Product Change Notification PCN Number: SC133208 Notification Date: October 10, 2013 Title: Change of Cover Tape Material from KOSTAT to ADVANTEK HUC for Use on 8mm Carrier Tape for Atmel UDFN (2.0x3.0mm) and VFBGA U3 (1.5x2.0mm) Packages Product Identification: This PCN affects the following Active Products (product by row, package by column) Density 1k 2k 2k 4k 8k 16k 32k 64k 128k 256k 512k 1k 2k 4k 8k 16k 32k 64k 128k 256k 1k 2k 4k 16k VFBGA Products AT24C01C-CUM-T AT24C02C-CUM-T AT34C02D-CUM-T AT24C04C-CUM-T AT24C08C-CUM-T AT24C16C-CUM-T AT25010B-CUL-T AT25020B-CUL-T AT25040B-CUL-T AT25080B-CUL-T AT25160B-CUL-T AT93C46DU3-UU-T AT93C56B-CUM-T AT93C66B-CUM-T AT24C01C-MAHM-T AT24C02C-MAHM-T AT34C02D-MAHM-T AT24C04C-MAHM-T AT24C08C-MAHM-T AT24C16C-MAHM-T AT24C32D-MAHM-T AT24C64D-MAHM-T AT24C128C-MAHM-T AT24C256C-MAHL-T AT24C512C-MAHM-T AT25010B-MAHL-T AT25020B-MAHL-T AT25040B-MAHL-T AT25080B-MAHL-T AT25160B-MAHL-T AT25320B-MAHL-T AT25640B-MAHL-T AT25128B-MAHL-T AT25256B-MAHL-T AT93C46DY6-YH-T AT93C56B-MAHM-T AT93C66B-MAHM-T AT93C86AY6-10YH-1.8 UDFN Products AT24CS01-MAHM-T AT24CS02-MAHM-T AT24MAC402-MAHM-T AT24CS04-MAHM-T AT24CS08-MAHM-T AT24CS16-MAHM-T AT24CS32-MAHM-T AT24CS64-MAHM-T AT24MAC602-MAHM-T AT25256B-MAHLGL-T AT93C66B-MAHMFX-T AT93C66B-MAHMGX-T This PCN also affected the following EOL products1: Density VFBGA Products UDFN Products 1k AT24C01BU3-UU-T AT24C01BY6-YH-T 2k AT24C02BU3-UU-T AT24C02BY6-YH-T AT24C02BU3-UUCY-T 2k AT34C02CU3-UU-T AT34C02CY6-YH-T AT34C02CY6-YHDD-T 4k AT24C04BU3-UU-T AT24C04BY6-YH-T 8k AT24C08BU3-UU-T AT24C08BY6-YH-T 16k AT24C16BU3-UU-T AT24C16BY6-YH-T 32k AT24C32CY6-YH-T 64k AT24C64CY6-YH-T 128k AT24C128BY6-YH-T 2k AT93C56AU3-10UU-1.8 4k AT93C66AU3-10UU-1.8 AT24C08BY6-YHCP-T AT93C56AY6-10YH-1.8 1. EOL products are for backlog supporting last time buy & last time ship opportunities only ATMEL San Jose QF-8003 Rev. 10 05/09/2013 1600 Technology Dr, San Jose CA 95110 USA Page 1 of 3 PCN NO. SC133208 Page 2 of 3 Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: To support growing demand for leadless package and improve overall throughput, the current material and supplier for 8mm cover tape is changing from KOSTAT to ADVANTEK HUC for use at Amkor Technology Philippines (ATP). Identification Method to Distinguish Change: Starting ww36 (September 2013) ALL material from ATP will use the Advantek HUC Cover tape. Lots processed/sealed prior WW36 using the new cover tape will be identified using a green dot sticker identifier on the reel. Qualification Data: Available Will be available (mm/dd/yr): Not Applicable Samples: Available Will be available (mm/dd/yr): Not Applicable Quantifiable Impact on Quality & Reliability: No impact. Form, fit and function remains unchanged. Proposed First Ship Date*: Immediately *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or noninfringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. ATMEL San Jose QF-8003 Rev. 10 05/09/2013 1600 Technology Dr, San Jose CA 95110 USA PCN NO. SC133208 Page 3 of 3 CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL San Jose QF-8003 Rev. 10 05/09/2013 1600 Technology Dr, San Jose CA 95110 USA