Product Overview NLSX3013: 8-Bit 100 Mbps Configurable Dual-Supply Level Translator For complete documentation, see the data sheet Product Description The NLSX3013 is a 8-bit configurable dual-supply bidirectional level translator without a direction control pin. The I/O VCC and I/O VL ports are designed to track two different power supply rails, VCC and VL respectively. The VCC supply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC minus 0.4)V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCC side, and vice versa. Both I/O ports are auto sensing; thus, no direction pin is required. The Output Enable (EN) input, when Low, disables both I/O ports by putting them in 3-state. This significantly reduces the supply currents from both VCC and VL. The EN signal is designed to track VL. Features Benefits • Wide Voltage Operating Range • High-Speed with 100 Mb/s Guaranteed Date Rate for VL > 1.8V • Low Bit-to-Bit Skew • Overvoltage Tolerant Enable and I/O Pins • Non-preferential Powerup Sequencing • Small packaging: 2.03 mm x 2.54 mm 20 Pin Flip-Chip • This is a Pb-Free Device Applications • Allows for translation from voltage ranges of 0.9 V to 4.5V End Products • Handheld Battery powered devices operating at differing voltages • PDA, Cell Phones, Notebook, MP3 Players, White Goods • PC and Laptops Part Electrical Specifications Product NLSX3013BFCT1G Compliance Status Channels Input Level VCC Min (V) VCC Max (V) tpd Max (ns) IO Max (mA) Package Type Pb-free Active 8 CMOS 1.3 4.5 6.5 0.02 Flip-Chip-20 Active 8 CMOS 1.3 4.5 6 0.02 Flip-Chip-20 Halide free NLSX3013FCT1G Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016