SCAS0103E C11090-22B

R
ORCA2
Digital CCD camera C11090-22B
FEATURES
High resolution format
(1024 × 1024 pixels)
High quantum efficiency from UV to NIR
Low readout noise
(6 electrons rms. typ.)
Dual readout mode
(high-resolution and high-speed readout mode)
Programmable trigger signal output
Sub-array and binning readout mode
IEEE1394b interface
The ORCA2
2 has a specialty feature of low noise and highsensitivity. Maximum cooling down to -90 ˚C enables dark
current as low as 0.0012 electrons/pixel/second and the 1024
× 1024 pixels BT-CCD (Back-thinned CCD) provides 1M pixel
resolution and high quantum efficiency of over 90 % peak and
broad sensitivity from UV to NIR. This camera is especially
suitable for applications which require to detect faint light with
long exposure time and low noise.
APPLICATIONS
Luminescence and fluorescence imaging
High resolution video microscopy
Semiconductor imaging
X-ray applications
Neutron radiography
Scintillator readout
SYSTEM CONFIGURATION
SPECTRAL RESPONSE
* This is typical, not guaranteed.
Microscope
Computer
AC adapter
Video camera
Hose set
attachment
without joint
(C-mount)
A10788-04
Water circulator
Commercially
available
software
Standard
Option
Quantum efficiency (%)
ORCA2
2
Lens
100
Computer frame
grabber board
80
60
40
20
0
200
400
600
800
* Please contact your local Hamamatsu representative or distributor regarding actual configuration.
Wavelength (nm)
1000
1200
SPECIFICATIONS
Type number
C11090-22B
Hermetic vacuum-sealed air/water-cooled head *1
Camera head type
Back-thinned frame transfer CCD
Imaging device
1024 (H) × 1024 (V)
Effective number of pixels
13 μm (H) × 13 μm (V)
Cell size
13.3 mm (H) × 13.3 mm (V)
Effective area
Pixel clock rate
High-precision readout
312.5 kHz
High speed readout
5 MHz
Cooling method/
Forced-air cooled
at temperature control
temperature* 2
Water cooled * 3
at temperature control
- 65 ˚C stabilized (0 ˚C to +30 ˚C)
- 75 ˚C (Water temperature : +20 ˚C)
- 90 ˚C (Water temperature: lower than +10 ˚C)
at maximum cooling typ.
Readout noise* 4 (typ.)
6 electrons rms
Full well capacity (1×1)
80 000 electrons
Dark current
Forced-air cooled (- 65 ˚C)
0.0065 electron/pixel/s
(typ.)
Water cooled (- 75 ˚C)
0.0012 electron/pixel/s
Dynamic range* 5
13 333:1
A/D converter
16 bit
Analog gain
×1, ×4, ×18
High-precision readout
×1 to × 6
High speed readout
Exposure time* 6
Internal synchronous High-precision readout* 7
mode
High speed readout
3.53 s to 120 min (312.5 kHz)
307 ms to 120 min (5 MHz)
400 ms to 120 min
External synchronous High-precision readout
mode
High speed readout
20 ms to 120 min
2 × 2, 4 × 4, 8 × 8
Binning
Sub array readout
Every 8 lines (horizontal, vertical) size and position can be set
External trigger mode* 8
Edge trigger, Level trigger, Start trigger, Synchronous readout trigger
External synchronization function
Trigger readout delay, Thin out of encoder pulses
Trigger output* 8
Exposure timing output, Programmable timing output (Delay and pulse length are variable.), Trigger ready output
Interface
IEEE1394b
Lens mount
C-mount
Input power supply
AC 100 V to 240 V, 50 Hz / 60 Hz
Power consumption
Approx. 120 VA
Ambient storage temperature
-10 ˚C to + 50 ˚C
Ambient operating temperature
0 ˚C to + 40 ˚C
Performance guaranteed temperature
0 ˚C to + 30 ˚C
Ambient operating humidity
70 % max. (with no condensation)
Binning
Frame rate
(frames/s)
1×1
2×2
4×4
8×8
High-precision readout
0.28
0.55
1.04
1.88
High speed readout
3.15
4.85
6.64
8.13
DIMENSIONAL OUTLINES
(Unit : mm)
Camera (Approx. 3.5 kg)
111±1
215±2
55.5±1
110±1
25.5±1
156±0.5
4-M4 D=4
76±0.5
1-32UN C-mount D=5
*1: The hermetic sealed head maintains a high degree of vacuum, 10-8 Torr, without re-evacuation.
*2: Thermal electric cooling +air or water cooling (Change with DIP SW). The cooling temperature may
not reach to this temperature; it depends on the operation condition.
*3: Water volume 0.5 liter/min.
*4: High precision mode
*5: Calculated from the ratio of the full well capacity and the readout noise.
*6: Image smearing may appear when the exposure time is short.
*7: Using DCAM-API, the value is 400 ms to 6.45 s.
*8: C-MOS 3.3 V with reversible polarity.
OPTIONS
OPTIONS
• IEEE1394b cable 9P-9P 4.5 m : A12344-05
• Hose set without joint : A10788-04
• External trigger cable SMA-BNC 5 m : A12106-05
• External trigger cable SMA-SMA 5 m : A12107-05
• Base plate common for ImagEM X2 chassis :
R
A12263-01
★ ORCA is registered trademark of Hamamatsu Photonics K.K. (France, Germany, Japan, U.K., U.S.A.)
★ Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers.
●
●
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult your local sales representative.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications and external appearance are subject to change without notice.
© 2015 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Systems Division
812 Joko-cho, Higashi-ku, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail: [email protected]
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J 08807, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH.: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-265-8 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court,10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, UK, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected]
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]
Cat. No. SCAS0103E02
MAR/2015 HPK
Created in Japan