SAIBA MAIS

Specifications
PT-RZ12K Series
Model
PT-RZ12K
Power supply
AC 100–240 V, 50/60 Hz
Power consumption
1200 W (0.3 W with Standby Mode set to Eco, 4 W with Standby Mode set to Normal)
Normal Mode: 800 W, Eco Mode: 680 W, Long Life 1 Mode: 620 W, Long Life 2 Mode: 590 W, Long Life 3 Mode: 550 W (Operating temperature: 25 °C, Altitude: 700 m,
IEC62087: 2008 Broadcast Content, Image Mode: Dynamic, Dynamic Contrast Mode: 3)
DLP™ chip
Panel size
24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
Display method
DLP™ chip × 3, DLP™ projection system
Pixels
6,912,000 (1920 x 1200 x 3) pixels
PT-RS11K
4,410,000 (1400 x 1050 x 3) pixels
120 Hz*1
Lens
Optional (no lens included with this model)
Light source
Laser diodes laser Class 1 (Class 3R for US models)
Light source life*2: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode), At this time the brightness will have decreased to approximately half of its original level.
Screen size (diagonal)
1.78–25.4 m (70–1000 in) with 16:10 aspect ratio
1.78–15.24 m (70–600 in) with the ET-D75LE8, 16:10 aspect ratio
3.05–15.24 m (120–600 in) with the ET-D75LE90, 16:10 aspect ratio
12,000 lm
Center-to-corner uniformity*2
90 %
Contrast*2
20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution
Scanning
frequency
1920 x 1200 pixels
SDI
PT-RZ12K
PT-RS11K
24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
Refresh rate
Brightness*2
3-Chip DLP™ Projectors
1.78–25.4 m (70–1000 in) with 4:3 aspect ratio
1.78–15.24 m (70–600 in) with the ET-D75LE8, 4:3 aspect ratio
3.05–15.24 m (120–600 in) with the ET-D75LE90, 4:3 aspect ratio
1400 x 1050 pixels
SD-SDI: SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
Single link HD-SDI: SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit] 720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
Dual link HD-SDI: SMPTE ST 372 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 2048 x 1080/24p, 2048 x 1080/24sF,
[X’Y’Z’ 4:4:4 12-bit] 2048 x 1080/24p, 2048 x 1080/24sF
3G-SDI: SMPTE ST 424 compliant, [RGB 4:4:4 12-bit/10-bit] 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [YPBPR 4:2:2 10-bit] 1080/60p, 1080/50p
Dual link 3G-SDI: SMPTE ST 425 compliant, [YPBPR 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p,
[RGB 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p
Optical
axis shift*5
HDMI/DVI-D
Compatible with HDCP, 480i*3, 576i*3, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
640 x 480–WUXGA*4 (1920 x 1200) (compatible with non-interlaced signals only), dot clock: 25–162 MHz
RGB
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR)
fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)], fH: 15.63 kHz, fV: 50 Hz [576i (625i)], fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)], fH: 31.25 kHz, fV: 50 Hz [576p (625p)],
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p], fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p], fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i], fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i],
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i], fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p], fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p], fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF],
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p], fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p], fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/YC
H: 15.75 kHz, fV: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), fH: 15.63 kHz, fV: 50 Hz (PAL/PAL-N/SECAM)
Vertical (from center of screen)
Horizontal (from center of screen)
±55 % (±44 % with the ET-D75LE6, +73 % – +78 % with the ET-D75LE90) (powered)
±50 % (±40 % with the ET-D75LE6, +71 % [fixed] with the ET-D75LE90) (powered)
±20 % (±15 % with the ET-D75LE6, ±6 % with the ET-D75LE90) (powered)
±30 % (±20 % with the ET-D75LE6, fixed with the ET-D75LE90) (powered)
Keystone correction range
Keystone correction range with optional
Upgrade Kit ET-UK20
Installation
Terminals
Vertical: ±40 ° (± 22 ° with ET-D75LE50, ±28 ° with ET-D75LE6, +5 ° with ET-D75LE90), horizontal: ±15 ° (0 ° with ET-D75LE90)
Vertical: ±45 ° (± 40 ° with ET-D75LE10/20, ±22 ° with ET-D75LE50, ±28 ° with ET-D75LE6, +5 ° with ET-D75LE90), horizontal: ±40 ° (±15 ° with ET-D75LE50/6, 0 ° with ET-D75LE90),
Up to a total of ±55 ° during simultaneous horizontal and vertical correction.
Horizontal/vertical, free 360-degree installation
SDI IN 1
BNC × 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (LINK-A), Dual-link 3G-SDI (LINK 1)
SDI IN 2
BNC × 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (LINK-B), Dual-link 3G-SDI (LINK 2)
HDMI IN
HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
DVI-D IN
DVI-D 24-pin × 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Taking Laser Projection to a Whole New Level.
