Product Datasheet

Position a 200A fuse link less than 18 in. from the battery in the positive line to protect against high-current draw
Highlights
that may occur during inverter failure.
Delivers clean 120V AC power
1250W PowerVerter APS 12VDC 120V
Inverter/Charger with Auto Transfer Switching, 2
Outlets
from AC or DC power source
MODEL NUMBER: APS1250
UPS operation
1250W continuous output power;
2500W peak power
Auto-transfer switching option for
Protects against blackouts,
surges and EMI/RFI line noise
Rugged polycarbonate housing
resists moisture and impact
Package Includes
APS1250 1250W PowerVerter
APS 12V DC 120V AC
Inverter/Charger
Owner’s manual
Description
The APS1250 1250W PowerVerter APS 12V DC 120V AC Inverter/Charger is a reliable power source for a wide variety of equipment ranging from power
tools and pumps to portable lighting and computer equipment in heavy-load conditions. With no fumes, fuel or excess noise, it’s an excellent alternative to
generator power.
The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter,
standalone AC power source or extended-run UPS. It delivers 1250W of continuous power, 1875W up to one hour, or 2500W of peak power up to 10 seconds
during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.
Designed for easy installation in RVs, over-the-road trucks, fleet vehicles and emergency vehicles, the APS1250 converts stored power from any 12V battery or
automotive DC source to safe, stable, computer-grade AC power and sends it to two NEMA 5-15R outlets for unlimited runtime. When powered by an external
120V AC source, the unit keeps the user-supplied battery charged via a three-stage 30A charging system while simultaneously delivering AC power to
connected equipment.
When used as a UPS, the APS1250 responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived AC output. LEDs on the
unit indicate load level, battery charge level, shutdown status and system fault status.
Features
Reliable Power for Mobile, Emergency and Remote Sites
Generates safe, stable, computer-grade 120V AC power from 12V battery bank
Ideal for powering tools, saws, motors, pumps, portable lighting, appliances and computer equipment in heavy-load conditions
Designed for easy installation in RVs, over-the-road trucks, fleet vehicles and emergency vehicles
Functions as a vehicle inverter, standalone AC power source or extended-run UPS
1/4
Features 2 front NEMA 5-15R outlets
Unlimited runtime with variety of user-supplied batteries
Meets Normal and Peak Power Demands
1250W of continuous power
1850W of reserve power up to 1 hr.
2500W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling
Automatic overload detector, built-in cooling fan and resettable AC circuit breaker protect unit from damage
Automatic Transfer Switching
Transfer relay switches to inverter power during blackout in 16.6 ms
3-position switch enables Auto, Charge Only or System Off mode
DIP switches configure high and low voltage auto-transfer
3-Stage 30A Battery Charger
Serves as battery charger when external 120V AC power is supplied and powering connected equipment
Protects battery from overcharging and overdischarging
Low-battery protection prevents excessive battery depletion
DIP switches configure wet/gel charging profiles
Optional Remote Control Capability
RJ45 communication port allows connection of optional remote control module, such as Tripp Lite’s APSRM4
Front-Panel LEDs
Indicate load level, battery charge level, shutdown status and system fault status
Rugged Polycarbonate Housing
Resists moisture, vibration and impact
Built-in mounting feet for installation on any rigid horizontal surface
Grounding lug connects unit to earth ground or vehicle grounding system
Built-in 6 ft. AC power cord with NEMA 5-15P plug connects to AC power source
Specifications
OUTPUT
Nominal Output Voltage(s)
Supported
120V
Frequency Compatibility
60 Hz
Output Receptacles
(2) 5-15R
Output (Watts)
1250
Continuous Output Capacity (Watts)
1250
Peak Output Capacity (Watts)
2500
2/4
Output Voltage Regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Output Frequency Regulation
60 Hz (+/- 0.3 Hz)
Overload Protection
Includes 8A input breaker dedicated to the charging system and 12A output breaker for AC output loads
INPUT
Nominal Input Voltage(s) Supported
120V AC
Recommended Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC
INPUT: 120VAC
Maximum Input Amps / Watts
DC INPUT: Full continuous load - 127A at 12V DC. AC INPUT: 12 amps at 120VAC with full inverter and charger
load (6.3A max charger-only)
Input Connection Type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
Voltage Compatibility (VAC)
120
Voltage Compatibility (VDC)
12
BATTERY
Expandable Battery Runtime
Runtime is expandable with any number of user supplied wet, gel or SLA batteries
DC System Voltage (VDC)
12
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery(optional)
Battery Charge
30A max, 3 step, float for long term maintenance
Expandable Runtime
Yes
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in
inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to
battery power - to maintain continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating
450
PHYSICAL
Shipping Dimensions (hwd / in.)
12.5 x 11 x 10.75
Shipping Dimensions (hwd / cm)
31.75 x 27.94 x 27.31
Shipping Weight (lbs.)
24.8
Shipping Weight (kg)
11.3
Unit Dimensions (hwd / in.)
7 x 8.75 x 9
3/4
Unit Dimensions (hwd / cm)
17.78 x 22.23 x 22.86
Unit Weight (lbs.)
23.2
Unit Weight (kg)
10.5
Cooling Method
Multi-speed fan
Material of Construction
Polycarbonate
Receptacle Color
BLACK
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to
Battery Mode)
16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer
time compatibility of loads for UPS applications)
Low Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95,
105V - see manual)
High Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to
145 - see manual)
SPECIAL FEATURES
Remote Control Capability
Yes
WARRANTY
Product Warranty Period (U.S. &
Canada)
1-year limited warranty
Product Warranty Period
(International)
2-year limited warranty
Product Warranty Period (Mexico)
2-year limited warranty
Product Warranty Period (Puerto
Rico)
1-year limited warranty
© 2016 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
http://www.tripplite.com/products/product-certification-agencies
4/4