Product Overview NCP1244: Controller, Fixed Frequency, Current Mode, for Flyback Converters For complete documentation, see the data sheet Product Description The NCP1244 is a new fixed-frequency current-mode controller featuring Dynamic Self-Supply. This function greatly simplifies the design of the auxiliary supply and the Vcc capacitor by activating the internal startup current source to supply the controller during start-up, transients, latch, stand-by etc. This device contains a special HV dtector which detects the application unplug from the AC input line and triggers the X2 discharge current. It features a timer-based fault detection that ensures the detection of overload and an adjustable compensation to help keep the maximum power independent of the input voltage. Due to frequency foldback, the controller exhibits excellent efficiency in light load condition while still achieveing very low standby power consumption. Internal frequency jittering, ramp compensation, and a versatile latch input make this controller an excellent candidate for the robust power supply designs. A dedicated OFF mode allows to reach the extremely low no load input power consumption via sleeping whole device and thus minimze the power consumption of the control circuitry. This product is IEC60950 compliant. Please see the test report and certification in the Conformance report section below. Features Benefits • Frequency Foldback and Skip Mode • Timer-Based Overload Protection with Latched (Option A) or Auto-Recovery (Option B) operation • High voltage current source with Dynamic Self Supply (DSS) • Internal Frequency Jittering • Adjustable overpower protection • Dedicated latch off input • Integrated X2 capacitor discharge • Power saving off mode when used with NCP4353 or NCP4354 • Maximizes efficiency in light load and standby conditions • Protection against overcurrent or short circuit conditions • • • • Provides fast, loss-less startup Softer EMI signature Compensates peak current for changing line input voltage Simplifies protection for fault conditions like overtemperature or overvoltage • Eliminates the X2 capacitor discharge resistors and their associated parasitic consumption • Allows the power supply to achieve extremely low no load power consumption Part Electrical Specifications Product Compliance Status Topolog y Control Mode fsw Typ (kHz) StandUVLO by Mode (V) Short Circuit Protecti on Latch Soft Start VCC Max Drive (V) Cap. (mA) Packag e Type NCP1244AD065R2G Pb-free Active Flyback Current Mode 65 Yes 8.9 Yes Yes Yes 28 500 / 800 SOIC-7 Active Flyback Current Mode 100 Yes 8.9 Yes Yes Yes 28 500 / 800 SOIC-7 Active Flyback Current Mode 65 Yes 8.9 Yes Yes Yes 28 500 / 800 SOIC-7 Active Flyback Current Mode 100 Yes 8.9 Yes Yes Yes 28 500 / 800 SOIC-7 Halide free NCP1244AD100R2G Pb-free Halide free NCP1244BD065R2G Pb-free Halide free NCP1244BD100R2G Pb-free Halide free Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016