RGB 1 IN
RGB × 1 (BNC × 5): RGB/YPBPR/YCBCR/YC/VIDEO
RGB 2 IN
D-sub HD 15-pin (female) × 1: RGB/YPBPR/YCBCR
3D SYNC 1 IN/OUT
BNC × 1: 3D timing signal
3D SYNC 2 OUT
BNC × 1: 3D timing signal
SERIAL IN
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
SERIAL OUT
D-sub 9-pin (male) × 1 for link control
REMOTE 1 IN
M3 × 1 for wired remote control, link control
REMOTE 1 OUT
M3 × 1 for wired remote control, link control
REMOTE 2 IN
D-sub 9-pin (female) × 1 for external control (parallel)
DIGITAL LINK/LAN
RJ-45 × 1 for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP
Cabinet materials
Molded plastic
Dimensions (W × H × D)
578 x 270 x 725 mm (22 3/4˝ × 10 5/8˝ × 28 17/32˝ ) (Not including legs or protruding parts)
578 x 323.5 x 740 mm (22 3/4˝ × 12 23/32˝ × 29 1/8˝ ) (Including legs at shortest position and protruding parts)
Weight*6
Approximately 44 kg (97 lbs.) (optional lens not included)
Operation noise*2
43 dB
Operating environment
Operating temperature: 0–50 °C (32–122 °F)*7, operating humidity: 10– 80 % (no condensation)
Applicable software
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10*8 Auto Screen Adjustment Upgrade Kit)
Supplied accessories
Power cord x 1 (x 2 for “E” model), wireless/wired remote control unit, batteries (R6/AA type × 2), software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software), lens fixing screw
*1 Refresh-rate varies depending on vertical scanning frequency. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal). *4 WUXGA resolution is supported
only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *5 Optical axis shift is not supported on the ET-D75LE50. *6 Average value. May differ depending on the actual unit. *7 When operational mode is set to Normal, operating temperature is from 0
°C (32 °F) to 50 °C (122 °F), and operating temperature is from 0 °C (32 °F) to 45 °C (113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to Eco or Long Life 1/2/3, operating temperature is from 0 °C (32 °F) to 45 °C
(113 °F). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F) to 40 °C (104 °F). Projector cannot be used in locations over 2,700 m (8,858 ft) with operational mode set to Eco or Long Life 1/2/3. When used with Smoke Cut Filter, the projector cannot be used in locations
over 1,400 m (4,593 ft). Light source brightness may decrease depending on operating temperature. When projector is operating at high temperature, brightness will decrease correspondingly. *8 Available worldwide except in the United States.
For more information about Panasonic projectors, please visit:
Projector Global Website – panasonic.net/avc/projector
Facebook – www.facebook.com/panasonicprojector
YouTube – www.youtube.com/user/PanasonicProjector
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without
notice. Product availability differs depending on region and country. This product may be subject to export control
regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments.
The projection distances and throw ratios given in this leaflet are for use only as guidelines. For more detailed
information, please consult the dealer from whom you are purchasing the product. The PJLink trademark is an
application trademark in Japan, the United States, and other countries and regions or registered trademarks. HDMI,
the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries. All other trademarks are the property of their respective trademark
owners. Projection images simulated. 36 USC 220506 © 2015 Panasonic Corporation. All rights reserved.
All information included here is valid as of September 2015.
PT-RZ12KG1 Printed in Japan.
Lenses sold separately.
Reference Laser
Performance That
Lasts Longer
The 12,000 lm PT-RZ12K 3-Chip DLP™ Series
projectors combine class-leading imaging with the
3-Chip DLP™ Projection Meets Next-Generation SOLID SHINE Laser
Bright and Vivid Picture Quality
Accurate Color Reproduction
Combining 3-Chip DLP™ imaging with Panasonic’s original SOLID SHINE
The PT-RZ12K Series captures a more accurate Rec. 709-compliant
Laser technology, the PT-RZ12K Series achieves truly stunning picture
color space than comparable laser projectors. A blue laser ensures
quality. Two powerful solid-state laser light sources, a heat-resistant
greater precision while an expanded color gamut improves white
phosphor wheel, and three independent DLP™ chips for red, green, and
balance accuracy.
blue ensures class-leading brightness, color accuracy, and contrast.
practical advantages of Panasonic SOLID SHINE
Heat-resistant phosphor wheel
ensures high brightness and
excellent reliability for long periods.
Laser technology: minimal picture quality degradation
over long periods in continuous use, 20,000-hour
maintenance-free operation*1, flexible installation,
failsafe reliability, and a wealth of powerful features
for creative visual presentations in large spaces.
