Product Overview NLSX5002: 2-Bit 100 Mbps Configurable Dual-Supply Level Translator For complete documentation, see the data sheet Product Description The NLSX5002 is a 2-bit configurable dualsupply autosensing bidirectional level translator that does not require a direction control pin. The I/O VCC and I/O VLports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and the VL supply rails are configurable from 0.9 V to 4.5 V. This allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltage on the VCC side, and vice versa. The NLSX5002 offers the feature that the values of the VCC and VL supplies are independent.Design flexibility is maximized because VL can be set to a value either greater than or less than the VCC supply. In contrast, the majority of competitive auto sense translators have a restriction that the value of the VL supply must be equal to less than VCC0.4 V. The NLSX5002 has high output current capability, which allows the translator to drive high capacitive loads such as most high frequency EMI filters. Another feature of the NLSX5002 is that each I/O_VLn and I/O_VCCn channel can function as either an input or an output.An Output Enable (EN) input is available to reduce the power consumption. The EN pin can be used to disable both I/O ports by putting them in 3-state which significantly reduces the supply current from both VCC and VL. The EN signal is referenced to the VL supply. Features • Wide VCC, VL Operating Range: 0.9 V to 4.5 V • VL and VCC are independent VL may be greater than, equal to, or less than VCC • HighSpeed with 140 Mb/s Guaranteed Date Rate for VCC, VL > 1.8 V • Low BittoBit Skew • Overvoltage Tolerant Enable and I/O Pins • NonPreferential PowerUp Sequencing • PowerOff Protection • Small Packaging: UQFN8, 1.4 mm x 1.2 mm, 0.4 mm Pitch • These Devices are PbFree and are RoHS Compliant Part Electrical Specifications Product Compliance Status Channels Input Level VCC Min (V) VCC Max (V) tpd Max (ns) IO Max (mA) Package Type NLSX5002BMUTCG Pb-free Active 2 CMOS 0.9 4.5 13 0.02 UQFN-8 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016