Data sheet... SAK terminal with screw connection EK 4 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com In order to do justice to the different requirements placed on our products, it is necessary to use various insulating materials tailored to the particular application. None of the insulating materials used by Weidmüller contain any hazardous substances. Above all, we ensure that all our materials are free from cadmium. Furthermore, they contain no colour pigments based on heavy metals and do not lead to the formation of dioxin/furan. General ordering data Order No. Type Version GTIN (EAN) Qty. 0354560000 EK 4 SAK terminal with screw connection, Earth terminal, Rated cross-section: 4 mm², Screw connection, PA 66, green/yellow, Direct mounting 4008190104849 100 pc(s). Creation date September 11, 2012 12:15:03 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal with screw connection EK 4 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Weight 40 mm 51.5 mm 22.99 g Width Height of lowest version Net weight 8 mm 51.5 mm 22.02 g -50 °C Storage temperature Continuous operating temp., max. 100 °C Temperatures Operating temperature Continuous operating temp., min. Rated data IECEx/ATEX Certificate No. (ATEX) ATEX certificate IEC Ex certificate Wire cross section max. (IECEX) Operating temperature range Marking ATEX Directive 94/9/EC KEMA97ATEX1798U KEMA97ATEX1798U_e.pdf IECEXKEM06.0014U_e.pdf 4 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D ATEX certificate Certificate No. (IECEX) Wire cross section max. (ATEX) Voltage, cross-connection Marking EN 60079-7 IECEXKEM06.0014U IECEXKEM06.0014U 4 mm² CrossConnectionGuide.pdf Ex e II Additional technical data Explosion-tested version Number of similar terminals Type of mounting Yes 1 Screwed Installation advice Open sides Direct mounting closed 12400-235 26 AWG Wire cross section max. (CSA) 10 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. CSA ratings data Certificate No. (CSA) Wire cross section min. (CSA) Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 0.5 mm² 4 mm² Creation date September 11, 2012 12:15:03 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal with screw connection EK 4 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Clampable wires (rated connection) Type of connection Blade size Number of connections Clamping range, rated connection, max. Tightening torque, min. Gauge to IEC 60947-1 Screw connection 0.6 x 3.5 mm 2 6 mm² 0.5 Nm Stripping length 12 mm Connection direction on side Clamping range, rated connection, min. 0.33 mm² Clamping screw M3 Tightening torque, max. 1 Nm Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 0.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. AWG 22 Rated voltage to adjoining terminal Standards Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG PA 66 Yellow, Green Material UL 94 flammability rating SAK terminal with screw connection on side 2 No No Type of connection Number of levels No. of clamping points per level Mounting rail EC000901 30-21-18-11 27-14-03-05 27-14-03-05 ETIM 3.0 eClass 4.1 eClass 6.0 A4 Wire connection cross section, solid core max. rated connection 6 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 4 mm² Wire connection cross section AWG, max. AWG 10 Rated data Rated cross-section Rated impulse withstand voltage to adjacent terminal Pollution severity 4 mm² 8 kV 3 800 V IEC 60947-7-2 UL ratings data Certificate No. (UR) E60693VOL1SEC9 Conductor size Factory wiring min. (UR) 26 AWG Material data Insulating material Colour PA 66 V-2 System specifications Product family Connection direction Number of connections Levels cross-connected internally End cover plate required Screw connection 1 2 TS 32 Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC000901 27-14-03-05 27-14-03-05 Creation date September 11, 2012 12:15:03 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3 Data sheet... SAK terminal with screw connection EK 4 Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Approvals Approvals Downloads DXF STEP 07238_EK_4_DXF.dxf 0354560000_07238_EK_4_STP.stp Creation date September 11, 2012 12:15:03 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 4