .592 (15.04) .680 (17.27) .692 (17.58) .780 (19.81) .842 (21.39) .930 (23.62) .992 (25.20) 1.080 (27.43) .942 (23.93) 1.030 (26.16) E C Max. .408 (10.36) .408 (10.36) .588 (14.17) .588 (14.17) .708 (17.98) .708 (17.98) .808 (20.56) .808 (20.56) .958 (24.33) .958 (24.33) 1.108 (28.14) 1.108 (28.14) 1.058 (26.87) 1.058 (26.87) ** Add lead type and length, see Part Number Explanation. *** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 29 D Max. E Max. .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .220 (5.59) .220 (5.59) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .260 (6.60) .260 (6.60) F ±.005 .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (38.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) Avg. Weight*** ±5% (oz.) ±5% (gm.) .026 (0.73) .025 (0.70) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .080 (2.30) .073 (2.10) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.64) E Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB connectors use standard MD*B all plastic shells and are designed for use with flex circuitry, printed circuit and multi-layer boards. They are easily mounted and soldered and provide high density/high reliability in board-to-board and board-to-cable applications. While being similar to the MDM-PCB connectors, the MD*B-PCB connectors are all plastic, extremely small, and lightweight yet rugged enough for use in the most demanding applications. MD*B-PCB Jackpost mounting for use with locking hardware is also available. If the connectors shown in the catalog do not meet the requirements of your applications, a special shape, size or layout using the basic all plastic shell can be made available. For further technical and applications information, contact customer service. MD*B-PCB connectors are available in seven shell sizes with 9 to 51 contacts in the popular 90° narrow profile PCB termination, with a variety of tail lengths for varying board thickness. How to Order R MD*B - 37 S CBR * L39 - *** RoHS COMPLIANCE SERIES CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE HARDWARE TERMINATION TAIL LENGTH MODIFICATION CODES (Consult Factory) C CONNECTOR SERIES M MDVB, MDB CONNECTOR ARRANGEMENT 9, 15, 21, 25, 31, 51 C CONTACT TYPE S = Socket P = Pin T TERMINATION TYPE CBR = 90° Narrow Profile PCB Terminations H HARDWARE P = Jackpost M7 = Jackposts, M635135-07 No Letter = Less Hardware TERMINATION TAIL LENGTH CODES NONE – .109 (2.77) ± 0.15 (0.38) Standard L61 – .125 (3.18) L66 – .150 (3.81) L57 – .190 (4.83) – .250 (6.35) L39 L58 – .375 (9.52) T Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 30 Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB CBR Series (90˚ Mounting Narrow Profile) LAST CAV JACKPOST 2-56 UNC-2B TYP. A C .109 + _ .015 _ 0.38) (3.77 + + E + D CAV. #1 B H G F .186 (4.72) PLUG .199 (5.05) RECEPTACLE * * FOR 31: 1.085 (27.56) MAX. FOR 37: 1.185 (30.10) MAX. F G FOR 51: 1.225 (31.12) MAX. H _ .005 .096 + (2.44 + _ 0.31) DIA. TYP 9-15-21-25 VIEW PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.) Indentification number shown for plug connector, use reverse order for socket connector. .083 (2.11) .108 (2.73) .100 (2.54) TYP. 7 5 4 2 1 8 15 9 8 3 7 5 6 14 4 12 13 2 3 11 1 10 9 Contacts .083 (2.11) 10 .050 (1.27) TYP. 6 8 9 11 21 9 .020 (0.51) 