Product Change Notification Product Change Notification Number: WC124807 Notification Date: February 11, 2013 Title: Die Revision Change for ATxmega128A3U Product Identification: ATxmega128A3U-AU ATxmega128A3U-AUR ATxmega128A3U-MH ATxmega128A3U-MHR Reason for Change: Material / Composition Design / Firmware Manufacturing Location Processing / Manufacturing Logistics Quality / Reliability Change Description: This notification is to advice our customers that Atmel will introduce new revisions of the AVR microcontroller products listed above. The new revisions are package and pin compatible to the existing revisions. They are introduced in order to remove errata and enhance the product. Actual devices changes are minimal, but for your reference they are listed here. Samples are only available in bulk and can be ordered through Atmel Sample Centre by logging on to https://samples.atmel.com/scripts/samplecenter.dll?atmel?cmd=menu Specific ordering codes for new die revision samples only are shown in the table below, and are available for sample orders only until the proposed first shipment date. For all production orders, only standard existing ordering codes will be accepted. Part number Ordering code for samples ATxmega128A3U-AU ATxmega128A3U-AUK ATxmega128A3U-MH ATxmega128A3U-MHK Note that the K in sample ordering codes will not be marked on the package. Changes The new revision change the following: • • • Reduced current consumption in Active and Idle modes Bonding wire material has changed from gold to copper The I/O pins comply with the JEDEC LVTTL and LVCMOS specification and the high- and low level input and output voltage limits reflect or exceed this specification. See Appendix 1 for more details on changes in electrical parameters. Identification Method to Distinguish Change: For packages where space allows for die ID to be part of marking, new revision material is identified as 35966I. Qualification Data: Available Will be available (mm/dd/yr): Not Applicable Samples: Available Will be available (mm/dd/yr): Not Applicable Atmel Norway • Vestre Rosten 79 7075 Tiller • NORWAY QF-8004 Rev. 09 09/03/2012 Page 1 of 3 PCN NO. WC124807 Page 2 of 3 Quantifiable Impact on Quality & Reliability: None Proposed First Ship Date*: May 8, 2013 *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. Company: Name: Title: Date: Email Address: Location: Comments: Atmel Norway • Vestre Rosten 79 7075 Tiller • NORWAY QF-8004 Rev. 09 09/03/2012 PCN NO. WC124807 Page 3 of 3 Appendix 1: Change Description Details Reduced current consumption in Active and Idle modes The table below lists the typical and maximum current consumption in the existing and new revision. Existing revision Parameter Units Min 32kHz, Ext. Clk Active power consumption 1MHz, Ext. Clk 2MHz, Ext. Clk 32MHz, Ext. Clk 32kHz, Ext. Clk 1MHz, Ext. Clk Idle power consumption 2MHz, Ext. Clk Typ Max Min Max VCC = 1.8V 120 60 VCC = 3.0V 270 140 VCC = 1.8V 350 280 VCC = 3.0V 697 570 VCC = 1.8V 658 700 500 600 1.1 1.4 1.0 1.4 10.6 15 10.3 15 VCC = 3.0V μA VCC = 1.8V 4.3 3.5 VCC = 3.0V 4.8 4.5 VCC = 1.8V 78 75 VCC = 3.0V 150 140 VCC = 1.8V 150 350 150 250 600 280 450 4.7 7.0 4.4 7.0 T = 25°C 0.1 1.0 0.1 1.0 1.8 5.0 1.6 5.0 1.3 3.0 1.2 3.0 3.1 7.0 2.8 7.0 VCC = 3.0V RTC from ULP clock, WDT and sampled BOD enabled, T = 25°C Power-save power RTC from 1.024kHz low consumption power 32.768kHz TOSC, T = 25°C RTC from low power 32.768kHz TOSC, T = 25°C Current through RESET pin substracted VCC = 1.8V 1.2 1.2 VCC = 3.0V 1.3 1.3 VCC = 1.8V 0.6 2.0 0.5 2.0 VCC = 3.0V 0.7 2.0 0.7 2.0 VCC = 1.8V 0.8 2.0 0.9 3.0 VCC = 3.0V 1.0 3.0 1.2 3.5 VCC = 3.0V 250 Atmel Norway • Vestre Rosten 79 7075 Tiller • NORWAY 150 mA μA 290 WDT and sampled BOD enabled, T = 85°C QF-8004 Rev. 09 09/03/2012 Typ 32MHz, Ext. Clk T = 85°C Power-down power WDT and sampled BOD consumption enabled, T = 25°C Reset power consumption New revision Condition mA μA