3-Chip DLP™ Projectors
PT-RZ12K
12,000 lm WUXGA
PT-RS11K
12,000 lm
SXGA+
Eco Filter Extends
Replacement to
20,000 Hours*2
The Eco Filter has an electrostatic
Micro Cut Filter that collects
minute dust particles with an ion
Ultra-Durable Laser
Optical Engine for Continuous
24-hour Operation
effect. It joins with a dustresistant cabinet to enable
long-term use even in punishing
conditions. A long maintenance
cycle of up to 20,000 hours*2
reduces hassle, and the ecofriendly washable filter*3 can be
reused, reducing cost and waste.
Dustproof for Ultimate Endurance
Dual Drive Laser Optical Engine uses two discrete
The PT-RZ12K Series has hermetically sealed laser modules, a
A failsafe laser light source redundancy circuit
long-life Eco Filter, and a new air-intake system to extend life
ensures minimal reduction in brightness and color
and maintain picture quality
contamination.
ity in locations with dust contaminatio
uniformity in the event of laser diode failure, making
SOLID SHINE Laser
PT-RZ12K Series ideal for mission-critical
products exceed rigorous
s
applications. Further, brightness decreases gradually
dustproofing requirements
ts
and in a linear rather than exponential fashion (as is
for operation in
common to lamp-based projectors) over its
environments containing
20,000-hour*1 maintenance-free service life.
light sources grouping laser diodes into modules.
0.150 mg of dust per cubic
ic
meter*4.
Efficient Cooling System Assures Reliable Operation
The PT-RZ12K Series employs a newly developed direct liquid cooling system for the
laser light source that features a redesigned air intake and a solid aluminum heat sink to
suppress temperature rises. This allows stable operation in ambient temperatures of up
to 50 °C (122 °F)*5 while reducing operating noise to just 43 dB.
*1 At this time the brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). Light source
lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. *2 Usage environment may affect filter maintenance cycle. *3 Please follow the procedures listed in the operating instructions
when washing the filter with water. Replacement is recommended after filter has been washed and reused twice, or if filter is not sufficiently clean after washing. *4 Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m 3 of
particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE ], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests. *5 When operational mode is set to Normal,
operating temperature is from 0 °C (32 °F ) to 50 °C (122 °F ), and operating temperature is from 0 °C (32 °F ) to 45 °C (113 °F ) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft ) above sea level. When operational mode is set to Eco or Long Life 1/2/3,
operating temperature is from 0 °C (32 °F ) to 45 °C (113 °F ). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F) to 40 °C (104 °F ). Projector cannot be used in locations over 2,700 m (8,858 ft) with operational mode set to Eco or Long Life 1/2/3.
When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may decrease depending on operating temperature. When projector is operating at high temperature, brightness will decrease correspondingly.
2
P2-3
3
System and Installation Flexibility with Powerful Functionality
Magnificent Image Quality and Reliable Operation
Original Panasonic Technology Reduces Motion Blur
Together with a unique high-speed Real Motion Processer chip,
Panasonic has refined the PT-RZ12K Series’ optical engine to enhance
focus performance for a better sense of resolution, contrast, and fluidity.
Real Motion Processor creates supplemental frames and interpolates for
a fast 120 Hz*6 frame-rate, resulting in incredibly smooth and realistic
reproduction of motion. Further, images of up to 120 Hz*6 can be
displayed with Dual-link 3G-SDI, DVI-D, and HDMI simultaneous inputs.
System Daylight View 3 Improves Color Perception
Flexible Setup and Smooth Operation
This proprietary technology optimizes image quality to improve color
perception of images projected onto external or internal walls and other
surfaces or in environments with bright ambient light. With a brightness
of 12,000 lm, the PT-RZ12K Series delivers clear and comfortable
viewing even with the lights on.
Unlike conventional lamp-based
projectors, the PT-RZ12K Series’ SOLID
SHINE Laser system allows free
360-degree installation through any axis.
Together with powered lens shift and a
wide range of optional lenses, the
projector can be mounted in any way
desired without picture distortion.
Enhancement Level
off
1
2
3
Interpolated frames
4
5
6
Vertical 360 °
Horizontal 360 °
Geometric Adjustment for Specially Shaped Screens
This function adjusts the image for projection onto spherical,cylindrical,
and other specially shaped screens. Adjustments can be easily made
using only the remote control, with no external equipment needed.
New 4-Corner Adjustment and Keep Aspect Off functions also simplify
fine adjustment.
System Daylight View 3
System Daylight View 2
Single-Cable DIGITAL LINK Connection
Ideal for mapping
Ideal for bright environments
U i
Unique
Panasonic
Processor
24 - 60 frames per second
Frame Creation: OFF
Up to 120 frames per second
Auditoriums and Halls (Projection in Bright Environments)
Projection Mapping (Projection onto Buildings)
OFF
OFF
ON
ON
Frame Creation: ON
Transmit Video, Audio, and Control Signals Up to 150 m (492 ft) * 11
DIGITAL LINK supports transmission of uncompressed HD video,
audio, and control commands through a single cable (CAT 5e or higher
STP cable) for distances of up to 150 m (492
ft)*11. Add an optional ET-YFB200G DIGITAL
LINK Switcher or ET-YFB100G Digital
Interface Box to further simplify installation
complexity in large venues while reducing
cost and improving reliability at the same time.
