ITT KPT00B10

KPT/KPSE
CONNECTORS
KP-6/898
KPT/KPSE
Miniature circular connectors
Contents
Introduction
Introduction............................................................. 2
Standard Data........................................................ 3
Series KPT............................................................. 4
Series KPSE........................................................... 6
Contact arrangements............................................ 9
The miniature circular connectors series KPT and
KPSE from ITT Cannon are manufactured acc. to
MIL-C-26482 with three point bayonet coupling and
five-keyway polarization.They offer general purpose
solder connectors and high performance crimp
connectors. The broad product range provides the
most complete familiy of connectors conform to MILC-26482, NFC 93422 HE 301 model, VG 95328 and
LN 29500 specifications.
Wall mounting receptacles....................................13
Cable connecting plugs...........................................14
Box mounting receptacles......................................15
Thru-bulkhead receptacles....................................15
Straight plugs.......................................................16
Jam nut receptacles.............................................17
Right angle plugs.................................................18
Special versions
Connectors with grounding continuity.................19
Receptacles with straight solder pins................. 22
Panel cutouts........................................................ 24
Dummy receptacle.............................................. 25
Protective caps..................................................... 26
Tools ..................................................................... 27
Assembly instructions ........................................ 28
Cross reference lists ........................................... 29
Product safety information................................... 31
2
The versatility of these connectors has been proven
by their usage in general as well as in high performance environmental applications.
In addition to the basic series presented in this
catalogue, connectors for special applications are
available. They include corrosion resistant types,
filter connectors for electromagnetic compatability
and non-outgasing, radiation resistant versions.
All connectors conform to the above mentioned
specifications are fully intermateable and accept a
wide range of interchangeable accessories. Thereby
design modifications can be achieved more easily
and at lower cost with connectors of the KPT/KPSE
series.
Subject to changes
KPT/KPSE
Miniature circular connectors
Technical Data
KPT
KPSE
Material and Finishes
Shell
Insulator
Grommet and Seal
Contacts
Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416
Polychloroprene
Polychloroprene
Polychloroprene
Polychloroprene
Copper alloy, gold plated
Copper alloy, gold plated
Mechanical Data
Shell styles
06 – Straight plug
Shell sizes
Polarisation/Coupling
Service classes
E – Grommet seal
Water tightness
Operating temperature
Durability
Vibration
00 – Wall mounting receptacle
01 – Cable connecting plug
02 – Box mounting receptacle
07 – Jam nut receptacle
08 – Plug with 90° termination assemblies
B – Thru-bulkhead receptacle (KPT only)
8 thru 24
five keyways/three point bayonet
A – General duty
B – General duty with strain relief
E – Grommet seal
F – Grommet seal with strain relief
G – Gland seal for jacketed cable
J – Gland nut with strain relief for jacketed cable
P – for potting
see also pages 5 and 8
Acc. to VG 95319 Part 2, Test No. 5.9.2
For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only
Test pressure 0,2 bar overpressure
Test duration 48 h
Test temperature 25 ± 3°C
The connector shall be free of moisture
– 55 / 125°C
min. 500 mating cycles
200 m/s2 at 10 to 2000 Hz
Electrical Data
Number of contacts
Wire size AWG
Contact termination
2 thru 61
16 thru 24
Solder
Contact rating
Size AWG
20
16
⊕ 5000 MW
Rated current A
7,5
22,0
Test current A
7,5
13,0
Test voltage
Sea level
Service class
1
2
1
2
Vrms
1500
2300
375
550
Insulation resistance
Service rating
Exception
Service rating between the
central contact and the housing
of the coaxial contact
21336 m
(70 000 ft.)
Operating voltage
Service class
1
2
Operating voltage and connector usage
3
3 thru 61
12 thru 24
Crimp
Millivolt drop mV
less than 55
less than 50
VDC
2100
3200
535
770
VG 95328
140 VDC/100 VAC
165 VDC/115 VAC
With scoop proof connectors
operating voltages
acc. to MIL-C-26482 and
VG 96912 are
permitted
MIL-C-26482
850 VDC/600 VAC
1400 VDC/1000 VAC
Connectors are equipment which must not be separated or mated when used as per determination. As acc. to
specification the connectors are suitable for an operating voltage of 50 V (see Product Safety Information).
However, this is only valid when the connectors are free accessible during operation and consequently might
be touchable. When the connectors will be operated with line voltage, ITT Cannon offers a solution, too. Please
consult factory.
KPT/KPSE
Miniature circular connectors
KPT General purpose solder contact connectors
● General purpose
● Solder termination
● Closed entry socket contacts
Series KPT from ITT Cannon offers general purpose
connectors, qualified for use in military applications
but also widely used in industrial applications calling
for a circular connector with fixed contacts for solder
termination.
The KPT series is MIL-C-26482 approved and is
intermateable with all connectors acc. to the above
mentioned specifications.
4
Subject to changes
KPT/KPSE
Miniature circular connectors
KPT General purpose solder contact connectors
How to order*
KPT 02 E 22 - 36 P W
Series Prefix
KPT – ITT Cannon Prefix
Shell style
ITT Cannon designation
00 – wall mounting receptacle
01 – cable connecting plug
02 – box mounting receptacle (class E only), not with
contact arrangement 14A4
06 – straight plug
07 – jam nut receptacle (hermetic version also available)
08 – 90° angle plug
B – thru-bulkhead receptacle (class E only)
Class
A – general duty with intermediate endbell
B – general duty with strain relief
(may be used for potting)
E – with a grommet seal, not for 02 and 3112 (MS Spec)
F – grommet seal with strain relief (MS Spec)
G – gland seal for jacketed cable
J – watertight gland seal with strain relief
for jacketed cable
P – for potting (MS Spec)
Shell sizes
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see page 9 – 11
Contact type
P – pin
S – socket
Alternate insert position
W, X, Y and Z (omit for normal)
see page 12
Modification code
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ – Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell style
indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the ITT Cannon
ordering system. For other order references according to a specification, please
consult the cross reference list on pages 29 – 30.
5
*
KPT/KPSE
Miniature circular connectors
KPSE High performance crimp contact connectors
● High performance
● Crimp termination
● Closed entry socket contacts
Series KPSE environmental, miniature circular, quick
disconnect connectors are designed for the exacting
requirements of today`s electronic industry.
They are intermateable, intermountable and
interchangeable with all connectors manufactured
acc. to MIL-C-26482, LN 29500, VG 95328, NFC
93422 HE 301 and NFL 54125.
Connectors of ITT Cannon series KPSE have
obtained the VDE Expertise No. 63761.
1 Standard MIL-C-26482 or NFL 54 125 Hardware
mates with any connector designed to MIL-C-26 482,
LN 29500 or NF L 54 125 or NF C 93 422, HE 301
model
2 Crimp, snap-in contacts
are designed to MIL-C-23216 and can be crimped with
the standard M22520/1 crimp tool.
4 Contact retaining clip
is completely encased in a tough plastic wafer to protect
the clip from damage.
Complete moisture sealing
is achieved by combining four seals: shell, peripheral,
interfacial and wire seals.
CLOSED-ENTRY SOCKET CONTACTS
eliminate damage from abuse by test probes and help
to correct any misaligned pins during engagement.
SHELL SEAL
is effected when the plug shell pushes against the
sealing ring in the receptacle when the connectors are
mated.
CONTACT INSERTION
is accomplished from the rear of the connector. When
the contact is fully inserted, the clip tines snap securely
behind the contact shoulder.
