Tape reel SMD; standard product orientation 12NC ending 115

SO
8
SOT96-1
Tape reel SMD; standard product orientation 12NC ending 115
Rev. 1 — 23 November 2012
Packing information
1. Packing method
Printed plano box
Barcode label
Reel
Tape
Barcode label
Circular sprocket holes opposite the
label side of reel
QA Seal
Cover tape
Carrier tape
msc074
Fig 1.
Table 1.
Reel pack for SMD
Packing information
Package
version
12NC
ending
Reel dimensions
d x w (mm) [1]
SPQ/PQ
(pcs)
Reels
per box
Outer box dimensions
l x w x h (mm)
SOT96-1
115
180 x 12
1000
1
190 x 190 x 26
[1]
d = reel diameter; w = tape width.
SOT96-1
NXP Semiconductors
Tape reel SMD; standard product orientation 12NC ending 115
2. Product orientation
circular
SOT89
SOT96, 163, 530
pin 1
SOT223
SOT391
SOT404, 426,
427, 428
direction of feed
circular
SOT669,
1023
SOT409
SOT482B/C
SOT538A
SOT559A,
632A, 649A
SOT596A
pin 1
mgu986
direction of feed
Fig 2.
SOT96-1_115
Packing information
Product orientation in carrier tape
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 23 November 2012
© NXP B.V. 2012. All rights reserved.
2 of 3
SOT96-1
NXP Semiconductors
Tape reel SMD; standard product orientation 12NC ending 115
3. Carrier tape dimensions
4
W
K0
A0
B0
P1
mdb579
direction of feed
Fig 3.
Carrier tape dimensions
Table 2.
Carrier tape dimensions
In accordance with IEC 60286-3.
A0 (mm)
B0 (mm)
K0 (mm)
T (mm)
P1 (mm)
W (mm)
6.7
5.4
1.8
-
8.0
12
Limited warranty and liability
© NXP B.V. 2012.
Information in this document is believed to be accurate and reliable. However, NXP
Semiconductors does not give any representations or warranties, expressed or implied, as
to the accuracy or completeness of such information and shall have no liability for the
consequences of use of such information.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 23 November 2012
Document identifier: SOT96-1_115
All rights reserved.