Product Overview NCN8026: Smart Card Interface, Low Power For complete documentation, see the data sheet Product Description The NCN8026A is a compact and cost-effective single SIM and smart card interface IC. It can be used with 1.8 V, 3 V and 5 V IC cards. The card VCC supply is provided by a built-in very low drop-out and low noise Regulator. The NCN8026A offers enhanced performances with low VCC output ripple under load-transient conditions, very low shutdown current and 1.8 V-to-5 V logic compatibility. This device is fully compatible with the ISO 7816-3, EMV 4.2, UICC and related standards including STB standards (Nagravision, Irdeto, Conax...). It satisfies the requirements specifying conditional access into Set-Top-Boxes (STB) or Conditional Access Modules (CAM). This smart card interface IC is available in a QFN-24 package providing all the industry-standard features usually required for STB smart card interface. Features • Single IC Card Interface • Fully Compatible with ISO7816-3, EMV4.3, UICC and Related Standards Including STB Standards (Nagravision, Conax, Irdeto...) • Three Bidirectional Buffered I/O Level Shifters (C4, C7 and C8) • 1.8 V, 3 V or 5 V ±5 % Regulated Card Power Supply with ICC ? 80 mA and Low VCC Ripple • Regulator Power Supply: VDDP = 2.7 V to 5.5 V (@ 1.8 V), 3 V to 5.5 V (@ 3 V) and 4.85 V to 5.5 V (@ 5 V) • Independent Power Supply range on Controller Interface such as VDD = 1.6 V to 5.5 V • Handles Class A, B and C Smart Cards • Support up to 27 MHz input Clock with Internal Division Ratio 1/1, 1/2, 1/4 and 1/8 through CLKDIV1 and CLKDIV2 • HBM (Human Body Model) ESD Protection on Card Pins up to +8 kV • Activation / Deactivation Sequences (ISO7816 Sequencer) For more features, see the data sheet Applications End Products • Pay TV, Set Top Box Decoder with Conditional Access and Pay-per-View • Conditional Access Module (CAM / CAS) • SIM card interface applications (UICC / USIM) • Electronic Payment and Identification • Set Top Boxes • Point Of Sales and Transaction Terminals Part Electrical Specifications Product Compliance Status VCC Min (V) VCC Max (V) IT Typ (mA) II(standby) Max (µA) fClock Max (MHz) Package Type NCN8026AMNTXG Pb-free Active 1.6 5.5 1 3 27 QFN-24 Halide free Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016