PERIPHERAL SEAL
around the edge of the pin insulator is designed so that
mating the connector puts tension on the seal and
greatly reduces compression set.
CONTACT EXTRACTION
is accomplished with a front-inserted extraction tool.
Pressing the tool plunger pushes the contact out
through the rear of the connector.
INTERFACIAL SEAL
is achieved by the insulator faces meeting when the
plug and receptacle are mated.
3 Monobloc insulator
does not leave any access to moisture and avoids
interfacial empty space.
WIRE SEAL
is accomplished by a multiple ripple design, exceeding
the wire sealing requirements of MIL-C-26482.
5 Positive insert-to-shell mechanical retention
with hard plastic wafer firmly locked into a groove in
the shell, in addition to a strong adhesive bond between
the insert and shell.
6
Subject to changes
KPT/KPSE
Miniature circular connectors
KPSE High performance crimp contact connectors
How to order acc. to VG 95328
VG 95328 A 18 - 1 S N
Specification
Shell style
A – wall mouting receptacle with straight endbell
B – wall mounting receptacle with cable clamp
C – box mounting receptacle
D – jam nut receptacle
E – jam nut receptacle with cable clamp
J – straight plug with adapter DN
K – straight plug with cable clamp
M – straight plug, version DZ
N – straight plug
R – wall mounting receptacle, version DZ
S – jam nut receptacle with adapter DN
T – jam nut receptacle, version DZ
Shell size
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see pages 9 – 11
Contact type
P – pin
S – socket
Alternate insert position
see page 12
7
KPT/KPSE
Miniature circular connectors
KPSE High performance crimp contact connectors
How to order
KPSE 00 E 18 - 32 P X *
Series prefix
KPSE – ITT Cannon prefix
MS – MIL-C-26482 prefix
Shell style
ITT Cannon designation
00 – wall mounting receptacle
01 – cable connecting plug
02 – box mounting receptacle
06 – straight plug
07 – jam nut receptacle
08 – 90° angle plug
Class
A – general duty (not MS approved)
B – general duty with strain relief (not MS approved)
E – grommet seal (MS specification)
F – grommet seal with strain relief (MS specification)
G – gland seal for jacketed cable
J – gland seal with strain relief for jacketed cable
(not MS approved)
P – for potting (MS specification)
Shell style
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see pages 9 – 11
Contact type
P – pin
S – socket
Alternate insert position
W, X, Y and Z (omit for normal), see page 12
Modification code
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ – Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell style
indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the ITT Cannon
ordering system. For other order references according to a specification, please
consult the cross reference list on pages 29 – 30.
8
Subject to changes
KPT/KPSE
Miniature circular connectors
Contact Arrangements
No. of
contacts
Contact
arrangement
Contact size
AWG
Service
rating
2
8-2 䉱䉭
20
1
58
122
-
-
3
8-3 䉱䉭
20
1
60
210
-
-
3
8-3A 䉭䊉䉫䉲
20
1
60
-
-
-
3
8-33 䉱䉫䉭
16S
1
90
-
-
-
4
8-4 䉱䉭
16S
1
45
-
-
-
6
10-6 䊉䉭䉫䉲
20
1
90
-
-
-
3
12-3 䉱䊉䉫䉭䉲
16
2
-
-
180
-
10
12-10 䉱䊉䉫䉭䉲
20
1
60
155
270
295
5
14-5 䉱䉭
16
2
40
92
184
273
12
14-12 䉱䉭
20 (8)
16 (4)
1
43
90
-
-
Y
Z
Insulator weight (g)
including contacts
pin
Legende
䉱 KPT 䉫 KPSE
9
Insulator position
W
X
䉲 LN29500 䉭 authorized per MIL-C-26482 䊉 authorized per VG95328
socket
KPT/KPSE
Miniature circular connectors
Contact Arrangements
No. of
contacts
Contact
arrangement
Contact size
AWG
Service
rating
15
14-15 䉱䊉䉫䉭䉲
20
1
17
110
155
124
19
14-19 䉱䊉䉫䉭䉲
20
1
30
165
315
-
5
14-22 䊉
12 (1)
20 (4)
1
-
-
-
-
4
14A4 䉱
Coax RG188U
1
-
-
-
-
8
16-8 䉱䊉䉫䉭
16
2
54
152
180
331
23
16-23 䉱䊉䉫
20 (22)
16 (1)
1
158
270
-
-
26
16-26 䉱䊉䉫䉭
20
1
60
-
275
338
11
18-11 䉱䊉䉫䉭䉲
16
2
62
119
241
340
32
18-32 䉱䊉䉫䉭䉲
20
1
85
138
222
265
Y
Z
Insulator weight (g)
including contacts
pin
Legende
䉱 KPT 䉫 KPSE
10
Insulator position
W
X
socket
䉲 LN29500 䉭 authorized per MIL-C-26482 䊉 authorized per VG95328
Subject to changes
KPT/KPSE
Miniature circular connectors
Contact Arrangements
No. of
contacts
Contact
arrangement
Contact size
AWG
Service
rating
16
20-16 䉱䊉䉫䉭䉲
16
2
238
318
333
347
5
20A6 䉫
12
2
90
180
270
-
24
20-24 䉱
20
1
70
145
215
290
39
20-39 䉱䊉䉫䉭
20 (37)
16 (2)
1
63
114
252
333
41
20-41 䉱䊉䉫䉭䉲
20
1
45
126
225
-
21
22-21 䉱䊉䉫䉭
16
2
16
135
175
349
36
22-36 䉱䊉
20
1
72
144
216
288
41
22-41 䉱䊉䉫䉭䉲
20 (27)
16 (14)
1
39
135
264
-
22-55 䉱䊉䉫䉭䉲
20
1
30
142
226
314
55
Y
Z
Insulator weight (g)
including contacts
pin
2
Legende
䉱 KPT 䉫 KPSE
11
Insulator position
W
X
䉲 LN29500 䉭 authorized per MIL-C-26482 䊉 authorized per VG95328
socket
KPT/KPSE
Miniature circular connectors
Contact arrangements
No. of
contacts
61
Contact
arrangement
Contact size
AWG
Service
rating
24-61 䉱䊉䉫䉭
20
1
Alternate Insert Position
The diagram indicates alternate insert positions. The
six positions N, V, W, Y, Z differ in degree of rotation
for various sizes and arrangements. For the exact
degree of rotation, for the list of contact arrangements and for alternate positions available, refer to
the table at the right.
Insulator position
W
X
90
180
Nbr. of
contacts
Contact
arr.
V
8
2
3
3
3
8-4
6
3
10
4
5
5
12
15
19
8
23
26
11
32
5
16
24
39
41
21
36
41
55
61
8-2
8-3
8-3A
8-33
10-6
12-3
12-10
14A4
14-22
14-22
14-5
14-15
14-19
16-8
16-23
16-26
18-11
18-32
20A6*
20-16
20-24
20-39
20-41
22-21
22-36
22-41
22-55
24-61
45
-
14
16
18
20
22
24
Insulator weight (g)
including contacts
Z
pin
Shell
size
4
10
12
Y
socket
270
324
Degree of rotation
W
X
Y
Z
-
--
180
270
184
155
315
180
275
241
222
270
333
215
252
225
175
216
264
226
270
-295
273
234
331
338
340
265
347
290
333
349
288
314
324
58
60
60
90
90
60
40
43
17
30
54
158
60
62
85
90
238
70
63
45
16
72
39
30
90
122
210
155
92
90
110
165
52
270
119
138
180
318
145
114
126
135
144
135
142
180
* This contact arrangement features five contacts size 12. Four are standard contacts and one is a first-to-mate contact.
