Product Overview NLSX3012: 2-Bit 100 Mbps Configurable Dual-Supply Level Translator For complete documentation, see the data sheet Product Description The NLSX3012 is a 2 bit configurable dual-supply bidirectional level translator without a direction control pin. The I/O Vcc minus and I/O VL minus ports are designed to track two different power supply rails, Vcc and VL respectively. The VCC supply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to VCC minus 0.4V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCC side, and higher voltage logic signals on the VL side to be translated into lower voltage logic signals on the Vcc side. Both I/O ports are auto sensing; requiring no direction pin. The Output Enable input, when Low, disables both I/O ports by putting them in 3 state. This significantly reduces the supply currents from both Vcc and VL. The EN signal is designed to track VL. Features Benefits • Wide Operating Range • Allows for ease of integration of differing voltage levels 0.9V to 4.5V • Good for differential signaling. • Allows for voltage higher than Vcc on the input. • Low Bit to Bit Skew • Overvoltage Tolerant Enable and I/O pins. Applications End Products • Mobile Phones, PDAs, MP3 players • PC and Laptops Part Electrical Specifications Product Compliance Status Channels Input Level VCC Min (V) VCC Max (V) tpd Max (ns) IO Max (mA) Package Type NLSX3012DMR2G Pb-free Active 2 CMOS 1.3 4.5 7.2 0.02 Micro8™ Active 2 CMOS 1.3 4.5 7.2 0.02 SOIC-8 Active 2 CMOS 1.3 4.5 7.2 0.02 UDFN-8 Halide free NLSX3012DR2G Pb-free Halide free NLSX3012MUTAG Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016