5,28 0,208 5,60 0,220 1 13,33 0,525 17,18 0,676 4,20 0,165 2,60 0,102 3,23 0,127 8 6,65 0,262 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED 5,28 0,208 0,89 0,035 3,43 0,135 1,60 0,063 15,62 0,615 MAX 4,32 0,170 2,03 0,080 1,02 0,040 3,25 0,128 8 2 7 3,43 0,135 16,26 0,640 MAX 10,67 0,420 2,54 0,100 1 2,79 0,110 4,32 0,170 10,28 0,405 0,97 0,038 TOP OF PCB LP 1,09 0,043 SEE NOTE 1 2,54 0,100 8 0,38 0,015 1 . 14,25 0,561 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 15,62 0,615 12,70 0,500 1,78 0,070 12,70 0,500 NOTE 1: PLUG SELECIVE CAPABILITY: THE SPRINGS PERVENT FROM INSERTION OF A RJ11 PLUG INTO THE JACK. COMPATIBLE WITH RJ45 PLUGS. NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP NOTE 3: RoHS COMPLIANT T e chnical sp e cif icat io ns Stand ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description Thickness of plating Asse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process Ap p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val u e T e st D ata Stan d ard ap p l i c . Val ue High Temp. Thermoplastic Me c han i c al p ro p e rti e s Phosphor Bronze Insertion/withdrawal force IEC 603-7 max. 20 N 50 µin Au over 50 µin Ni Mechanical operations IEC 512-5, 9a > 500 150 µin matte Sn over 50 µin Ni Effectiveness of connector CuZn coupling device IEC 512-8, 15f 88 N 50 µ Ni El e c tri c al p ro p e rti e s Cre e p ag e / c l e aran c e d i stan c e s a) Contact - contact IEC 807-3 1,02 mm Tray b) Contact - shell IEC 807-3 4,06 mm 265°C Vo l tag e p ro o f (D i e l e c tri c Wi th stan d Vo l tag e ) Reflow a) Contact - contact IEC 512-2, 4a min. 900 V AC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC Current carrying capacity IEC 512-3, 5b 0,2 A @ 70° C V0 Contact resistance IEC 512-2, 2a max. 50 mOhm Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En v i ro n me n tal p ro p e rti e s Operation temperature -40 to +85° C Tolerances Information: Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & F i n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Shell/shield plating Plug selective capability ±0,127 1:1 2:1 Scale All Dimensions in mm [in] Designation All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. C 07.09.2009 Index Date Subject to modification without prior notice. Drawing will not be updated. MOD JACK - RJ45 8P8C, 1x1, CATEGORY 5 203489 www.ERNI.com Class MJ I (1/1) A3