12
Subject to changes
KPT/KPSE
Miniature circular connectors
Wall mounting receptacles
KPT00/MS3110 KPSE00/MS3120
Solder
KPT00/MS3110
Crimp
KPSE00/MS3120
Without termination assembly
Shell
size*
◆8
10
12
14
16
18
20
22
24
KPT/KPSE
ØA
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
L
max.
21,6
21,6
21,6
21,6
21,6
21,6
26,8
26,8
26,8
Q
Thread Type 2A
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1- 1/16-18UNEF
1- 3/16-18UNEF
1- 5/16-18UNEF
1- 7/16-18UNEF
K
±0,25
13,5
13,5
13,5
13,5
13,5
13,5
16,5
16,5
17,3
M
±0,15
11,6
11,6
11,6
11,6
11,6
11,6
14,25
14,25
15,1
R
±0,15
15,1
18,3
20,6
23,0
24,6
27,0
29,4
31,8
34,9
S
max.
21,0
24,2
26,6
29,0
31,3
33,7
36,9
40,1
43,3
KPT
Z
max.
12,3
12,3
12,3
12,3
12,3
12,3
10,8
10,8
10,0
T
±0,15
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,75
With termination assemblies
Type A
Shell
size*
◆8
10
12
14
16
18
20
22
24
Typ A
BA
max.
15,0
18,2
21,2
24,6
27,7
30,9
33,9
37,1
40,3
Shell
size*
◆8
10
12
14
16
18
20
22
24
Type E
BE
max.
14,2
17,2
20,4
23,4
26,6
29,6
32,8
36,0
39,2
DA
min.
8,5
11,8
15,0
17,9
21,1
24,1
26,5
30,4
32,8
LE
max.
32,5
32,5
32,5
32,5
32,5
32,5
34,5
34,5
34,5
* See page 5, 7 and 8 for ordering number information
13
LA
max.
38,0
38,0
38,0
38,0
38,0
38,0
43,1
43,1
43,1
Type B or F
V
Thread Type 2A
1/2-28UNEF
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1 -20UNEF
1-3/16-18UNEF
1-3/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
Type P
BP
max.
15,3
17,6
21,6
24,3
27,6
31,0
34,3
37,1
40,5
◆ in
DP
min.
8,3
11,3
14,2
17,3
20,5
23,1
26,3
29,4
32,6
Type E
Typ B and F
BBF
max.
14,0
17,2
20,4
23,6
26,7
29,5
32,7
35,9
39,0
LP
max.
36,9
36,9
36,9
36,9
36,9
36,9
42,2
42,2
43,9
C
Thread
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
Type P
DBF
min.
6,0
7,5
10,7
13,9
15,5
19,6
19,6
23,6
25,2
Mod. DN or F 185
D2
-0,5
15,6
18,4
23,7
24,5
29,8
32,0
36,1
38,5
41,6
series KPSE only contact arrangements 8-3A and 8-33 available
GBF
min.
2,9
4,5
7,7
9,3
12,4
15,6
15,6
18,8
20,1
L1
max.
35,0
35,0
35,0
35,0
37,0
37,0
42,0
42,0
42,0
Mod. DN or F 185
HBF
max.
19,3
20,8
24,4
27,2
28,7
35,3
35,3
39,9
43,2
L2
±0,5
12,2
12,2
12,2
12,2
14,5
14,5
15,8
15,8
14,9
LBF
max.
45,1
45,1
45,1
45,1
48,2
48,2
50,0
50,0
50,0
KPT/KPSE
Miniature circular connectors
Cable connecting plugs
KPT01/MS3111 KPSE01/MS3121
Solder
KPT01/MS3111
Crimp
KPSE01/MS3121
Without termination assembly
Shell
size*
◆8
10
12
14
16
18
20
22
24
KPT/KPSE
ØA
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
K
±0,25
13,5
13,5
13,5
13,5
13,5
13,5
16,5
16,5
17,5
L
max.
21,5
21,5
21,5
21,5
21,5
21,5
26,8
26,8
26,8
M
±0,15
11,6
11,6
11,6
11,6
11,6
11,6
14,25
14,25
15,1
Q
Thread Type 2A
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1- 1/16-18UNEF
1- 3/16-18UNEF
1- 5/16-18UNEF
1- 7/16-18UNEF
S
max.
18,5
23,0
29,0
29,5
32,0
35,0
38,5
42,0
46,0
KPT
Z
max.
12,3
12,3
12,3
12,3
12,3
12,3
10,8
10,8
10,0
ØY
max.
21,0
24,2
26,6
29,0
31,3
33,7
36,9
40,1
43,3
With termination assemblies
Type A
Shell
size*
◆8
10
12
14
16
18
20
22
24
Typ A
BA
max.
15,0
18,2
21,2
24,6
27,7
30,9
33,9
37,1
40,3
Shell
size*
◆8
10
12
14
16
18
20
22
24
Type E
BE
max.
14,2
17,2
20,4
23,4
26,6
29,6
32,8
36,0
39,2
DA
min.
8,5
11,8
15,0
17,9
21,1
24,1
26,5
30,4
32,8
LE
max.
32,5
32,5
32,5
32,5
32,5
32,5
34,5
34,5
34,5
* See page 5, 7 and 8 for ordering number information
14
LA
max.
38,0
38,0
38,0
38,0
38,0
38,0
43,1
43,1
43,1
Type B or F
V
Thread Type 2A
1/2-28UNEF
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1 -20UNEF
1-3/16-18UNEF
1-3/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
Type P
BP
max.
15,3
17,6
21,6
24,3
27,6
31,0
34,3
37,1
40,5
◆in
DP
min.
8,3
11,3
14,2
17,3
20,5
23,1
26,3
29,4
32,6
Type B and F
BBF
max.
14,0
17,2
20,4
23,6
26,7
29,5
32,7
35,9
39,0
LP
max.
36,9
36,9
36,9
36,9
36,9
36,9
42,2
42,2
43,9
Type E
C
Thread
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
Type P
DBF
min.
6,0
7,5
10,7
13,9
15,5
19,6
19,6
23,6
25,2
Mod. DN or F 185
D2
-0,5
15,6
18,4
23,7
24,5
29,8
32,0
36,1
38,5
41,6
GBF
min.
2,9
4,5
7,7
9,3
12,4
15,6
15,6
18,8
20,1
L1
max.
35,0
35,0
35,0
35,0
37,0
37,0
42,0
42,0
42,0
Mod. DN or F 185
HBF
max.
19,3
20,8
24,4
27,2
28,7
35,3
35,3
39,9
43,2
LBF
max.
46,0
46,0
46,0
46,0
49,0
49,0
51,1
51,1
51,1
L2
±0,5
12,2
12,2
12,2
12,2
14,5
14,5
15,8
15,8
14,9
series KPSE only contact arrangements 8-3A and 8-33 available
Subject to changes
KPT/KPSE
Miniature circular connectors
Box mounting receptacles
KPT02/MS3112 KPSE02/MS3122
Solder
KPT02/MS3112
Crimp
KPSE02/MS3122
Without termination assemblies
Shell
size*
◆8
10
12
14
16
18
20
22
24
KPT/KPSE
ØA
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
L
max.