DICOM Simulation Mode*8
Dynamic Contrast Achieves High 20,000:1*7 Contrast
PT-RZ12K Series projectors directly modulate laser power output to
enable high contrast and reduce power consumption. Digitally controlled
frame-by-frame scene-linking modulation ensures highly precise light
output adjustment, and accurate 20,000:1*7 contrast is achieved even
when bright and dark scenes suddenly or frequently interchange. There
is also almost no drop in contrast after extended use.
This imaging mode is similar to the DICOM Part 14 medical imaging
standard. It lends a film-like resolution to X-ray images, making the
PT-RZ12K Series ideal for medical presentations and training.
Normal Mode
DICOM Simulation Mode
Detail Clarity Processor 5 Clarifies and Enhances Fine Details
Selectable Operational Modes Maintain Image Quality Longer
This proprietary circuit analyzes each individual image frame by frame
to clarify areas containing fine details and textures. A new processing
algorithm pulls hidden information from the super high, high, medium,
and low frequency bands, sharpening outlines, correcting contours,
and reducing ringing noise to improve the sense of resolution and
clarity of fine details.
• Approx. 20,000 Hours*9 of Continuous Operation (Normal Mode)
Low-pass filter
Horizontal signal component
Vertical signal
component
Mid-pass filter
Frequency analysis engine
High-pass filter
Detail analysis engine
Super-high-pass filter
Conventional projector
Detail Clarity Processor 5
Quick Start, Quick Off
Optional Upgrade Kit (ET-UK20) Featuring Geometry Manager Pro
The laser light source does not require any warm-up time, so images
appear almost instantly with PT-RZ12K Series projectors. There’s also
no cooling time required when turning the power off. Users can turn the
projector on and off immediately as many times as necessary.
Multi-Screen Support System Seamlessly Connects Multiple Screens
• Edge Blending: The edges of adjacent screens can be blended and
their luminance controlled.
In Normal Mode with maximum 12,000 lm brightness, PT-RZ12K
Series returns approximately 20,000 hours*9 light-source service life.
Eco Mode at 9,600 lm extends light source replacement to
approximately 24,000 hours*9. These modes are suitable for roles in
education or for signage applications.
• Color Matching: This function corrects for slight variations in the color
reproduction range of individual projectors. PC software assures
easy, accurate control.
New Geometry Manager Pro software included in Panasonic’s optional
upgrade kit (ET-UK20) supports color matching, edge blending,
uniformity correction, and other useful functions for multi-projector
setups up to a maximum of 64 units. It also enables creative masking
using four lines or bitmap data. Its flexible yet sophisticated geometric
adjustment capability suits a wide variety of screen shapes. Further,
PT-RZ12K Series projectors support the optional ET-CUK10 Auto
Screen Adjustment Upgrade Kit*13.
Line Masking
Bitmap Masking
• Digital Image Enlarging: PT-RZ12K Series features a digital zoom
function that allows images to be enlarged up to 10 times
(horizontally and vertically)*12. Up to 100 units (10 x 10) can be
edge-blended at a time to create large, multi-screen images.
• Up to 10 Years*10 Operation with Constant Brightness Modes
In environments where very high brightness is not necessary, such as
surveillance, control, and simulation rooms, constant operation
modes extend light source replacement to up to 87,600 hours*10 in
Long Life 3 Mode—about 10 years of 24/7 projection—with
consistent brightness and color.
Without
edge
blending
With
edge
blending
lm
12,000
Normal
Overlapping
image edges
9,600
ECO
6,000
4,800
Create masking data
Use to overlap
projected image
Image projected only in
designated areas
Long Life 1
4,500
3,400
2,300
Operation
Edge blending
Long Life 2
Long Life 3
5,000
20,000 24,000
43,800
61,320
87,600 hrs
Waveform Monitor Function
When source device output level fluctuates due to the performance of
the device or its cable connections, the original black and white levels
of the image cannot be reproduced correctly. The PT-RZ12K Series
displays the waveforms on screen where they can be adjusted either
automatically or manually as preferred.
Black Level Adjustment
• User Operating Mode
In addition to preset operating modes, the PT-RZ12K Series can be
customized to achieve your preferred balance of brightness or
extended life. Brightness can be set from 2,300 to 12,000 lm or the
lifetime set to a maximum of 10 years.
White Level Adjustment
Color matching
Projector
Multi Monitoring & Control Software
This software lets you control and monitor multiple projectors at the
same time over wired LAN. If a problem occurs, an alert is sent to the
monitoring/controlling PC. Terminal panel is LED illuminated and
control panel buttons backlit for easy operation in the dark.
