&) 3 SOT1289 CFP15; Reel pack, SMD, 7" Q4/T2 turned product orientation Orderable part number ending ,146 or X Ordering code (12NC) ending 146 Rev. 1 — 23 January 2015 Packing information 1. Packing method Printed plano box Barcode label Reel Tape QA Seal Preprinted ESD warning Circular sprocket holes opposite the label side of reel PQ-label (permanent) Cover tape Carrier tape 001aak603 Fig 1. Reel pack for SMD SOT1289 NXP Semiconductors CFP15; Reel pack, SMD, 7" Q4/T2 turned product orientation Orderable part number ending ,146 or X Ordering code (12NC) ending 146 Table 1. Dimensions and quantities Reel dimensions d w (mm) [1] SPQ/PQ (pcs) [2][3] Reels per box Outer box dimensions l w h (mm) 180 12 1500 1 186 187 20 [1] d = reel diameter; w = tape width. [2] Packing quantity dependent on specific product type. View ordering and availability details at NXP order portal, or contact your local NXP representative. [3] ‘X’ shown in the descriptive title of the document indicates that another ordering code of 139 for a 13-inch reel, 5000 pcs/reel is available. 2. Product orientation 47 47 SLQ 47 47 DDD DDD The four carrier tape pocket quadrants. Fig 2. Pin 1 is in quadrant 4. Product orientation in carrier tape 3. Carrier tape dimensions 4 mm W K0 A0 B0 P1 T direction of feed Fig 3. 001aao148 Carrier tape dimensions Table 2. Carrier tape dimensions In accordance with IEC 60286-3. SOT1289_146 Packing information A0 (mm) B0 (mm) K0 (mm) T (mm) P1 (mm) W (mm) 4.6 0.1 6.8 0.1 1.1 0.1 0.3 0.05 8.00 0.1 12 0.3 All information provided in this document is subject to legal disclaimers. Rev. 1 — 23 January 2015 © NXP Semiconductors N.V. 2015. All rights reserved. 2 of 5 SOT1289 NXP Semiconductors CFP15; Reel pack, SMD, 7" Q4/T2 turned product orientation Orderable part number ending ,146 or X Ordering code (12NC) ending 146 4. Reel dimensions A Z W2 B ØC ØD detail Z 001aao149 Fig 4. Schematic view of reel Table 3. Reel dimensions In accordance with IEC 60286-3. SOT1289_146 Packing information A [nom] (mm) W2 [max] (mm) B [min] (mm) C [min] (mm) D [min] (mm) 180 14.4 1.5 12.8 20.2 All information provided in this document is subject to legal disclaimers. Rev. 1 — 23 January 2015 © NXP Semiconductors N.V. 2015. All rights reserved. 3 of 5 SOT1289 NXP Semiconductors CFP15; Reel pack, SMD, 7" Q4/T2 turned product orientation Orderable part number ending ,146 or X Ordering code (12NC) ending 146 5. Barcode label NXP -ASSEMBLED IN >COUNTRY< (30P)TYPE HALOGEN FREE (1T)LOT (Q)QTY EU/CN RoHS compliant (9D)DATE (1P)CODENO 001aak715 Fig 5. Table 4. SOT1289_146 Packing information Example of typical reel information barcode label Barcode label dimensions Box barcode label l w (mm) Reel barcode label l w (mm) 100 75 36 75 All information provided in this document is subject to legal disclaimers. Rev. 1 — 23 January 2015 © NXP Semiconductors N.V. 2015. All rights reserved. 4 of 5 SOT1289 NXP Semiconductors CFP15; Reel pack, SMD, 7" Q4/T2 turned product orientation Orderable part number ending ,146 or X Ordering code (12NC) ending 146 6. Revision history Table 5. Revision history Document ID Release date Packing document status Change notice Supersedes SOT1289_146 20150123 Packing information - - Limited warranty and liability © NXP Semiconductors N.V. 2015. Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 23 January 2015 Document identifier: SOT1289_146 All rights reserved.