21,1
21,1
21,1
21,1
21,1
21,1
22,7
22,7
22,7
* See page 5, 7 and 8 for ordering number information
N
max.
11,1
14,3
17,5
20,6
23,8
27,0
30,2
33,4
36,5
◆in
K
±0,25
13,5
13,5
13,5
13,5
13,5
13,5
16,5
16,5
17,3
M
±0,15
11,6
11,6
11,6
11,6
11,6
11,6
14,25
14,25
15,1
R
±0,15
15,1
18,3
20,6
23,0
24,6
27,0
29,4
31,8
34,9
S
max.
21,0
24,2
26,6
29,0
31,3
33,7
36,9
40,1
43,3
T
±0,15
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,75
KPT
Z
max.
12,3
12,3
12,3
12,3
12,3
12,3
10,8
10,8
10,0
series KPSE only contact arrangements 8-3A and 8-33 available
Thru-bulkhead receptacles
KPTB/MS3119
KPTB/MS3119
Receptacle assembly
Shell
size*
◆8
10
12
14
16
18
20
22
24
ØA
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
K
±0,5
16,1
16,1
16,1
16,1
16,1
16,1
20,1
20,1
20,1
* See page 5, 7 and 8 for ordering number information
15
L
max.
28,6
28,6
28,6
28,6
28,6
28,6
31,9
31,9
31,9
◆in
M
±0,25
14,5
14,5
14,5
14,5
14,5
14,5
17,7
17,7
17,7
T
max.
6,0
6,0
6,0
6,0
6,0
6,0
9,2
9,2
8,0
series KPSE only contact arrangements 8-3A and 8-33 available
R
±0,15
15,1
18,3
20,6
23,0
24,6
27,0
29,4
31,8
34,9
S
max.
21,0
24,2
26,6
29,0
31,3
33,7
36,9
40,1
43,3
X
±0,15
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,75
KPT/KPSE
Miniature circular connectors
Straight plugs
KPT06/MS3116 KPSE06/MS3126
Solder
KPT06/MS3116
Crimp
KPSE06/MS3126
Without termination assemblies
KPT/KPSE
G
max.
19,8
23,6
26,5
30,1
33,2
35,4
39,0
42,1
45,2
Shell
size*
◆8
10
12
14
16
18
20
22
24
JL
±0,15
9,1
9,1
9,1
9,1
9,1
9,1
10,7
10,7
10,7
KPT
Z
Thread Type 2A
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1- 1/16-18UNEF
1- 3/16-18UNEF
1- 5/16-18UNEF
1- 7/16-18UNEF
Q Thread
max.
21,4
21,4
21,4
21,4
21,4
21,4
25,1
25,1
25,1
max.
16,3
16,3
16,3
16,3
16,3
16,3
15,0
15,0
15,0
With termination assemblies
Type A
Shell
size*
◆8
10
12
14
16
18
20
22
24
Shell
size*
◆8
10
12
14
16
18
20
22
24
Type A
BA
max.
15,0
18,2
21,2
24,6
27,7
30,9
33,9
37,1
40,3
Type E
BE
max.
14,2
17,2
20,4
23,4
26,6
29,6
32,8
36,0
39,2
DA
min.
8,5
11,8
15,0
17,9
21,1
24,1
26,5
30,4
32,8
LE
max.
32,5
32,5
32,5
32,5
32,5
32,5
34,5
34,5
34,5
* See page 5, 7 and 8 for ordering number information
16
LA
max.
42,0
42,0
42,0
42,0
42,0
42,0
45,0
45,0
45,0
Type B or F
V
Thread Type 2A
1/2-28UNEF
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1 -20UNEF
1-3/16-18UNEF
1-3/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
Type P
BP
max.
15,3
17,6
21,6
24,3
27,6
31,0
34,3
37,1
40,5
◆in
DP
min.
8,3
11,3
14,2
17,3
20,5
23,1
26,3
29,4
32,6
Type E
Typ B and F
BBF
max.
14,0
17,2
20,4
23,6
26,7
29,5
32,7
35,9
39,0
LP
max.
36,9
36,9
36,9
36,9
36,9
36,9
42,2
42,2
43,9
C
Thread
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
DBF
min.
6,0
7,5
10,7
13,9
15,5
19,6
19,6
23,6
25,2
Mod. DN or F 185
D2
-0,5
15,6
18,4
23,7
24,5
29,8
32,0
36,1
38,5
41,6
Type P
GBF
min.
2,9
4,5
7,7
9,3
12,4
15,6
15,6
18,8
20,1
L1
max.
35,0
35,0
35,0
35,0
37,0
37,0
42,0
42,0
42,0
Mod. DN or F 185
HBF
max.
19,3
20,8
24,4
27,2
28,7
35,3
35,3
39,9
43,2
LBF
max.
46,0
46,0
46,0
46,0
49,0
49,0
49,0
49,0
49,0
L2
±0,5
12,2
12,2
12,2
12,2
14,5
14,5
15,8
15,8
14,9
series KPSE only contact arrangements 8-3A and 8-33 available
Subject to changes
KPT/KPSE
Miniature circular connectors
Jam nut receptacle
KPT07/MS3114 KPSE07/MS3124
Solder
KPT07/MS3114 Type A
Crimp
KPSE07/MS3124
Without termination assemblies
Shell
size*
◆8
10
12
14
16
18
20
22
24
KPT/KPSE
A
+0,03 -0,13
12,0
15,0
19,05
22,23
25,40
28,58
31,75
34,93
38,10
F
±0,15
13,3
16,5
20,6
23,8
26,9
30,1
33,3
36,5
39,6
H
±0,15
19,0
22,2
27,0
30,2
33,3
36,5
39,7
42,9
46,0
* See page 5, 7 and 8 for ordering number information
K
±0,25
3,2
3,2
3,2
3,2
3,2
3,2
4,0
4,0
4,0
◆in
M
±0,15
17,7
17,7
17,7
17,7
17,7
17,7
22,5
22,5
23,3
R
Thread Type 2A
9/16-24UNEF
11/16-24UNEF
7/8-20UNEF
1 -20UNEF
1- 1/8-18UNEF
1- 1/4-18UNEF
1- 3/8-18UNEF
1- 1/2-18UNEF
1- 5/8-18UNEF
S
±0,5
24,0
27,0
32,0
35,0
38,5
41,5
46,0
49,5
52,5
T Panel thickness
min.
max.
1,6
3,5
1,6
3,5
1,6
3,5
1,6
3,5
1,6
3,5
1,6
3,5
1,6
6,5
1,6
6,5
1,6
6,5
KPT
ØY
max.
28,0
31,0
36,0
39,0
42,0
45,0
50,0
55,0
57,0
Z
max.
7,9
7,9
7,9
7,9
7,9
7,9
4,7
4,7
3,8
series KPSE only contact arrangements 8-3A and 8-33 available
With termination assemblies
Type B or F
Shell
size*
◆8
10
12
14
16
18
20
22
24
Type B and F
BBF
max.
18,2
21,5
24,6
27,8
31,0
34,1
38,1
41,3
44,5
DBF
min.
6,0
7,5
10,7
13,9
15,5
19,6
19,6
23,6
25,2
GBF
min.
2,9
4,5
7,7
9,3
12,4
15,6
15,6
18,8
20,1
* See page 5, 7 and 8 for ordering number information
17
HBF
max.
19,3
20,8
24,2
27,2
28,7
35,3
35,3
39,8
43,2
◆in
Type E
Type E
LBF
max.