Active 3D Projection Capability
4
P-4+5
Before
Before
After
After
The PT-RZ12K Series is compatible with active 3D projection technology.
It supports a separate, external 100/120/144 Hz drive, IR emitter, and
active-shutter glasses, or an active filter and passive glasses for viewing
3D images.
*6 Refresh-rate varies depending on vertical scanning frequency. *7 With Dynamic Contrast Mode set to 3. *8 This product is not a medical instrument. Do not use for actual medical diagnosis. *9 At this time the brightness will have decreased to approximately half of its
original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). Light source lifetime may be reduced depending on environmental conditions.
Replacement of parts other than the light source may be required in a shorter period. *10 With Operating Mode set to Long Life 3, in which mode brightness is lowered to 2,300 lm. 24 hours/day x 365 days/year x 10 years = 87,600 hours. Replacement of parts other
than the light source may be required in a shorter period. Replacement parts are kept in stock for at least eight years after projector production is discontinued, after which time Panasonic cannot guarantee their availability. *11 150 m (492 ft) transmission available only
with ET-YFB200G switcher for signals up to 1080p. *12 While the input resolution will not change, maintaining image quality is not possible for images enlarged horizontally and vertically via the digital zoom function. *13 Available worldwide except in the United States.
5
Backup Input Setting Assures Reliability and Optimizes Performance
Art-Net DMX Compatible
Projection Distance
The Backup Input Setting allows the signal to be switched to the
backup input signal as smoothly as possible should the primary input
signal be disrupted*14. This function ensures high reliability and is ideal
for mission-critical control rooms, projection mapping, staging, and
other applications where image display should not be interrupted.
PT-RZ12K Series is compatible with Art-Net DMX protocol for lighting
management. Art-Net compatibility allows the projector to be
connected to a lighting console with easy control of functions such as
shutter on/off, input change, power on/off, etc., together with lighting
control.
PT-RZ12K (16:10 aspect ratio)
Conventional System
Backup Input Setting
Multiple-unit widescreen projection
P a rtial l y
Effective Lighting Management
Multiple-unit widescreen projection
b lank !
Source
Primary source
Secondary source
If the main input signal is disrupted,
image display is cut off
1.01
(3.3)
ET-D75LE6
min. max.
1.39 1.66
(4.6) (5.4)
ET-D75LE10
min. max.
1.95 2.52
(6.4) (8.3)
15.57 29.53
(51.1) (96.9)
1.47
(4.8)
2.01
(6.6)
2.41
(7.9)
2.82
(9.3)
3.63 5.28
(11.9) (17.3)
3.32 4.30
4.28 6.22
6.18 12.03 11.89 19.05 18.76 35.51
(10.9) (14.1) (14.0) (20.4) (20.3) (39.5) (39.0) (62.5) (61.5) (116.5)
1.78
(5.8)
2.43
(8.0)
2.90
(9.5)
3.81 [150˝]
2.96
(9.7)
23.54 44.47
(77.2) (145.9)
2.24
(7.3)
3.05 3.65
4.27 5.52
5.49 7.98
7.92 15.41 15.23 24.37
(10.0) (12.0) (14.0) (18.1) (18.0) (26.2) (26.0) (50.6) (50.0) (80.0)
24.21 45.72
(79.4) (150.0)
2.29
(7.5)
5.08 [200˝]
3.97 4.75
5.60 7.24
7.19 10.45 10.38 20.17 19.93 31.86 31.52 59.41
(13.0) (15.6) (18.4) (23.8) (23.6) (34.3) (34.1) (66.2) (65.4) (104.5) (103.4) (194.9)
3.01
(9.9)
4.08 4.89
5.72 7.39
7.34 10.67 10.60 20.60 20.36 32.54 32.40 61.08
(13.4) (16.0) (18.8) (24.2) (24.1) (35.0) (34.8) (67.6) (66.8) (106.8) (106.3) (200.4)
