Product Datasheet

5/5.8kW Single-Phase Basic PDU, 208/240V Outlets
(6 C19 and 32 C13), L6-30P, 10ft Cord, 0U Vertical
MODEL NUMBER: PDUV30HV
Highlights
Basic 0U 63.75 in. vertical rack
PDU
208/240V 30A maximum capacity
10 ft. input cable with locking
L6-30P plug
38 total output receptacles (6
C19, 32 C13)
Ready for immediate toolless 0U
installation
Package Includes
PDUV30HV 63.75 inch basic
PDU
Plug-lock inserts (6 C20, 32 C13)
Spare installation buttons, 2.9
mm/4.6 mm
Mounting hardware
Owner’s Manual
Description
Tripp Lite Basic Power Distribution Units / PDU systems offer reliable rackmount power distribution. Supplies
equipment with continuous power from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and
secure rackmount installation with included mounting accessories. Included C20 and C14 plug-lock inserts connect to your components’ plugs to ensure they
remain connected and continuously powered.
Features
208/240V 30A Basic Power Distribution Unit / PDU
30A maximum capacity (Agency derated to 24A continuous)
Attached L6-30P input plug with 10 ft. / 3m input cable
0U, 63.75 in. / 162cm vertical form factor supports installation in 2 or 4 post equipment racks
38 total 208V outlets (6 C19, 32 C13) are split equally into two separately breakered 15A loading segments
Sleeved circuit breaker assembly prevents accidental shutoff and requires no tools to reset if tripped
Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment
Included plug-lock inserts ensure components remain connected and powered
Toolless mounting supported in button-mount compatible racks
Included nut and bolt mounting brackets support installation in non button-mount compatible racks and other flat surfaces
Specifications
OVERVIEW
PDU Type
Basic
OUTPUT
1/3
Output Capacity Details
5.8kW (240V), 5kW (208V), 4.8kW (200V) total capacity / 30A max (Agency de-rated to 24A), 20A max per
breakered outlet bank; 16A max per C19 outlet; 12A max per C13 outlet
Frequency Compatibility
50 / 60 Hz
Output Receptacles
(32) C13; (6) C19
Output Nominal Voltage
200; 208; 240
Overload Protection
Two 15A breakers protect 19 outlets each
INPUT
PDU Input Voltage
200; 208; 240
Recommended Electrical Service
30A 208/240V
Maximum Input Amps
30
Maximum Input Amps Details
Agency de-rated to 24A
PDU Plug Type
NEMA L6-30P
Input Cord Length (ft.)
10
Input Cord Length (m)
3.05
Input Phase
Single-Phase
USER INTERFACE, ALERTS & CONTROLS
Switches
n/a
PHYSICAL
Shipping Dimensions (hwd / in.)
64.5 x 3.5 x 4.75
Shipping Dimensions (hwd / cm)
163.8 x 8.9 x 12.1
Shipping Weight (lbs.)
13
Shipping Weight (kg)
5.9
Unit Dimensions (hwd / in.)
63.75 x 2.25 x 3.75
Unit Dimensions (hwd / cm)
162 x 5.7 x 9.5
Unit Weight (lbs.)
8
Unit Weight (kg)
3.6
Material of Construction
Metal
Form Factors Supported
0u vertical installation in equipment racks, plus under-counter and wallmount
PDU Form Factor
Vertical (0U)
ENVIRONMENTAL
Storage Temperature Range
5 to 122F (-15 to 50C)
Relative Humidity
5-95% non-condensing
Operating Elevation (ft.)
0-10,000
2/3
Operating Elevation (m)
0-3000
CERTIFICATIONS
Certifications
Tested to UL60950-1 (USA, Canada), NOM (Mexico)
WARRANTY
Product Warranty Period (Worldwide)
5-year limited warranty
© 2016 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
http://www.tripplite.com/products/product-certification-agencies
3/3