6 .083 (2.11) .020 (0.51) 20 7 19 5 4 17 18 3 16 2 1 14 15 13 13 24 25 12 10 11 12 .020 (0.51) 8 9 22 5 7 21 20 23 17 19 2 3 4 6 18 1 15 16 14 .020 (0.51) 25 Contacts 21 Contacts 15 Contacts 15 17 .158 (4.00) 15 16 13 14 30 11 12 29 9 10 27 25 8 24 18 6 7 23 4 5 21 .183 (4.65) 2 3 19 1 19 17 17 18 .020 (0.51) 31 28 26 22 20 18 37 .020 (0.51) 31 Contacts 16 35 36 34 15 13 14 33 32 12 31 35 11 10 29 30 7 9 5 3 1 16 34 51 50 8 28 6 26 27 25 4 24 23 13 14 33 32 49 27 11 12 31 30 48 28 47 8 43 45 44 6 7 9 10 29 46 42 26 40 4 5 25 41 2 3 1 23 24 39 38 21 19 22 37 .050 (1.27) 20 36 2 22 .108 (2.73) 20 21 51 Contacts 37 Contacts All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27) Part Number By Shell Size MD*B-9PCBR* MD*B-9SCBR* MD*B-15PCBR* MD*B-15SCBR* MD*B-21PCBR* MD*B-21SCBR* MD*B-25PCBR* MD*B-25SCBR* MD*B-31PCBR* MD*B-31SCBR* MD*B-37PCBR* MD*B-37SCBR MD*B-51PCBR* MD*B-51SCBR A Max. .788 (20.01) .788 (20.01) .938 (23.82) .938 (23.82) 1.088 (27.63) 1.088 (27.63) 1.188 (30.17) 1.188 (30.17) 1.338 (33.98) 1.338 (33.98) 1.488 (37.79) 1.488 (37.79) 1.438 (36.52) 1.438 (36.52) B ± .005 (0.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) C Max. .292 (7.42) .375 (9.52) .442 (11.23) .525 (13.34) .592 (15.04) .675 (17.14) .692 (17.58) .775 (19.68) .842 (21.39) .925 (23.50) .994 (25.25) 1.075 (27.30) .942 (23.93) 1.026 (26.06) D Max. .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .258 (6.55) .258 (6.55) E Max. .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .177 (4.50) .258 (6.55) F Max. .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .520 (13.21) .520 (13.21) .550 (13.97) .550 (13.97) * For jackpost locking add letter "P" or "M7". NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 31 G ± .010 (0.25) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) H ± .010 (0.25) .230 (5.84) .230 (5.84) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81) Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial MDB Coaxial Series with Screw Mounting Holes MDB connectors with two coaxial and five MICROPINTM /MICROSOCKETTM contacts. Crimp-type coaxial contacts accommodate RG-178/U cables. A plastic insertion/extraction tool is supplied with each connector assembly having removable coaxial assembly. How to Order - MDB Coaxial R MDB 1 -7 C2 * S H ** * K RoHS COMPLIANCE SERIES SIGNAL CONTACT SPACING TOTAL CONTACT CAVITIES NUMBER OF COAXIALS COAXIAL TYPE SIGNAL CONTACT TYPE SIGNAL CONTACT LEAD TYPE SIGNAL CONTACT LEAD LENGTH MODIFICATION HARDWARE SERIES Micro-D Coaxial SIGNAL CONTACT SPACING 1 - .050 (1.27) centers TOTAL CONTACT CAVITIES . . . . . . . . . . . . . . . . . . .7 COAXIAL TYPE No Letter - Coaxial assembly installed and nonremovable RO - coaxial assembly ordered serparately RA - Coaxial shipped assembled but uninstalled NUMBER OF COAXIALS. . . . . . . . . . . . . . . . . . . . . 2 SIGNAL CONTACT TYPE P - Pin S - Socket SIGNAL CONTACT LEAD TYPE L - Uninsulated, solid wire H - Insulated, solid or stranded S -Solder pot* SIGNAL CONTACT LEAD LENGTH See Standard Wire Termination Code on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be same as wire modification. MODIFICATION Consult customer service HARDWARE No letter - No hardware standard mounting. 