3.08
(10.1)
6.35 [250˝]
4.98 5.96
7.02 9.07
9.01 13.09 13.00 25.25 24.95 39.86 39.49 74.36
(16.3) (19.6) (23.0) (29.8) (29.6) (42.9) (42.7) (82.8) (81.9) (130.8) (129.6) (244.0)
3.78
(12.4)
5.12 6.13
7.17 9.27
9.20 13.37 13.28 25.80 25.48 40.72 40.60 76.44
(16.8) (20.1) (23.5) (30.4) (30.2) (43.9) (43.6) (84.6) (83.6) (133.6) (133.2) (250.8)
3.87
(12.7)
7.62 [300˝]
5.99 7.17
8.44 10.91 10.82 15.73 15.62 30.34 29.97 47.87 47.47 89.30
(19.7) (23.5) (27.7) (35.8) (35.5) (51.6) (51.2) (99.5) (98.3) (157.1) (155.7) (293.0)
4.56
(15.0)
6.15 7.37
8.62 11.14 11.06 16.07 15.96 30.99 30.61 48.89 48.80 91.79
(20.2) (24.2) (28.3) (36.5) (36.3) (52.7) (52.4) (101.7) (100.4) (160.4) (160.1) (301.1)
4.65
(15.3)
12.70 [500˝]
8.00 9.58 11.28
(26.2) (31.4) (37.0)
10.01 11.99 14.12
(32.8) (39.3) (46.3)
63.42 119.19
(208.1) (391.0)
79.37 149.08
(260.4) (489.1)
6.10
(20.0)
7.64
(25.1)
8.22 9.85 11.52
(27.0) (32.3) (37.8)
10.29 12.33 14.42
(33.8) (40.5) (47.3)
65.19 122.51
(213.9) (401.9)
81.59 153.23
(267.7) (502.7)
6.23
(20.4)
7.81
(25.6)
15.24 [600˝]
12.03 14.40 16.96 21.93 21.73 31.58 31.35 60.85 60.09 95.89 95.32 178.96
(39.5) (47.2) (55.6) (71.9) (71.3) (103.6) (102.9) (199.6) (197.1) (314.6) (312.7) (587.1)
9.18
(30.1)
12.36 14.81 17.33 22.40 22.20 32.25 32.03 62.15 61.38 97.95 97.98 183.95
(40.6) (48.6) (56.9) (73.5) (72.8) (105.8) (105.1) (203.9) (201.4) (321.4) (321.5) (603.5)
9.38
(30.8)
17.78 [700˝]
14.04 16.82 19.80 25.60 25.36 36.86 36.60 71.02 70.13 111.90 111.27
(46.1) (55.2) (65.0) (84.0) (83.2) (120.9) (120.1) (233.0) (230.1) (367.1) (365.1)
-
10.72
(35.2)
14.43 17.23 20.23 26.15 25.91 37.65 37.38 72.54 71.64 114.30 114.38
(47.3) (56.5) (66.4) (85.8) (85.0) (123.5) (122.6) (238.0) (235.0) (375.0) (375.3)
-
10.96
(36.0)
20.32 [800˝]
16.06 19.23 22.64 29.27 29.00 42.14 41.84 81.19 80.17 127.91 127.23
(52.7) (63.1) (74.3) (96.0) (95.1) (138.3) (137.3) (266.4) (263.0) (419.7) (417.4)
-
12.27
(40.3)
16.50 19.77 23.13 29.90 29.62 43.05 42.74 82.93 81.89 130.65 130.77
(54.1) (64.9) (75.9) (98.1) (97.2) (141.2) (140.2) (272.1) (268.7) (428.6) (429.0)
-
12.53
(41.1)
18.07
(59.3)
20.08
(65.9)
-
13.81
(45.3)
15.35
(50.4)
18.57
(60.9)
20.64
(67.7)
-
14.11
(46.3)
15.68
(51.4)
1.78 [70˝]
ET-D75LE6
min. max.
1.35 1.62
(4.4) (5.3)
ET-D75LE10
min. max.
1.90 2.46
(6.2) (8.1)
2.54 [100˝]
1.96
(6.4)
2.34
(7.7)
2.76
(9.1)
3.55 5.17
(11.6) (17.0)
3.05 [120˝]
2.36
(7.7)
2.82
(9.3)
3.55
4.18 5.40
5.37 7.81
7.75 15.08 14.90 23.85
(11.6) (13.7) (17.7) (17.6) (25.6) (25.4) (49.5) (48.9) (78.2)
22.86 [900˝]
Lighting Console
If primary signal is disrupted, back-up
signal smoothly engages to maintain
image display
25.40 [1000˝]
CAT5e (STP) cable or higher
Multi-Unit Brightness Control “ON”
At the time when the projectors are installed (A)
At the time when the projectors are installed (A´)
Projector 2
Projector 1
Projector 1
Projector (PT-RZ12K Series)
Projector 2
Projector 1
Brightness
fluctuations
Time
Terminals
( B)
1
2
3
(A´ )
Projector 2
4
Images from
projector 1 and 2
( B´ )
5
6
6
P6-7
1.82
(6.0)
26.03
(85.4)
28.93
(94.9)
33.65
(110.4)
37.40
(122.7)
33.33 48.44
(109.4) (158.9)
37.05 53.84
(121.6) (176.6)
PT-RS11K (4:3 aspect ratio)
(A)
(B)
(C)
(D)
unit: meters (feet)
48.10 93.32
(157.8) (306.2)
53.45 103.71
(175.4) (340.3)
40.87 65.25
(134.1) (214.1)
51.12 81.60
(167.7) (267.7)
92.15 147.01
(302.3) (482.3
102.41 163.36
(336.0) (536.0)
147.17
(482.8)
163.56
(536.6)
PT-RZ12K Series
ET-D75LE90
(E)
(F)
min.
max.
min.
max.
