FINAL PRODUCT/PROCESS CHANGE NOTIFICATION #16950 Generic Copy Issue Date: 21-Dec-2012 TITLE: MAX/ NCP 803, 809, 810 Device Families Qualification at Gresham Wafer Fab PROPOSED FIRST SHIP DATE: 21-Mar-2013 AFFECTED CHANGE CATEGORY(S): Wafer Fab Location FOR ANY QUESTIONS CONCERNING THIS NOTIFICATION: Contact your local ON Semiconductor Sales Office or [email protected]. SAMPLES: Contact your local ON Semiconductor Sales Office or [email protected] ADDITIONAL RELIABILITY DATA: Available Contact your local ON Semiconductor Sales Office or [email protected]. NOTIFICATION TYPE: Final Product/Process Change Notification (FPCN) Final change notification sent to customers. implementation of the change. FPCNs are issued at least 90 days prior to ON Semiconductor will consider this change approved unless specific conditions of acceptance are provided in writing within 30 days of receipt of this notice. To do so, contact <[email protected]>. DESCRIPTION AND PURPOSE: ON Semiconductor is pleased to announce the qualification of the MAX/ NCP 803, 309 & 810 families in ON Semiconductor’s Gresham wafer fab facility on the ONC25 technology. These device families are currently produced at ON Semiconductor’s Aizu wafer fab facility located in Aizu, Japan. Due to the announcement of the Aizu fab closure, these device families have been redesigned using the ON Semiconductor ONC25 process and will be produced from ON Semiconductor’s Gresham wafer fabrication facility located in Gresham, Oregon. Upon expiration (or approval) of this Final PCN, devices may be supplied by either wafer fab. The Gresham wafer fab is compliant to ISO9001:2008, ISO/TS16949:2009, and ISO14001:2004. The MAX/ NCP 80x families currently run on the Aizu ACMOS2 process. These families have now been successfully qualified at the Gresham wafer fab on the ONC25 technology. Device performance is the same for Aizu and Gresham-sourced devices. The MAX/ NCP 80x families will continue to be assembled and tested in existing, qualified locations. No changes to packaging will occur as a result of this fab qualification. Issue Date: 21-Dec-2012 Rev. 06-Jan-2010 Page 1 of 3 FINAL PRODUCT/PROCESS CHANGE NOTIFICATION #16950 RELIABILITY DATA SUMMARY: Reliability Test Results: The Gresham-sourced MAX/ NCP 80x families have been qualified based on the following test results: Test Conditions Results ELFR Ta=+125C; 48hrs 0/800 1 lot High Temp Op Life Ta= +125C; 504hrs, 1008hrs 0/80 3 lots High Temp Storage Ta=150C; 504hrs, 1008hrs 0/80 3 lots Preconditioning + Temperature Cycling MSL1 @ 260C; -65C/ +150C; Air to Air; 500cy, 100Cy 0/80 3 lots Preconditioning + Highly Accelerated Stress Test MSL @ 260C, 131C/ 85% RH/ bias 96hrs 0/80 3 lots Preconditioning + Unbiased Highly Accelerated Stress Test MSL @ 260C, 131C/ 85% RH/ no bias 96hrs 0/80 3 lots ESD HBM MM 2000V Pass 200V Pass LU JEDEC JESD78 +/- 200mA Pass ELECTRICAL CHARACTERISTIC SUMMARY: Electrical characterization test data has been obtained on Gresham MAX/ NCP 80x material. No significant changes in part performance as compared to the existing Aizu-sourced product were observed. Cpk’s of all critical parameters are greater than 1.67. Data may be provided upon request. CHANGED PART IDENTIFICATION: Devices with date codes of 2013 work week 11 or later may be sourced from either wafer Gresham or Aizu fab. Issue Date: 21-Dec-2012 Rev. 06-Jan-2010 Page 2 of 3 FINAL PRODUCT/PROCESS CHANGE NOTIFICATION #16950 List of affected General Parts: MAX809HTRG MAX809JTRG MAX809MTRGH MAX809RTRG MAX809SN120T1G MAX809SN160T1G MAX809SN232T1G MAX809SN490T1G MAX809SQ120T1G MAX809SQ232T1G MAX809SQ263T1G MAX809SQ308T1G MAX809SQ400T1G MAX809SQ438T1G MAX809SQ463T1G MAX809TTRGH MAX809TTRG MAX809LTRG MAX809MTRG MAX809SN293D1T1G MAX809SN293D2T1G MAX809SN293D3T1G MAX809SQ293D1T1G MAX809SQ293D2T1G MAX809SQ293D3T1G MAX809SQ293T1G MAX809STRGH MAX809STRG Issue Date: 21-Dec-2012 MAX803SQ120T1G MAX803SQ293T1G MAX803SQ308T1G MAX803SQ438T1G MAX803SQ463T1G MAX803SQ263T1G MAX803SQ293D2T1G MAX803SQ293D1T1G MAX803SQ293D3T1G MAX803SQ308D2T1G NCP803SN120T1G NCP803SN160T1G NCP803SN232T1G NCP803SN293T1G NCP803SN293T3G NCP803SN308T1G NCP803SN400T1G NCP803SN438T1G NCP803SN463T1G NCP803SN463D1T1G NCP803SN263T1G NCP803SN293D2T1G NCP803SN293D1T1G NCP803SN293D3T1G Rev. 06-Jan-2010 MAX810LTRG MAX810MTRG MAX810RTRG MAX810SN120T1G MAX810SQ120T1G MAX810SQ263T1G MAX810SQ293T1G MAX810SQ438T1G MAX810SQ463T1G MAX810STRG MAX810TTRG MAX810SN293D1T1G MAX810SN293D2T1G MAX810SN293D3T1G MAX810SQ293D1T1G MAX810SQ293D2T1G MAX810SQ293D3T1G Page 3 of 3