091 (2.31) hole diameter F - Float K - Jackscrew (standard) L - Jackscrew (low profile) P - Jackpost * Not available with removalbe coax cable type connectors RO and RA. How to Order - Coaxial Cable Assemblies R MD CC S * *** RoHS COMPLIANCE SERIES COAXIAL CABLE CONTACT TYPE COAXIAL CABLE TYPE SERIES MD COAXIAL CABLE CC COAXIAL CABLE LENGTH CONTACT TYPE P - Pin (used with socket side connection) S - Socket (used with pin type connection) COAXIAL CABLE LENGTH See Standard Wire Termination Codes on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be the same as wire modfication. COAXIAL CABLE TYPE 1 - RG178/U Dimensions shown in inch (mm) www.ittcannon.com 32 Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial Dimension - MDB Coaxial Series (See page 9 for layouts) A TWO MTG. HOLES Plug .190 (4.83) Max. B .091 +_ .003 (2.31 +_ 0.08) DIA. C E + + E1 .250 (6.35) MAX. EXTENSION FOR RO AND RA COAXES D 1.000 (25.40) MAX. Receptacle .625 (15.88) MAX. A TWO MTG. HOLES .190 (4.83) Max. B .091 +_ .003 (2.31 +_ 0.08) DIA. C E + + E1 .250 (6.35) MAX. EXTENSION FOR RO AND RA COAXES D 1.000 (25.40) MAX. D E C B A Part Number _ .005 (0.13) + Max. Max. Max. Max. by Shell Size MDB1-7C2P* .204 (5.18) .298 (7.57) .782 (19.86) .395 (10.03) .510 (12.95) MDB1-7C2S* .185 (4.70) .279 (7.09) .782 (19.86) .375 (9.52) .602 (15.29) * Add lead type and length, see Part Number Explanation. ** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 33 .625 (15.88) MAX. E1 Max. .510 (12.95) .540 (13.72) Avg. Weight** _ 5% (gm.) + _ 5% (oz) + .290 (8.30) .273 (7.80) Micro-D Plastic Shell - .050" Contact Spacing MD Mounting Hardware Views (Sizes 9-51) This hardware supplied unassembled. LOCK SCREW RETAINING CLIP MATING FACE .408 (10.36) MAX. .182 (4.62) MAX. .688 (17.48) MAX. #2-56 UNC-2B .185 (4.70) MAX. CONNECTOR SHOWN FOR REF. ONLY PANEL REF. BUSHING Screw Lock Assembly .500 (12.7) MAX. .232 (5.89) MAX. .093 (2.36) RECOMMENDED PANEL THICKNESS #2-56 UNC-2A Jackpost - (P) .052 Screw Lock Assembly* .096 ± .005 (2.44 ± 0.13)DIA. (1.32) TYP. .170 (4.32) MAX. .178 ± .005 (4.52 ± 0.13) #2-56 UNC-2B THD .260 (6.60) MAX. 90˚ Angle Mounting Bracket B A 90˚ Angle Mounting Bracket *NOTE: Torque value is 4.0 in/lbs max. Description Screw Lock Assembly Jackpost Kit Mounting Bracket, 90˚ AngleMD*1 for 9 thru 37 Shell Sizes A ± .005 (0.13) B Max. 015-9516-000 .100 (2.54) .215 (5.46) 015-9516-000 .122 (3.10) .257 (6.53) Part Number 322-9500-000 320-9505-000 MD*1 for 51 Shell Size NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit (320-9505-000) consists of 2 assemblies, shipped unassembled. This hardware is factory installed. MATING FACE .014 + _ .004 (0.36 + _ 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .185 (4.70) MAX .150 + _ .003 CONNECTOR SHOWN FOR REF ONLY CONNECTOR SHOWN FOR REF. ONLY HEX HEAD .050 (1.27) ACROSS FLATS .050 (1.27) DEEP (REF) .490 (12.45) MAX (3.81 + _ .076) .155 (3.94) MAX. .093 (2.36) REF. .090 + _ .0015 (2.29 + _ 0.038)DIA Float Mount - (F) .031 + _ .003 (0.79 + _ 0.08) MATING FACE #2-56 UNC-2A PART HAS A .040 (1.02) MAX AXIAL FLOAT Jackscrew - (K) Standard Shown here is a cutaway view of the float mount for the MD connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. MATING FACE PART HAS A .040 (1.02) MAX. AXIAL FLOAT #2-56 UNC-2A Jackscrew - (L) Low Profile * NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in/lbs Standard Jackscrew (K)-2.5 in/lbs Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 34 Micro-D Plastic Shell - .050" Contact Spacing MD Mounting Hardware to Military Specification (Sizes 9 - 51) PER MIL-DTL-83513/5 This hardware supplied unassembled. PLUG (REF. WITH .092 (2.34) DIA. MOUNTING HOLES #2-56 UNC-2A THREAD TYP. #2-56 UNC-2A THREAD TYP. PLUG (REF.) WITH .092 (2.34) DIA. MOUNTING HOLES .125 (3.18) HEX #2-56 UNC-2B Thread .190 (4.83) +_ .185 (4.70) .010 (0.25) TH'K (REF.) .361 (9.17) MAX. .010 (0.25) TH'K (REF.) .062 (1.57) HEX. (REF.) .475 (12.06) ± 0.25 (0.64) .062 (1.57) ± .010 (0.25) POTTING WELL (REF.) POTTING WELL (REF.) Jackscrew - (L) Low profile * LOCK WASHER RETAINING NUT .154 (3.91) HEX. Allen head Optional Head Configuration Plug and Receptacle Jackscrew - (K) High Profile Low and High Profile Slotted Head Description # 2-56 UNC-2A Thread Jackpost Assembly M83513/5 Slotted Head Jackscrew Assy Low Profile Slotted Head Jackscrew Assy High Profile Allen Head Jackscrew Assy Low Profile Allen Head Jackscrew Assy High Profile Jackpost Assy Mode Code -05 -06 -02 -03 -07 Part Number M5 M6 M2 M3 M7 320-9508-025 320-9508-027 320-9508-026 320-9508-028 320-9505-033 Jackpost Bushing (For Rear Panel Mounting) HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS .170 (4.32) .185 (4.70) #2-56 UNC 2B THD + .005 (0.13) - .000 (0.00) R TYP. .075 (1.91) MATING FACE C A .126 (3.20) .125 (3.18) DIA.TYP. A + B + .500 (12.7) .480 (12.19) 27˚/26˚TYP #2-56 UNC 2A THD Panel Thickness A Dim. Jackpost Kit Number* 3/32 (2.4) .092/.087 (2.34/2.21) 320-9505-007 1/16 (1.6) .061/.056 (2.34/1.42) 320-9505-006 3/64 (1.2) .047/.042 (1.19/1.07) 320-9505-005 1/32 (0.8) .030/.025 (0.76/0.64) 320-9505-004 *2 Jackposts, 2 nuts, 2 washers. NOTE: Torque value for jackpost 2.5 in/lbs Plug and Receptacle Dimensions Shell Size A +.004 (0.10) -.000 (0.00) B C +.004 (0.10) + _.005 (0.13) -.000 (0.00) 9 .379 ( 9.63) .219 (5.56) .565 (14.35) 15 .529 (13.44) .219 (5.56) .715 (18.16) 21 .679 (17.25) .219 (5.56) .865 (21.97) 25 .779 (19.79) .219 (5.56) .965 (24.51) 31 .929 (23.60) .219 (5.56) 1.115 (28.32) 37 1.079 (27.41) .219 (5.56) 1.265 (32.13) 51 1.029 (26.14) .261 (6.63) 1.215 (30.86) Panel Mounting Dimensions .300 ±.005 (7.62 ±0.13) .200 ±.005 (5.08 ±0.13) .395 ±.005 (10.03 ±0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 35 Plug Front Mounted Receptacle Rear Mounted Micro-D Plastic Shell - .050" Contact Spacing MD Panel Cutouts D TYP. C B FULL R. (TYP.) .015 (0.38)R. MAX.(TYP) A Figure 1 Front Mounting C .075 (1.91) A D + .005 (0.13) R TYP - .000 (0.00) B FULL R. (TYP.) 26˚/27˚TYP Figure 2 Rear Mounting C .450 ±.002 (11.43 ±0.05) .030 (0.76) TYP. D + + + + FULL R. (TYP.) PANEL REF. Figure 3 Edgeboard Mounting Size 9 15 21 25 31 37 51 Cutout Figure A + .004 (0.10) - .000 (0.00) B + .004 (0.10) - .000 (0.00) C + .005 (0.13) - .000 (0.00) D + .005 (0.13) - .000 (0.00) 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 .409 (10.39) .379 ( 9.63) .559 (14.20) .529 (13.44) .709 (18.00) .679 (17.25) .809 (20.55) .779 (19.79) .959 (24.36) .929 (23.60) 1.109 (28.17) 1.079 (27.41) 1.059 (26.90) 1.029 (26.14) - .