44,9
44,9
44,9
44,9
48,4
48,4
50,3
50,3
50,3
BE
max.
18,2
21,5
24,6
27,8
31,0
34,1
38,1
41,3
44,5
Type DN
LE
max.
33,5
33,5
33,5
33,5
33,5
33,5
39,0
39,0
39,0
series KPSE only contact arrangements 8-3A and 8-33 available
Modification
DN or F 185
L1
max.
43,0
43,0
43,0
43,0
45,5
45,5
52,6
52,6
51,6
L2
±0,5
12,2
12,2
12,2
12,2
14,5
14,5
15,8
15,8
14,9
D2
max.
15,6
18,4
23,7
24,7
29,8
32,0
36,1
28,5
41,6
KPT/KPSE
Miniature circular connectors
Right angle plug, 90°
KPT08 KPSE08
Solder
KPT08
Crimp
KPSE08
Without termination assemblies
Shell
size*
◆8
10
12
14
16
18
20
22
24
KPT/KPSE
G
max.
19,8
23,6
26,5
30,1
33,2
35,4
39,0
42,1
45,2
J
±0,15
9,1
9,1
9,1
9,1
9,1
9,1
10,7
10,7
10,7
* See page 5, 7 and 8 for ordering number information
◆in
L
max.
21,4
21,4
21,4
21,4
21,4
21,4
25,1
25,1
25,1
KPT
Z
max.
16,3
16,3
16,3
16,3
16,3
16,3
15,0
15,0
15,0
Q
Thread Type 2A
7/16-28UNEF
9/16-24UNEF
11/16-24UNEF
13/16-20UNEF
15/16-20UNEF
1- 1/16-18UNEF
1- 3/16-18UNEF
1- 5/16-18UNEF
1- 7/16-18UNEF
series KPSE only contact arrangements 8-3A and 8-33 available
With termination assemblies
Typ A or E
Shell
size*
◆8
10
12
14
16
18
20
22
24
Typ A and E
BAE
max.
15,6
18,9
21,2
24,8
27,7
31,4
34,7
36,9
41,1
LAE
max.
36,1
38,3
40,9
41,6
42,5
44,7
48,3
52,1
52,1
* See page 5, 7 and 8 for ordering number information
18
DAE
max.
20,9
21,7
23,3
24,9
26,5
28,1
29,6
31,7
33,6
◆in
Type B or F
V
Thread Type 2A
1/2-28UNEF
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1 -20UNEF
1-3/16-18UNEF
1-3/16-18UNEF
1-7/16-18UNEF
1-7/16-18UNEF
Type B and F
BBF
max.
15,6
18,9
21,2
24,8
27,7
31,4
34,7
36,9
41,1
DBF
max.
31,4
32,2
35,4
38,6
40,2
41,8
43,4
47,9
49,9
LBF
max.
36,1
38,3
40,9
41,6
42,5
44,7
48,3
52,1
52,1
series KPSE only contact arrangements 8-3A and 8-33 available
Subject to changes
KPT/KPSE
Miniature circular connectors
Special versions with grounding continuity
These connectors are designed to ensure electrical
continuity
● at the cable shielding level
(to protect it against radio frequency
intererences)
● at the grounding level
(if it is connected to the shielding).
The plugs are manufactured with grounding fingers
soldered to the front face of the shell. They make
contact with the inner side of the receptacle shell.
Plug and receptacle feature a special endbell which
supports the cable shielding. The connectors are in
accordance with the VG 95328 specification.
Receptacle with grounding continuity (for shielded cable)
KPT/KPSE 0E ... DZ
Shell
size*
◆8
10
12
14
16
18
20
22
24
A
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
B
min.
6,6
9,2
12,2
15,2
18,3
20,0
23,0
26,0
28,8
C
+0,5
16,0
18,0
22,0
25,0
28,0
32,0
34,0
38,0
41,0
* See pages 5 and 8 for ordering number information
19
D
max.
13,3
16,1
20,0
22,2
26,2
28,5
32,5
34,8
37,9
◆in
E
1,00
15,0
15,0
17,0
18,0
18,0
18,0
18,0
18,0
18,0
K
±0,25
13,5
13,5
13,5
13,5
13,5
13,5
16,5
16,5
17,3
L
max.
52,0
52,0
52,0
53,0
53,0
53,0
58,0
58,0
58,0
M
±0,15
11,6
11,6
11,6
11,6
11,6
11,6
14,25
14,25
15,1
series KPSE only contact arrangements 8-3A and 8-33 available
R
±0,15
15,1
18,3
20,6
23,0
24,6
27,0
29,4
31,7
34,9
S
max.
21,0
24,2
26,6
29,0
31,3
33,7
36,9
40,1
43,3
ØT
±0,15
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,75
KPT/KPSE
Miniature circular connectors
Cable connecting plug with grounding continuity (for shielding cable)
KPT/KPSE 1E ... DZ
Shell
size*
◆8
10
12
14
16
18
20
22
24
A
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
B
min.
6,6
9,2
12,2
15,2
18,3
20,0
23,0
26,0
28,8
C
+0,50
16,0
18,0
22,0
25,0
28,0
32,0
34,0
38,0
41,0
* See pages 5 and 8 for ordering number information
D
max.
13,3
16,1
20,0
22,2
26,2
28,5
32,5
34,8
37,9
◆in
E
±1,0
15,0
15,0
17,0
18,0
18,0
18,0
18,0
18,0
18,0
K
±0,25
13,5
13,5
13,5
13,5
13,5
13,5
16,5
16,5
17,5
L
max.
52,0
52,0
52,0
53,0
53,0
53,0
58,0
58,0
58,0
M
±0,15
11,6
11,6
11,6
11,6
11,6
11,6
14,25
14,25
15,10
S
max.
18,5
23,0
29,0
29,5
32,0
35,0
38,5
42,0
46,0
ØY
max.
21,0
24,2
26,6
29,0
31,3
33,7
36,9
40,1
43,3
series KPSE only contact arrangements 8-3A and 8-33 available
Straight plug with grounding continuity
KPT/KPSE6E.DZ
Shell
size*
◆8
10
12
14
16
18
20
22
24
A
min.
6,6
9,2
12,2
15,2
18,3
20,0
23,0
26,0
28,8
B
+0,50
16,0
18,0
22,0
25,0
28,0
32,0
34,0
38,0
41,0
* See pages 5 and 8 for ordering number information
20
C
max.
19,1
22,0
26,2
29,4
32,8
35,4
39,0
42,1
45,2
◆in
D
max.
20,0
15,0
26,0
30,0
33,0
36,0
40,0
43,0
46,0
E
±1,0
15,0
15,0
17,0
18,0
18,0
18,0
18,0
18,0
18,0
L
max.
48,0
48,0
48,0
49,0
49,0
49,0
53,0
53,0
53,0
S
±0,2
17,0
19,0
23,0
26,0
29,0
33,0
35,0
39,0
42,0
series KPSE only contact arrangements 8-3A and 8-33 available
Subject to changes
KPT/KPSE
Miniature circular connectors
Jam nut receptacle with grounding continuity (for shielded cable)
KPT/KPSE 7E ... DZ
Shellsize
◆8
10
12
14
16
18
20
22
24
ØA
min.
6,6
9,2
12,2
15,2
18,3
20,0
23,0
26,0
28,8
ØB
+0,5
16,0
18,0
22,0
25,0
28,0
32,0
34,0
38,0
41,0
* See pages 5 and 8 for ordering number information
ØC
max.
