PCN / EOL Notification ® Product Change Notification Number: RC083701 Date: September 10, 2008 Title: AT91SAM7S32 Revision and Ordering Code Change Product Identification: Current Part Number AT91SAM7S32-AU-001 AT91SAM7S32-AU-999 AT91SAM7S32-MU AT91SAM7S32-MU-999 Reason for Change: New Part Number AT91SAM7S32B-AU AT91SAM7S32B-AU-999 AT91SAM7S32B-MU AT91SAM7S32B-MU-999 Design Manufacturing Location Processing Quality/Reliability Logistics Material Change Description: The following erratum has been corrected: - PIO: Leakage on PA17 – PA20 - JTAG: Recommendation for TDI Pin - MCK: Limited Master Clock Frequency Ranges The errata is documented in the AT91SAM7S full datasheet dated 03-Dec-07, reference 6175H in section: 40.13.5.1 & 40.14.3.1, 40.13.2.1 and 40.13.3.1 Identification Method to Distinguish Change: Ordering code, as stated above in the product identification paragraph. Marketing Revision on the topside marking will be incremented from A to B. Chip-ID: AT91SAM7S32 Revision B chip ID is: 0x27080341 Top side marking: Commercial Reference Package Type Definition AT91SAM7S32 AU Date Code (Year & Week) YYWW B ABCCCC ARM Marketing Revision Lot Number ATMEL Rousset • Zone industrielle 13106 ROUSSET Cedex • France Page 1 of 2 PCN NO. RC083701 Page 2 of 2 Qualification Data: Samples: available available will be available will be available not applicable not applicable Quantifiable Impact on Quality & Reliability: None Proposed First Ship Date*: December 8, 2008 Last Time Buy Date: March 8, 2009 Last Ship Date: September 8, 2009 * All orders placed after the notification date are non-cancellable and non-returnable (NCNR). Atmel Contact: [email protected] Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. All correspondence must be sent to the Quality Contact e-mail address listed above. Information provided herein is in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel's Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. ATMEL Rousset • Zone industrielle 13106 ROUSSET Cedex • France CPQ-2005 Rev. 22