PCN / EOL Notification ® Product Change Notification Number: RC090302 Date*: May 18, 2009 Title: AT91SAM7XC Revision and Ordering Code Change Product Identification: Current Part Number AT91SAM7XC128-AU AT91SAM7XC128-AU-999 AT91SAM7XC128-CU AT91SAM7XC128-CU-999 AT91SAM7XC256-AU AT91SAM7XC256-AU-999 AT91SAM7XC256-CU AT91SAM7XC256-CU-999 Reason for Change: New Part Number AT91SAM7XC128B-AU AT91SAM7XC128B-AU-999 AT91SAM7XC128B-CU AT91SAM7XC128B-CU-999 AT91SAM7XC256B-AU AT91SAM7XC256B-AU-999 AT91SAM7XC256B-CU AT91SAM7XC256B-CU-999 Design Manufacturing Location Processing Quality/Reliability Logistics Material Change Description: The following errata have been corrected: • PIO leakage on PB27-PB30 The errata is documented in the AT91SAM7XC full datasheet dated 27-Jan-09, reference 6209F in section 44.2.4.1 A new errata has been identified on the SPI. • In case the SPI is reset by software (SWRST in SPI control register) the command should be written twice. The errata is documented in the AT91SAM7XC full datasheet dated 27-Jan-09, reference 6209F in section 44.4.7.7 The datasheet can be found on the Atmel WEB page in the ARM Microcontroller product section. Identification Method to Distinguish Change: Ordering code, as stated above in the product identification paragraph. Marketing Revision on the topside marking will be incremented from A to B. Chip-ID: Part Number AT91SAM7XC128B AT91SAM7XC256B Chip ID 0x271A 0740 0x271B 0940 ATMEL Rousset • Zone industrielle 13106 ROUSSET Cedex • France CPQ-2005 Rev. 23 Page 1 of 2 PCN NO. RC090302 Page 2 of 2 Top side marking: Commercial Reference Package Type Definition AT91SAM7XC256 AU Date Code (Year & Week) YYWW B ABCCCC ARM Marketing Revision Lot Number Qualification Data: Samples: available available not applicable not applicable Quantifiable Impact on Quality & Reliability: None Estimated First Ship Date*: July 1, 2009 Last Time Buy Date: November 18, 2009 Last Ship Date: May 18, 2010 * All orders placed after the notification date are non-cancellable and non-returnable (NCNR). Atmel Contact: [email protected] Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. All correspondence must be sent to the Quality Contact e-mail address listed above. Information provided herein is in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel's Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or non-infringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. ATMEL Rousset • Zone industrielle 13106 ROUSSET Cedex • France CPQ-2005 Rev. 23