18,2
21,4
24,6
27,8
30,9
34,1
38,1
41,3
44,4
◆in
D
max.
13,3
16,1
20,0
22,2
26,2
28,5
32,5
34,8
37,9
E
1,0
15,0
15,0
17,0
18,0
18,0
18,0
18,0
18,0
18,0
L
max.
47,0
47,0
49,0
50,0
50,0
50,0
55,0
55,0
55,0
series KPSE only contact arrangements 8-3A and 8-33 available
Assembly of a connector with a ground continuity endbell
KPT/KPSE ... DZ
Shell
size*
◆8
10
12
14
16
18
20
22
24
±A
max.
6,6
9,2
12,2
152
18,3
20,0
23,0
26,0
28,8
±B
max.
8,0
10,0
14,0
17,0
20,0
24,0
27,0
30,0
33,0
* See pages 5 and 8 for ordering number information
21
◆in
series KPSE only contact arrangements 8-3A and 8-33 available
S
±0,25
23,0
27,0
31,7
34,9
38,1
41,3
46,0
49,2
52,3
T
±0,25
19,0
22,2
27,0
30,2
33,3
36,5
39,7
42,9
46,0
KPT/KPSE
Miniature circular connectors
Receptacles with straight solder pins
How to order
KPT 2 E 22 - 36
P W *
Series
KPT – ITT Cannon designation
Shell type
ITT Cannon designation
2 – box mounting receptacle (only class E),
not layout 14 A 4
7 – jam nut receptacle
(hermetic version also available)
Class
A – general duty (shell type 7 only)
E – with grommet seal, not for 02 and
3112 (MS-Spezification), only shell type 2
Shell size
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangements
see page 9 – 11
Contact type
P – pin
S – socket
Alternate insert position
W, X, Y and Z (omit for normal position)
see page 12
Modification
EW – solder pin 0,6 x 7 mm
EX – solder pin 0,76 x 7 mm
22
Subject to changes
KPT/KPSE
Miniature circular connectors
Box mounting receptacle
KPT 2* P/S** .***
Shell
size
8
10
12
14
16
18
20
22
24
A
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
K
±0,25
13,50
13,50
13,50
13,50
13,50
13,50
16,50
16,50
17,30
L
max.
21,1
21,1
21,1
21,1
21,1
21,1
22,7
22,7
22,7
M
±0,15
11,60
11,60
11,60
11,60
11,60
11,60
14,25
14,25
15,10
N
max.
11,10
14,30
17,50
20,60
23,80
27,00
30,20
33,40
36,50
R
±0,15
15,10
18,30
20,60
23,00
24,60
27,00
29,40
31,70
34,90
S
max.
21,00
24,20
26,60
29,00
31,30
33,70
36,90
40,10
43,30
ØT
±0,15
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,75
Order ref. see page 22
Jam nut receptacle
KPT 7* P/S** .***
Shell
size*
8
10
12
14
16
18
20
22
24
A
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
Order ref. see page 22
23
F
±0,15
13,3
16,5
20,6
23,8
26,9
30,1
33,3
36,5
39,6
H
±0,15
19,0
22,2
27,0
30,2
33,3
36,5
39,7
42,9
46,0
K
±0,25
3,2
3,2
3,2
3,2
3,2
3,2
4,0
4,0
4,0
M
±0,15
17,7
17,7
17,7
17,7
17,7
17,7
22,5
22,5
23,3
R
Thread Type 2 A
9/16-24UNEF
11/16-24UNEF
7/8-20UNEF
1- 20UNEF
1- 1/8-18UNEF
1- 1/4-18UNEF
1- 3/8-18UNEF
1- 1/2-18UNEF
1- 5/8-18UNEF
S
±0,5
24,0
27,0
32,0
35,0
38,5
41,5
46,0
49,5
52,5
Panel thickness
min.
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
Y
max.
28,0
31,0
36,0
39,0
42,0
45,0
50,0
55,0
57,0
KPT/KPSE
Panel cutouts
Miniature circular connectors
Box and wall mounting receptacle
Shell size
8
10
12
14
16
18
20
22
24
for rear mounting
D +0,25 / -0
14
17
22
25
28
31
34,5
37,5
41
for front mounting
D +0,25 / -0
12,7
16
19
22,2
25,5
28,5
31,7
35
38
KPT/KPSE
T +0,3
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,1
3,6
P - Panel thickness
screw head height included
2,2
2,2
2,2
2,2
2,2
2,2
5,4
5,4
5,4
R ±0,15
15,1
18,3
20,6
23,0
24,6
27,0
29,4
31,8
34,9
Mounting hole diameter
Shell size
8
10
12
14
16
18
20
22
24
front mounting
rear mounting
Jam nut receptacle
Shell
size
8
10
12
14
16
18
20
22
24
24
KPT/KPSE
A +0,25
-0
14,5
17,7
22,7
25,7
28,8
32
35,1
38,4
41,5
B +0
-0,12
13,6
16,8
20,9
24,1
27,2
30,4
33,6
36,8
40
Subject to changes
KPT/KPSE
Dummy receptacles
Miniature circular connectors
How to order
KPT
MS
15 3115 -
8
10
A
A
Series
Dummy receptacle
Shell size
Flange
A-Standard
Shell size
*8A
* 10 A
* 12 A
* 14 A
* 16 A
* 18 A
* 20 A
* 22 A
* 24 A
A
+0,03 -0,13
12,00
15,00
19,05
22,23
25,40
28,58
31,75
34,93
38,10
K
±0,4
1,6
1,6
1,6
1,6
1,6
1,6
2,4
2,4
2,4
* Add KPT 15 or MS 3115 prefixes
25
M
±0,15
12,1
12,1
12,1
12,1
12,1
12,1
14,5
14,5
15,4
R
±0,15
15,1
18,3
20,6
23,0
24,6
27,0
29,4
31,8
34,9
S
max.
21,0
24,2
26,6
29,0
31,3
33,7
36,9
40,1
43,3
ØT
±0,15
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,05
3,75
KPT/KPSE
Miniature circular connectors
Protective caps
80 / 3180 – for plugs
cap with nylon cord D / preferred type
Material and finishes
Protective cap
Sash chain
Cord
Ring
Clip
Gasket
Endlink / rivet
Bayonet pin
Finishes
A34
A66
Aluminum alloy
Stainless steel
Polyamide
Stainless steel
Aluminum alloy
Fluor Silicone
Stainless steel, passivated
Stainless steel, passivated
Nickel
Olive drab chromate over cadmium
How to order
KPT80 - 10 D - A34
MS3180 - 10
Series
KPT80 – for plug
KPT81 – for receptacle
81 / 3181 – for receptacles
cap with nylon cord D / preferred type
Shell size
8 – 24
Termination
D – Preferred type: with nylon cord and end link
clip and end link attached
C – sash chain
N – sash chain with ring (81 or 3181 only)
Modification
A34 – nickel plated
without code = A66 – oliv drab chromate over cadmium
VG95328 - Z2 C 10
VG Specification
Shell
Style
Z1 – for receptacle
Z2 – for plug
8
10
12
14
16
18
20
22
24
Termination
C – with nylon cord and end link
clip and end link attached
Shell size
8 – 24
A
size
18,26
21,44
25,40
28,58
31,75
34,92
38,10
41,28
44,45
L1
max
19,84
19,84
19,84
19,84
19,84
19,84
21,44
21,44
22,22
B
max.