If using lens other than the ET-D75LE90
(A)
(B)
(C)
(D)
(E)
(F)
SCREEN TOP
0.24
(0.8)
0.33
(1.1)
0.57
(1.9)
0.65
(2.1)
0.96
(3.1)
0.99
(3.2)
0.69
(2.3)
-0.04
(-0.1)
0.25
(0.8)
0.57
(1.9)
3.81
[150˝]
1.18
(3.9)
1.20
(3.9)
0.90
(2.9)
0.17
(0.6)
0.33
(1.1)
0.44
(1.5)
0.66
(2.2)
0.77
(2.5)
1.20
(3.9)
1.23
(4.0)
0.92
(3.0)
0.20
(0.7)
0.34
(1.1)
0.67
(2.2)
5.08
[200˝]
1.56
(5.1)
1.59
(5.2)
1.28
(4.2)
0.56
(1.8)
0.49
(1.6)
0.63
(2.1)
0.81
(2.7)
0.96
(3.1)
1.59
(5.2)
1.62
(5.3)
1.32
(4.3)
0.59
(1.9)
0.50
(1.6)
0.82
(2.7)
6.35
[250˝]
1.95
(6.4)
1.97
(6.5)
1.67
(5.5)
0.94
(3.1)
0.64
(2.1)
0.82
(2.7)
0.97
(3.2)
1.15
(3.8)
1.99
(6.5)
2.02
(6.6)
1.71
(5.6)
0.98
(3.2)
0.66
(2.2)
0.98
(3.2)
7.62
[300˝]
2.33
(7.6)
2.36
(7.7)
2.05
(6.7)
1.33
(4.4)
0.80
(2.6)
1.01
(3.3)
1.12
(3.7)
1.34
(4.4)
2.38
(7.8)
2.41
(7.9)
2.10
(6.9)
1.38
(4.5)
0.81
(2.7)
1.14
(3.7)
Early Warning Software ET-SWA100 (Optional)
8.89
[350˝]
2.72
(8.9)
2.74
(9.0)
2.44
(8.0)
1.71
(5.6)
0.95
(3.1)
1.21
(4.0)
1.27
(4.2)
1.53
(5.0)
2.77
(9.1)
2.80
(9.2)
2.50
(8.2)
1.77
(5.8)
0.97
(3.2)
1.29
(4.2)
Early Warning Software monitors the status of projectors and displays
connected to an intranet, and informs the operator when an
abnormality is detected or predicted, and when there are symptoms of
trouble. This minimizes downtime to provide more stable operation.
10.16
[400˝]
3.10
(10.2)
3.13
(10.3)
2.82
(9.3)
2.10
(6.9)
1.11
(3.6)
1.40
(4.6)
1.43
(4.7)
1.72
(5.6)
3.17
(10.4)
3.20
(10.5)
2.89
(9.5)
2.16
(7.1)
1.13
(3.7)
1.45
(4.8)
SCREEN TOP
12.70
[500˝]
3.87
(12.7)
3.90
(12.8)
3.59
(11.8)
2.87
(9.4)
1.41
(4.6)
1.78
(5.8)
1.74
(5.7)
2.10
(6.9)
3.95
(13.0)
3.98
(13.1)
3.68
(12.1)
2.95
(9.7)
1.44
(4.7)
1.77
(5.8)
SCREEN BOTTOM
15.24
[600˝]
4.64
(15.2)
4.67
(15.3)
4.36
(14.3)
3.64
(11.9)
1.72
(5.6)
2.16
(7.1)
2.05
(6.7)
2.48
(8.1)
4.74
(15.6)
4.77
(15.6)
4.46
(14.6)
3.74
(12.3)
1.76
(5.8)
2.08
(6.8)
PROJECTOR
SCREEN
SCREEN BOTTOM
PROJECTOR
If using the ET-D75LE90
SCREEN
Optional Accessories
ET-D75LE6
ET-D75LE10
ET-D75LE20
ET-D75LE30
ET-PKD520H
ET-UK20
Zoom lens
Zoom lens
Zoom lens
Zoom lens
Ceiling mount bracket
(for high ceiling)
Geometry Manager Pro Upgrade Kit
ET-CUK10
7
12
41.38
(135.8)
51.77
(169.8)
-0.06
(-0.2)
13
PT-RZ12K/RS11K
484 (19-1/16)
578 (22-3/4)
8. SDI IN 1 terminal
9. SDI IN 2 terminal
10. RGB 1 IN terminal
11. RGB 2 IN terminal
12. DVI-D IN terminal
13. HDMI IN terminal
14. DIGITAL LINK/LAN terminal
Auto Screen Adjustment Upgrade Kit
(except in the United States)
ET-D75LE40
ET-D75LE8
ET-D75LE50
ET-D75LE90
Zoom lens
Zoom lens
Fixed-focus lens
Fixed-focus lens
ET-SWA100 Series
ET-PKD520S
Early Warning Software
Ceiling mount bracket
(for low ceiling)
ET-YFB200G
14
270(10-5/8)
11
22.25
(73.0)
24.73
(81.1)
1.50
(4.9)
3.40 4.39
4.37 6.36
6.32 12.29 12.15 19.46 19.29 36.50
(11.2) (14.4) (14.3) (20.9) (20.7) (40.3) (39.9) (63.8) (63.3) (119.8)
0.67
(2.2)
*14 Combination of primary/secondary input terminals is fixed. Supported combinations are DVI-D (primary) and
HDMI (secondary) terminals, or SDI 1 (primary) and SDI 2 (secondary) terminals. The Backup Input Setting is
enabled only when the input signal to the primary and secondary terminals is the same.