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .215 (5.46) .261 (6.63) - .570 (14.48) .570 (14.48) .570 (14.48) .720 (18.29) .720 (18.29) .720 (18.29) .870 (22.10) .870 (22.10) .870 (22.10) .970 (24.64) .970 (24.64) .970 (24.64) 1.120 (28.45) 1.120 (28.45) 1.120 (28.45) 1.270 (32.26) 1.270 (32.26) 1.270 (32.26) 1.220 (30.99) 1.220 (30.99) 1.220 (30.99) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) NOTES: 1. Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws. 2. Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page. 3. Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 ± .002 (11.43 ± 0.05) locates the MD receptacle flush with the end of the board. www.ittcannon.com 36 Micro-D Plastic Shell - .050" Contact Spacing MD/MDV How to Order MD R PCB ordering information - page 30 1- 9 P H 001 P RoHS COMPLIANCE SERIES-INSULATOR STYLE-MATERIAL CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODE LOCKING HARDWARE SERIES-INSULATOR STYLE-MATERIAL MD - Clip mounting -Diallyl phthalate MDV - Clip mounting-Polyester CONTACT ARRANGEMENT 9-15-21-25-31*-37-51. See page 7 CONTACT TYPE S - Socket P - Pin CONTACT SPACING 1 - .050 (1.27) centers TERMINATION TYPE H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. TERMINATION CODE** (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. No designator - No hardware - standard mounting .091 (2.31) hole diameter * Not available in clip mounting. ** See page 79 and 81for additional codes. With Clip Mounting Slots Plug MD Glass-filled Diallyl Phthalate Plastic Insulator MDV Glass-filled Polyester Plastic Insulator B .130 (3.30) MAX. .022 (0.56) MAX. E .093 ± .005 (2.36 ± 0.13) D .375 (9.52) MAX. .170 (4.32) A .065 (1.65) MAX. .204 (5.18) MAX. C Solder Pot Receptacle B .170 (4.32) MAX. .022 (0.56) MAX. E .093 ± .005 (2.36 ± 0.13) A D .065 (1.65) MAX. .185 (4.69) MAX. .356 (9.04) MAX. .210 (5.33) C Solder Pot Part Number by Shell Size MD1-9P** MD1-9S** MD1-15P** MD1-15S** MD1-21P** MD1-21S** MD1-25P** MD1-25S** MD1-37P** MD1-37S** MD1-51P** MD1-51S** MDV1-9-P** MDV1-9S** MDV1-15P** MDV1-15S** MDV1-21P** MDV1-21S** MDV1-25P** MDV1-25S** MDV1-37P** MDV1-37S** MDV1-51P** MDV1-51S** A Max. .512 (13.00) .512 (13.00) .662 (16.81) .662 (16.81) .812 (20.62) .812 (20.62) .912 (23.16) .912 (23.16) 1.212 (30.78) 1.212 (30.78) 1.162 (29.51) 1.162 (29.51) ** Add lead type and length, see Part Number Explanation. B Max. .292 (7.42) .376 (9.55) .442 (11.23) .526 (13.36) .592 (15.04) .676 (17.17) .692 (17.58) .776 (19.71) .992 (25.20) 1.076 (27.33) .942 (23.93) 1.026 (26.06) C Max. .405 (10.29) .405 (10.29) .555 (14.10) .555 (14.10) .705 (17.91) .705 (17.91) .805 (20.45) .805 (20.45) 1.105 (28.07) 1.105 (28.07) 1.055 (26.80) 1.055 (26.80) D Max. .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .213 (5.41) .213 (5.41) E Max. .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .258 (6.55) .258 (6.55) *** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 37 Avg. Weight*** ±5% (oz.)