18,0
20,3
25,1
28,2
31.5
34,5
37,8
40,9
44,2
L2
max.
21,44
21,44
21,44
21,44
21,44
21,44
21,44
21,44
22,22
H
max.
76
76
89
89
89
89
101
101
101
N
14,7
17,9
22,6
25,8
29,0
32,2
35,3
38,5
41,7
Crimp tool for clips upon request
80 / 3180 – for plugs
cap with sash chain C or N
26
81 / 3181 – for receptacles
cap with sash chain C or N
Subject to changes
KPT/KPSE
Miniature circular connectors
Tools and Accessories
Crimp tools
Insertion/Extraction tool
Series
Hand crimp tool
KPSE
M22520/1-01
Locator for contact
sizes 20, 16 and 12
M22520/1-02
Test gage for
Hand crimp tool
M22520/3-1
KPSE
Contact size
20 without insulation support
20 with insulation support
16
12
Insertion tool
MS
MS24256A20
MS24256A16
MS24256A12
ITT Cannon
CIT-20-18
CIT-20-5A
CIT-16-1
Extraction tool
MS/ITT Cannon
MS24256R20
MS24256R20
MS24256R16
MS24256R12
LN
W0,6LN29500
W0,6LN29500
W1,2LN29500
KPT14A4
Contact type
Coaxial
Contacts
Insertion tool
-
Extraction tool
CET-C 6 B
KPSE/VG 95328
Contact size
Contact type
20
Socket with
insulation support
Pin with
insulation support
Socket
Pin
Socket
Pin
Grounding pin
PIn
Socket
DM 53740-5001
DM 53742-5001
16
12
Contact order ref.
KPSE version
031-8704-203
VG 95328 version
031-8704-203
430-8560-006
430-8560-006
031-8704-000
430-8560-004
031-8704-012
430-8560-016
430-8560-020
031-8704-000
430-8560-004
KPT14A4
Coaxial
Wire hole fillers/Grommet sealing plugs
KPSE
Contact size
20
16
12
Koax 14A4
Flange gaskets
MS
MS3187A20
MS3187-16A
MS3187-12
LN
BL0,6LN 29500
BL1,2LN 29500
ITT Cannon
225-1012-000
225-1011-000
225-0072-000
225-0018-000
KPSE
Shell
size
8
10
12
14
16
27
Colour code
Red
Blue
Yellow
Yellow
Alu-Flex
conductive
075-8543-000
075-8543-001
075-8543-002
075-8543-003
075-8543-004
Chloroprene
non conductive
075-8543-010
075-8543-011
075-8543-012
075-8543-013
075-8543-014
Shell
size
18
20
22
24
Alu-Flex
conductive
075-8543-005
075-8543-006
075-8543-007
075-8543-008
Chloroprene
non conductive
075-8543-015
075-8543-016
075-8543-017
075-8543-018
KPT/KPSE
Contact
size
20
16
12
14A4 Coax
Cable size
mm2 (AWG)
0,93-0,21 (20-24)
1,91-0,60 (16-20)
3,18-1,91 (12-14)
RG179B/u
Assembly
Miniature
circularInstructions
connectors
Strip
insulation
5,0 mm
6,5 mm
6,5 mm
Crimping contacts
1. Strip wires according to the table above taking care
not to cut or nick strands.
2. Insert stripped wire into contact crimp pot. Wire must
be visible thru inspection hole.
3. Using correct crimp tool and locator, cycle the tool
once to be sure the indentors are open. Insert contact
and wire into locator. Squeeze tool handles firmly and
completely to insure a proper crimp. The tool will not
release unless the crimp indentors in the tool head
have been fully actuated.
4. Release crimped contact and wire from tool. Be
certain the wire is visible thru inspection hole in contact.
Contact insertion
5. Remove hardware from plug and receptacle. Slide
hardware over wire bundle in proper order for reassembly.
6. Use the proper contact insertion tool, and slide the
tool over the terminal end of the contact. The size 16
contact lies in the tool and the tool tip butts against the
contact shoulder. The rear, or insulation support, of the
size 20 contact butts against an internal shoulder in
the tool tip.
7. Beginning from center cavity and working outwards,
insert wired contacts into rear of connector by hand
until the front of the contact shoulder is no more than
1/8" from the grommet. Holding the connector securely,
position tool behind contact. Push tool straight into
contact cavity until contact snaps into position. A light
pull on wire will assure that contact is locked securely.
Repeat for remaining contacts.
8. Use wire hole fillers or grommet sealing plugs to fill
any empty cavities and assemble hardware to rear of
plug or receptacle.
Completion
9. Check face of plug or receptacle for proper contact
installation.
11. Use the proper extraction tool. There are two lines
on the clip sleeve which are vital to the contact removal process. The first index line is used for removing
pin contacts while the second index line is for removing
socket contacts. Carefully place the tool tip over the
contact to be extracted until the tool tip touches the
insulator face. Carefully rotate the tool until the index
line is slightly below the insulator face. Keep an even
pressure against tool body; push plunger forward with
thumb and index finger; and push the contact out
through the clip. Carefully remove extraction tool from
connector. Pull the wire by hand to complete the removal of the contact.
Contact extraction
10. Slide hardware back over wire bundle. Using proper extraction tool or extraction end of proper insertion/
extraction tool, proceed as follows:
Please ask for our detailed
Assembly Instruction
28
Subject to changes
KPT/KPSE
Miniature circular connectors
Cross Reference List KPT/MIL-C-26482, NFL 54125, VG 95328
Part No. KPT
ITT Cannon
KPT00B*-***
KPT00B*-***
KPT00E*-***
KPT00F*-***
KPT00G*-***
KPT00J*-***
KPT00P*-***
KPT0E*-***DN
KPT0E*-***DZ
KPT01A*-***
KPT01B*-***
KPT01E*-***
KPT01F*-***
KPT01G*-***
KPT01J*-***
KPT01P*-***
KPT1E*-***DN
KPT06A*-***
KPT06B*-***
KPT06E*-***
KPT06F*-***
KPT06G*-***
KPT1E*-***DZ
Part No.
MIL-26482
MS3110E*-***
MS3110E*-***
MS3110J*-***
MS3110P*-***
MS3111E*-***
MS3111F*-***
MS3111J*-***
MS3111P*-***
MS3116E*-***
MS3116F*-***
Part No.
NFL 54125
25100A*-***50
25100AC*-***50
25100E*-***50
25100EC*-***50
25100J*-***50
Part No.
VG 95328
Part No.
LN 29500
25100P*-***50
25101A*-***50
25101AC*-***50
25101E*-***50
25101EC*-***50
25101J*-***50
25101P*-***50
25106A*-***50
25106AC*-***50
25106E*-***50
25106EC*-***50
25106J*-***50
25102E*-***50Y11*
25107A*-***50Y11*
KPT06J*-***
KPT06P*-***
KPT6A*-***88
KPT6E*-***DN
KPT6E*-***DZ
KPT02E*-***
KPT07A*-***
KPT07E*-***
KPT07F*-***
KPT08E*-***
KPT08F*-***
KPT08P*-***
KPT7E*-***DN
KPTB*-***
MS3116J*-***
MS3116P*-***
MS3112E*-***
MS3114E*-***
MS3114F*-***
25106P*-***50
25102E*-***50
25107A*-***50
25107E*-***50
25107EC*-***50
H*-***VG 95328
25108EC*-***50
25108P*-***50
MS3119E*-***
251B*-***
Please note: Connectors acc. to VG 95328 and connectors of ITT Cannon series KPSE use different contacts – see page 27
Cross Reference List Protective Caps
Part No.
