Bulletin I2121 rev. C 12/01 SAFEIR Series 10ETS12, 10ETS12S INPUT RECTIFIER DIODE VF < 1V @ 10A IFSM = 200A VRRM 800 to 1200V Description/Features The 10ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Package Outline Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. TO-220AC Major Ratings and Characteristics Package Outline Characteristics IF(AV) Sinusoidal waveform VRRM Range IFSM VF @ 10 A, TJ = 25°C TJ 10ETS.. Units 10 A 800 to 1200 V 200 A 1.1 V - 40 to 150 °C D2 Pak (SMD-220) Output Current in Typical Applications Applications Capacitive input filter TA = 55°C, TJ = 125°C common heatsink of 1°C/ W www.irf.com Single-phase Bridge Three-phase Bridge Units 12.0 16.0 A 1 10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 Voltage Ratings VRRM , maximum VRSM , maximum non repetitive IRRM Part Number peak reverse voltage V peak reverse voltage V 150°C mA 10ETS08, 10ETS08S 800 900 0.5 10ETS12, 10ETS12S 1200 1300 Absolute Maximum Ratings Parameters 10ETS.. Units 10 A IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive 170 Surge Current 200 Max. I2t for fusing 130 A A2s 145 2 I √t 2 Max. I √t for fusing Conditions @ TC = 105° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 2 1450 A √s 10ETS.. Units t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters VFM Max. Forward Voltage Drop 1.1 V rt Forward slope resistance 20 mΩ VF(TO) Threshold voltage 0.82 V IRM 0.05 Max. Reverse Leakage Current mA 0.50 Conditions @ 10A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Thermal-Mechanical Specifications Parameters 10ETS.. Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C 2.5 °C/W 62 °C/W RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient (PCB Mount)* Ts Soldering Temperature wt Approximate Weight Case Style 240 °C 2 (0.07) g (oz.) Conditions DC operation TO-220AC, D2Pak (SMD-220) * When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 2 www.irf.com 10ETS.., 10ETS..S SAFEIR Series 150 10ET S.. Se rie s R thJC (D C ) = 2.5 C /W 140 130 C o n ductio n Angle 120 110 100 30 60 90 90 120 180 80 0 2 4 6 8 10 12 M axim um A llo w a b le C ase Te m p erat ure ( C) M a xim um Allow ab le C a se T em pera ture ( C ) Bulletin I2121 rev. C 12/01 150 10ETS.. Se ries R thJC (D C ) = 2.5 C /W 140 130 C ond uctio n Perio d 120 110 30 60 100 90 120 0 2 RM S Lim it 8 6 4 C o nd u ctio n Angle 2 10ET S.. Se ries T J = 150 C 0 2 4 6 8 10 M ax im um A ve ra ge Fo rw ard P ow e r Lo ss (W ) 10 8 10 12 DC 14 16 18 20 DC 180 120 90 60 30 18 16 14 12 10 RM S Lim it 8 6 C o nd uctio n P erio d 4 10E TS.. Se ries T J = 150 C 2 0 0 2 4 6 8 10 12 14 16 A verag e Fo rw a rd C urren t (A) A verag e Fo rw ard C urren t (A ) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics 200 180 A t A n y Ra te d Lo a d C o n dition A nd W ith R ated V RRM A p p lie d Fo llo w ing Surg e . In itia l T J = 150 C 160 @ 60 H z 0.0083 s @ 50 H z 0.0100 s 140 120 100 80 10E TS.. Se rie s 60 40 1 10 100 N um b er O f Eq ual A m p litude Half C ycle Current Pulses (N ) Fig. 5 - Maximum Non-Repetitive Surge Current www.irf.com P ea k H a lf Sin e W a ve Fo rw a rd C urre nt (A ) M axim um A vera ge Fo rw ard Pow e r Loss (W ) Pea k H a lf Sin