/±5% (gm.) .026 (0.73) .026 (0.73) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.65) Micro-D Plastic Shell - .050" Contact Spacing MD** Panel Mounting Hardware Clip Mounting Illustrated is the recommended method of front mounting with metal panel mounting keys. Panel mounting keys are available with or without coupling retention clips. For front mounting, place the rear of the connector thru the panel cutout. With the mounting flange against the panel, fully insert the panel mounting keys thru the slots in the flange and thru the panel cutout. Retaining the keys in this position, bend them outward against the rear of the panel. When mating a front mounted connector with an unmounted connector, a coupling retention clip assembly may be used to securely lock the two together. Mounting screw brackets are available and may be used instead of the panel mounting keys. Description Coupling Retention Clip (see Figure 2) Mounting Screw Brackets (see Figures 1 and 3) Edgeboard Mounted (see Figure 4) Panel Mounting Key Part Number Panel Mounting Key 201-9100-000 Mounting Key and Coupling Clip Assembly 294-9100-000 Mounting Screw Bracket 015-9100-000 015-5009-000 * Edgeboard Mounting Bracket ** Edgeboard Mounting Bracket and MD51428-1 Coupling Clip Assembly * Must be ordered separately; specify left and right hand for complete assembly. ** Must be ordered separately; assembly contains set of left and right hand types. Dimensions (Clip Mounting Only) .330 ± .005 (8.38 ± 0.13) .200 ± .005 (5.08 ± 0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted .265 ± .005 (6.73 ± 0.13) Plug Front Mounted Receptacle Rear Mounted Panel Cutouts C D A B A FULL R. (TYP.) B .015 (0.38)R. MAX. (TYP.) .015 (0.38)R. MAX. (TYP.) Figure 1 Figure 2 Front Mounting D C A .075 + .005 - .000 (1.91 + 0.13 _ 0.00) B FULL R. (TYP.) 26˚/27˚ TYP. Figure 3 Rear Mounting .018 + .002 - .000 (0.46 + 0.05 - 0.00) A .005 (0.13) MAX. R. (TYP.) B .182 + .004 - .000 (4.62 + 0.10 - 0.00) PANEL REF. Figure 4 Edgeboard Mounting 1. A panel thickness of 1/8" (3.17mm) maximum is recommended for ease of tab bending when a panel mounting key & clip assembly or edgeboard mounting brackets are used. 2. Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for dimensions. 3. Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002 (2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board. 4. Screw brackets (015-9100-000) will accommodate #2-56 screws. 5. Front mounting (Figure 1) and rear mounting (Figure 3) accommodate #2-56 screws. A B Shell Cutout + .004 (0.10) + .004 (0.10) Size Figure - .000 (0.00) - .000 (0.00) 1 .408 (10.36) .172 (4.37) 2 .408 (10.36) .172 (4.37) 9 3 .378 ( 9.60) .217 (5.51) 4 .400 (10.16) .091 (2.31) 1 .588 (14.94) .172 (4.37) 2 .588 (14.94) .172 (4.37) 15 3 .528 (13.28) .217 (5.51) 4 .550 (13.97) .091 (2.31) 1 .738 (18.75) .172 (4.37) 2 .738 (18.75) .172 (4.37) 21 3 .678 (17.27) .217 (5.51) 4 .700 (17.78) .091 (2.31) 1 .838 (21.29) .172 (4.37) 2 .838 (21.29) .172 (4.37) 25 3 .778 (19.76) .217 (5.51) 4 .800 (20.32) .091 (2.31) 1 1.138 (28.91) .172 (4.37) 2 1.138 (28.91) .172 (4.37) 37 3 1.078 (27.38) .217 (5.51) 4 1.100 (27.94) .091 (2.31) 1 1.088 (27.64) .215 (5.46) 2 1.088 (27.64) .215 (5.46) 51 3 1.028 (26.11) .260 (6.60) 4 1.050 (26.67) .091 (2.31) C D + .004 (0.10) + .005 (0.13) - .000 (0.00) - .000 (0.00) .650 (16.51) .089 (2.26) .650 (16.51) .089 (2.26) .795 (20.19) .089 (2.26) .795 (20.19) .089 (2.26) .945 (24.00) .089 (2.26) .945 (24.00) .089 (2.26) 1.045 (26.54) .089 (2.26) 1.045 (26.54) .089 (2.26) 1.345 (34.16) .089 (2.26) 1.345 (34.16) .089 (2.26) 1.295 (32.89) .089 (2.26) 1.295 (32.89) .089 (2.26) - Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 38