Part No.
ITT Cannon
KPT80
KPT80...C
KPT81
KPT81...C
KPT81...N
MIL-C-26482
MS 3180
MS 3180...C
MS 3181
MS 3181...C
MS 3181...N
29
Part No.
NFL 54125
Part No.
VG95328
Z 2...VG 95328
Z 1...VG 95328
Part No.
LN 29500
KPT/KPSE
Miniature circular connectors
Cross Reference List KPSE/MIL-C-26482, NFL 54125, VG95328
Part No. KPSE
ITT Cannon
KPSE00A*-***
KPSE00B*-***
KPSE00E*-***
KPSE00F*-***
KPSE0E*-***DZ
KPSE00J*-***
KPSE00P*-***
KPSE0E*-***DN
KPSE00G*-***
KSPE01A*-***
KPSE01B*-***
KPSE01E*-***
KPSE01F*-***
KPSE01G*-***
KPSE01J*-***
KPSE01P*-***
KPSE*-***DN
KPSE02E*-***
KPSE06A*-***
KPSE06B*-***
KPSE06E*-***
KPSE06F*-***
KPSE06G*-***
KPSE06J*-***
KPSE06P*-***
KPSE6A*-***88
KPSE6E*-***88
KPSE6E*-***DN
KPSE6E*-***DZ
KPSE07A*-***
KPSE1E*-***DZ
KPSE7E*-***DN
KPSE07E*-***
KPSE07F*-***
KPSE08E*-***
KPSE08F*-***
KPSE08P*-***
KPSE7E*-***DZ
Part No.
MIL-C-26482
Part No.
NFL 54-125
25100RA*-***50
Part No.
VG 95328
MS3120E*-***
MS3120F*-***
25100R*-***50
25100RC*-***50
A*-***VG 95328
B*-***VG 95328
R*-***VG 95328
MS3120P*-***
25100RP*-***50
25106RJ*-***50
25101RA*-***50
MS3121E*-***
MS3121F*-***
25101R*-***50
25101RC*-***50
25101RJ*-***50
MS3121P*-***
25101RP*-***50
MS3122E*-***
25102R*-***50
25106RA*-***50
MS3126E*-***
MS3126F*-***
25106R*-***
25106RC*-***50
25106RJ*-***50
MS3126P*-***
25106RP*-***50
C*-***VG 95328
K*-***VG 95328
N*-***VG 95328
J*-***VG 9532
M*-***VG 95328
25107RA*-***50
MS3124E*-***
MS3124F*-***
25107R*-***50
25107RC*-***50
S*-***VG 95328
D*-***VG 95328
E*-***VG 95328
25108RC*-***50
25108RP*-***50
T*-***VG 95328
Please note: Connectors acc. to VG 95328 and connectors of ITT Cannon series KPSE use different contacts – see page 27
30
Subject to changes
KPT/KPSE
Miniature circular connectors
Product Safety Information
THIS NOTE SHOULD BE READ IN CON-JUNCTION
WITH THE PRODUCT DATA SHEET/CATALOGUE.
FAILURE TO OB-SERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS
SPECIFIED IN THE PRODUCT DATA SHEET/
CATALOGUE COULD RESULT IN HAZAR-DUOUS
SITUATIONS.
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials. They contain conducting and
non-conducting materials and can be divided into
two groups.
a) Printed circuit types and low cost audio types
which employ all plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types
with metal casings and either natural rubber,
synthetic rubber, plastic or glass insulating
materials.
Contact materials vary with type of connector and
also application and are usually manufactured from
either copper, alloys, nickel, alumel, chromel or
steel. In special applications, other alloys may be
specified.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters.
Incorrect wiring or assembly of the connector or
careless use of metal tools or conductive fluids,
or transit damage to any of the component parts
may cause electric shock or burns. Live circuits
must be broken by separating mated connectors
as this may cause arcing, ionisation and burning.
Heat dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resistance
is raised locally by damage, e.g. cracked or
deformed contacts, broken strangs of wire. Local
overheating may also result from the use of the
incorrect application tools or from poor quality
soldering or slack screw terminals. Overheating may
occur if the ratings in the Product Data Sheet/
Catalogue are exceeded and can cause breakdown
of insulation and hence electric shock.
If heating is allowed to continue it intensifies by
further increasing the local resistance through loss
of temper of spring contacts, formation of oxide
film on contacts and wires, and leakage currents
through carbonisation of insulation and tracking
paths. Fire can then result in the presence of
combustible materials and this may release noxious
fumes. Overheating may not be visually apparent.
Burns may result from touching overheated
components.
3. HANDLING
Care must be taken to avoid damage to any
component parts of electrical connectors during
installation and use. Although there are normally
no sharp edges, care must be taken when handling
certain components to avoid injury to fingers.
31
Electrical connectors may be damaged in transit to
the customers, and damage may result in creation
of hazards. Products should therefore be examined
prior to installation/use and rejected if found to be
damaged.
Always use the correct application tools as specified
in the Data Sheet/Catalogue.
4. DISPOSAL
Incineration of certain materials may release
noxious or even oxid fumes.
For operation voltage please see appropriate national
regulations
5. APPLICATION
Connectors with exposed contacts should not be
selected for use on the current supply side of an
electrical circuit, because an electric shock could
result from touching exposed contacts on an
unmated connector. Voltages in excess of 30 V ac
or 42.5 V dc are potentially hazardous and care
should be taken to ensure that such voltages can
not be transmitted in any way to exposed metal parts
of the connector body. The connector and wiring
should be checked, before making live, to have no
damage to metal parts of insulators, no solder blobs,
loose strands, conducting lubricants, swarf, or any
other undersired conducting particles. Insulation
resistance should be checked to make certain that
no low resistance joints or spurious conducting path
are existing between contacts and exposed metal
parts of the connector body. Further the contact
resistance of the connectors should be measured
within the electrical circuit in order to identify high
resistances which result in excessive connector
heating.
Do not permit untrained personnel to wire, assemble
or tramper with connectors.
IMPORTANT GENERAL INFORMATION.
1. Air and creepage paths/Operating voltage
The admissible operating voltages depend on the
individual applications and the valid national and
other applicable safety regulations.
For this reason the air and creepage path date
are only reference values. Observe reduction of air
and creepage paths due to PC board and/or harnessing.
2. Temperature
All information given are temperature limits. The
operation temperature depends on the individual
application.
3. Other important information
Cannon continuously endeavours to improve their
products. Therefore, Cannon products may deviate
from the description, technical data and shape as
shown in this catalogue and data sheets.
4. Harnessing and Assembly Instructions
If applicable, our special harnessing and/or assembly instruction has to be adhered to. This is provided at request.
ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended
to be used in accordance with the specifications in this catalog. Any use or application that deviates from stated operating
specifications is not recommended and may be unsafe. No information and data contained in this catalog shall be construed
to create any liability on the part of ITT Cannon. Any new issue of this catalog shall automatically invalidate and supersede
any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT
Cannon under this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or
consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or
strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability,
prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders
based on development samples delivered. This catalog is not be construed as an offer. It is intended merely as an
invitation to make an offer. By this publication, ITT Cannon does not assume responsibility or any liability for any patent
infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted,
indicating the source. However, ITT Cannon's prior consent must be obtained in all cases.
Cannon is a trademark of ITT Industries, Inc