5kW Single-Phase ATS/Metered PDU, 208V Outlets (16 C13, 2 C19 & 1 L6-30R) 2 L6-30P 10ft inputs, 2U Rack-Mount, TAA Highlights Single phase 30A 208V Auto Transfer Switch / ATS Metered PDU with Solid State Switching Enables redundant-power MODEL NUMBER: PDUMH30HVAT configurations for single-corded network devices Separate primary & secondary inputs connect to any two compatible power sources 2U horizontal rackmount; 2 L6-30P inputs; 19 outlets (16 C13, 2 C19, 1 L6-30R) Front panel digital display with LED indicators reports output amps in 4 loading segments, plus total kW and input voltage Trade Agreements Act / TAA Compliant for GSA Schedule purchases Description Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network Package Includes devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary Auto Transfer Switch PDU Rackmount installation brackets Installable plug-retention shelves & cable ties inputs occurs in 1-5 milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Features 208V 30A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 24A continuous) ATS features provide redundant power for critical network equipment with a single input power cord Digital display with selection button reports voltage, amperage and kilowatt loading information in four output segments (Segment 1: 8 C13 & 1 C19 outlets / Segment 2: 8 C13 & 1 C19 outlets / Segment 3: L6-30R outlet / Segment 4: total output of all outlets combined) 19 built-in outlets (16 C13, 2 C19, 1 L6-30R) Set of two 10 ft. / 3m NEMA L6-30P input cables support connection to separate PRIMARY and SECONDARY power sources ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output as sourced from the secondary input cable until power on the primary input is restored and stable ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a 2 UPS environment, the primary input must be connected to an online double conversion UPS similar to 1/3 Tripp Lite SmartOnline series) Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source Super-fast switchover between primary and secondary power sources occurs in 1-5 milliseconds Front panel LEDs confirm power availability on both input lines Trade Agreements Act / TAA Compliant for GSA Schedule purchases Specifications OVERVIEW PDU Type Metered; Auto-Transfer Switch OUTPUT Output Capacity Details 5kW (208V), 4.8kW (200V) total capacity / 30A max (Agency de-rated to 24A), 24A max per L6-30R outlet; 20A max per breakered outlet bank; 16A max per C19 outlet; 12A max per C13 outlet Frequency Compatibility 60 Hz Output Receptacles (16) C13; (2) C19; (1) L6-30R Output Nominal Voltage 200; 208 Overload Protection Includes two 20A output circuit breakers; Breaker 1 controls the upper row of 9 outlets (8 C13, 1 C19); Breaker 2 controls the lower row of outlets (8 C13, 1 C19); L5-30R outlet is unbreakered INPUT PDU Input Voltage 200; 208 Recommended Electrical Service 30A 208V Maximum Input Amps 30 Maximum Input Amps Details Agency de-rated to 24A continuous Input Connection Type Two labelled NEMA L6-30P cables support Primary and Secondary input connections PDU Plug Type NEMA L6-30P Input Cord Length (ft.) 10 Input Cord Length (m) 3 Input Phase Single-Phase USER INTERFACE, ALERTS & CONTROLS Front Panel LCD Display Digital display reports output amps in 4 separately metered loading segments (BANK 1: Outlets #1-9; BANK 2: Outlets #10-18; BANK 3: Outlet #19), whole-PDU output kW load level and input voltage on primary and secondary input lines Front Panel LEDs Front panel LEDs confirms amp / kilowatt / voltage reporting information 2/3 Switches ENTER and MODE switches toggle the digital display to show output amps (Banks 1-4), total kW output and input voltage (primary, secondary) PHYSICAL Minimum Required Rack Depth (inches) 16 Minimum Required Rack Depth (cm) 40.6 Shipping Dimensions (hwd / in.) 7.8 x 16.7 x 19.5 Shipping Dimensions (hwd / cm) 19.8 x 42.4 x 49.5 Shipping Weight (lbs.) 20.3 Shipping Weight (kg) 9.2 Unit Dimensions (hwd / in.) 3.5 x 17.5 x 12.5 Unit Dimensions (hwd / cm) 8.8 x 44.4 x 31.7 Unit Weight (lbs.) 13.7 Unit Weight (kg) 6.2 Material of Construction Metal Form Factors Supported 2U rackmount PDU Form Factor Horizontal (1U, 2U, etc) ENVIRONMENTAL Storage Temperature Range 5 to 122F (-15 to 50C) Relative Humidity 5 to 95% (non-condensing) Operating Elevation (ft.) 0-10,000 Operating Elevation (m) 0-3000 CERTIFICATIONS Certifications Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS Complaint, TAA Compliant WARRANTY Product Warranty Period (Worldwide) 2-year limited warranty © 2016 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: http://www.tripplite.com/products/product-certification-agencies 3/3