Time
143.18
(469.8)
159.13
(522.1)
1.03
(3.4)
16.01 30.36
(52.5) (99.6)
14.90 14.77 21.46 21.31
(48.9) (48.5) (70.4) (69.9)
18.65 18.48 26.86 26.67
(61.2) (60.6) (88.1) (87.5)
10.10 16.19
(33.1) (53.1)
0.97
(3.2)
323.5(12-23/32)
10
195.5 (7-11/16)
Dimensions
9
90.21 143.92
(296.0) (472.2)
100.25 159.93
(328.9) (524.7)
5.24 10.21
(17.2) (33.5)
0.94
(3.1)
1. REMOTE 1 IN terminal
2. REMOTE 1 OUT terminal
3. REMOTE 2 IN terminal
4. SERIAL IN terminal
5. SERIAL OUT terminal
6. 3D SYNC 1 IN/OUT terminal
7. 3D SYNC 2 OUT terminal
8
32.63 47.42 47.09 91.36
(107.1) (155.6) (154.5) (299.7)
36.27 52.70 52.33 101.53
(119.0) (172.9) (171.7) (333.1)
40.01 63.87
(131.3) (209.5)
50.05 79.88
(164.2) (262.1)
3.64
(11.9)
3.05
[120˝]
Projector 2
Preset
brightness
(A)
40.51
(132.9)
50.68
(166.3)
ET-D75LE90
Diagonal
image size
Generous Connectivity
Brightness
Image from
projector 2
32.94
(108.1)
36.61
(120.1)
Various Lighting Equipment
After a certain time has passed (B´)
Brightness
Image from
projector 1
14.58 14.46 21.01 20.86
(47.8) (47.4) (68.9) (68.4)
18.25 18.09 26.29 26.11
(59.9) (59.4) (86.3) (85.7)
9.88 15.85
(32.4) (52.0)
ET-D75LE50
Dimension Definitions
Connect any source device to the PT-RZ12K Series via its array of
terminals including 3G-SDI, DIGITAL LINK, DVI-D, and HDMI.
After a certain time has passed (B)
25.48
(83.6)
28.33
(92.9)
5.13 9.99
(16.8) (32.8)
PT-RZ12K (16:10 aspect ratio)
Conventional Projector
Projector 1
21.64
(71.0)
24.06
(78.9)
3.56
(11.7)
ET-D75LE50
DMX512
Multi-Unit Brightness/Color Control
This function automatically corrects brightness and color fluctuations
that occur over time in individual projectors in a multi-screen system. Up
to eight projectors connected by a hub can be controlled increasing to a
maximum of 2,048 projectors with Multi Monitoring & Control Software.
unit: meters (feet)
Throw distance (A)
ET-D75LE20
ET-D75LE30
ET-D75LE40
ET-D75LE8
min. max.
min. max.
min. max.
min. max.
2.52 3.66
3.64 7.10
7.02 11.29 11.09 21.14
(8.3) (12.0) (11.9) (23.3) (23.0) (37.0) (36.4) (69.4)
10.16 [400˝]
Switch quickly
PT-RS11K (4:3 aspect ratio)
Throw distance (A)
ET-D75LE20
ET-D75LE30
ET-D75LE40
ET-D75LE8
min. max.
min. max.
min. max.
min. max.
2.46 3.58
3.56 6.94
6.87 11.05 10.78 20.56
(8.1) (11.7) (11.7) (22.8) (22.5) (36.3) (35.4) (67.5)
Diagonal
image size
ET-PFD510
ET-EMF330
ET-SFR330
ET-PKD520B
Frame
Replacement filter unit
Smoke cut filter
Projector mount
bracket
DIGITAL LINK
Switcher
ET-YFB100G
Digital Inter face
Box
725 (28-17/32)
740 (29-1/8)
unit: mm (inches)
7