Product Overview MC10ELT25: Translator, Differential ECL to TTL For complete documentation, see the data sheet Product Description The MC10ELT/100ELT25 is a differential ECL to TTL translator. Because ECL levels are used, a +5 V, -5.2 V (or -4.5 V) and ground are required. The small outline 8-lead package and the single gate of the ELT25 makes it ideal for those applications where space, performance and low power are at a premium. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The 100 Series contains temperature compensation. Features • • • • • • • • • • 2.6ns Typical Propagation Delay 100 MHz FMAX CLK 24 mA TTL Outputs Flow Through Pinouts ESD Protection: >1 KV HBM, > 400 V MM Operating Range: VCC= 4.5 V to 5.5 V with GND= 0 V; VEE= -4.2 V to -5.7 V with GND= 0 V Internal Input Pulldown Resistors Q Output will default HIGH with inputs open or < 1.3 V Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Moisture Sensitivity Level 1 For Additional Information, see Application Note AND8003/D For more features, see the data sheet Part Electrical Specifications Product Compliance Status Channels Input Level Output Level VCC Typ (V) fMax Typ (MHz) tpd Typ (ns) tR & tF Max (ps) Package Type MC10ELT25DG Pb-free Active 1 ECL TTL 5 100 2.6 2300 SOIC-8 Active 1 ECL TTL 5 100 2.6 2300 SOIC-8 Active 1 ECL TTL 5 100 2.6 2300 TSSOP-8 Halide free MC10ELT25DR2G Pb-free Halide free MC10ELT25DTG Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016