e W a ve Forw a rd C urren t (A ) 180 120 90 60 30 0 6 Fig. 2 - Current Rating Characteristics 16 12 4 Avera ge Forw a rd C urre nt (A) A ve rag e Fo rw a rd C urrent (A ) Fig. 1 - Current Rating Characteristics 14 180 90 240 M a xim um N on R e p etitive S urg e C urre n t V e rsu s Pu lse Tra in D u ra tion . In itia l T J = 150 C 200 No V o ltag e Re ap plie d Ra ted V RR M Reap p lie d 180 220 160 140 120 100 80 60 40 0.01 10ETS.. Se rie s 0 .1 1 Pu lse Tra in D u ra tion (s) Fig. 6 - Maximum Non-Repetitive Surge Current 3 10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 Insta ntan eous Forw ard C urrent (A ) 100 T J= 25 C T J= 150 C 10 10ETS.. Se ries 1 0 0.5 1 1.5 2 2.5 3 Instan ta n eo us Forw a rd V olta g e (V ) Tran sient The rm al Im pe da nc e Z thJC ( C /W ) Fig. 8 - Forward Voltage Drop Characteristics 10 D D D D D = = = = = 0.50 0.33 0.25 0.17 0.08 Stead y State Value (D C O peration) 1 10ETS.. Se ries Single Pulse 0.1 0.0001 0.001 0.01 0.1 1 10 Square W ave Pulse D uration (s) Fig. 9 - Thermal Impedance ZthJC Characteristics 4 www.irf.com 10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 2 3.54 (0.14) 1.32 (0.05) 1.22 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 Base Cathode 2 2° 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) 0.10 (0.004) 2.04 (0.080) MAX. 1 1.40 (0.05) Cathode 2.89 (0.11) 1.15 (0.04) 3 Anode 2.64 (0.10) 0.94 (0.04) 0.69 (0.03) 1 3 0.61 (0.02) MAX. 4.57 (0.18) 4.32 (0.17) TO-220AC Dimensions in millimeters (inches) 5.08 (0.20) REF. 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93° 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X REF. 1.40 (0.055) 1.14 (0.045) 2X Base Cathode 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 2 1 3 4.57 (0.18) 4.32 (0.17) 2 8.89 (0.35) 17.78 (0.70) 0.61 (0.02) MAX. 3 1 Anode Anode 5.08 (0.20) REF. D2Pak (SMD-220) Dimensions in millimeters and inches 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X www.irf.com 5 10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 Marking Information EXAMPLE: THIS IS AN 10ETS12S (K) INTERNATIONAL RECTIFIER LOGO PART NUMBER 10ETS12S 9G3A 9512 ASSEMBLY DATE CODE (YYWW) LOT CODE (A) YY = YEAR WW = WEEK (A) Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) FEED DIR ECTION 1.85 (0.073) 11.60 (0.457) 11.40 (0.449) 1.65 (0.065) 15.42 (0.609) 15.22 (0.601) TRL 1.75 (0.069) 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 24.30 (0.957) 23.90 (0.941) DIA. 16.10 (0.634) 4.72 (0.186) 4.52 (0.178) 15.90 (0.626) FEED DIRECTION Dimensions in millimeters and inches 13.50 (0.532) 12.80 (0.504) DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples 360 (14.173) DIA. MAX. 6 60 (2.362) of 800 pieces per reel for both TRL and TRR. DIA . MIN. www.irf.com 10ETS.., 10ETS..S SAFEIR Series Bulletin I2121 rev. C 12/01 Ordering Information Table Device Code 10 E T S 12 S TRL 1 2 3 4 5 6 7 1 - Current Rating 2 - Circuit Configuration 3 - Package E = Single Diode T = TO-220AC 4 - Type of Silicon S = Standard Recovery Rectifier 08 = 800V 5 - Voltage code: Code x 100 = VRRM 12 = 1200V 6 - S = TO-220 D2Pak (SMD-220) Version 7 - Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/01 www.irf.com 7