Supertex inc. DN3535 N-Channel Depletion-Mode Vertical DMOS FETs Features ►► ►► ►► ►► ►► ►► General Description High input impedance Low input capacitance Fast switching speeds Low on-resistance Free from secondary breakdown Low input and output leakage This low threshold depletion-mode (normally-on) transistor utilizes an advanced vertical DMOS structure and Supertex’s well-proven silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Applications ►► ►► ►► ►► ►► ►► ►► Normally-on switches Solid state relays Converters Linear amplifiers Constant current sources Power supply circuits Telecom Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Product Summary Ordering Information Part Number DN3535N8-G Package Option TO-243AA (SOT-89) Packing 2000/Reel RDS(ON) BVDSX/BVDGX 350V -G denotes a lead (Pb)-free / RoHS compliant package. Contact factory for Wafer / Die availablity. Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant. IDSS (max) (min) 10Ω 200mA Pin Configuration Absolute Maximum Ratings Parameter Value Drain-to-source voltage BVDSX Drain-to-gate voltage BVDGX Gate-to-source voltage ±20V Operating and storage temperature -55OC to +150OC Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. DRAIN SOURCE DRAIN GATE TO-243AA (SOT-89) Product Marking DN5SW W = Code for week sealed = “Green” Packaging Package may or may not include the following marks: Si or Typical Thermal Resistance Package TO-243AA (SOT-89) TO-243AA (SOT-89) θja 133OC/W‡ Notes: ‡ Mounted on FR4 board, 25mm x 25mm x 1.57mm. Doc.# DSFP-DN3535 A062713 Supertex inc. www.supertex.com DN3535 Thermal Characteristics Package ID Power Dissipation (continuous)† ID (pulsed) @TA = 25OC IDR† IDRM 230mA 500mA 1.6W‡ 230mA 500mA TO-243AA Notes: † ID (continuous) is limited by max rated Tj. ‡ Mounted on FR4 board, 25mm x 25mm x 1.57mm. Electrical Characteristics (T A = 25OC unless otherwise specified) Sym Parameter BVDSS Drain-to-source breakdown voltage 350 - - V VGS = -5.0V, ID = 1.0µA VGS(OFF) Gate-to-source off voltage -1.5 - -3.5 V VDS = 15V, ID = 10µA Change in VGS(OFF) with temperature - - -4.5 mV/OC VDS = 15V, ID = 10µA Gate body leakage current - - 100 nA VGS = ±20V, VDS = 0V - - 1.0 µA VDS = Max rating, VGS = -5.0V - - 1.0 mA VDS = 0.8 Max Rating, VGS = -5.0V, TA = 125OC ΔVGS(OFF) IGSS ID(OFF) Min Drain-to-source leakage current Saturated drain-to-source current IDSS RDS(ON) ΔRDS(ON) Typ Max Units Conditions 200 - - mA Static drain-to-source on-state resistance VGS = 0V, VDS = 15V - - 10 Ω VGS = 0V, ID = 150mA Change in RDS(ON) with temperature - - 1.1 %/OC VGS = 0V, ID = 150mA 200 - - mmho VDS = 10V, ID = 100mA pF VGS = -5.0V, VDS = 25V, f = 1.0MHz ns VDD = 25V, ID = 150mA, RGEN = 25Ω, VGS = 0V to -10V GFS Forward transconductance CISS Input capacitance - - 360 COSS Common source output capacitance - - 40 CRSS Reverse transfer capacitance - - 10 td(ON) Turn-on delay time - - 15 Rise time - - 20 Turn-off delay time - - 20 Fall time - - 30 Diode forward voltage drop - - 1.8 V VGS = -5.0V, ISD = 150mA Reverse recovery time - 800 - ns VGS = -5.0V, ISD = 150mA tr td(OFF) tf VSD trr Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 0V INPUT -10V Pulse Generator 10% t(ON) td(ON) VDD OUTPUT 0V Doc.# DSFP-DN3535 A062713 VDD 90% t(OFF) tr td(OFF) OUTPUT RGEN tf 10% 10% 90% RL INPUT D.U.T. 90% 2 Supertex inc. www.supertex.com DN3535 Typical Performance Curves Output Characteristics 1.0 Saturation Characteristics 1.0 VGS = +2.0V 0V VGS = +2V -0.5V 0.8 0V -0.5V 0.8 -0.8V ID (amperes) ID (amperes) -0.8V 0.6 -1.0V 0.4 0.6 -1V 0.4 -1.5V -1.5V 0.2 0.2 -2V -2V 0 0 50 100 150 200 250 300 0 0 350 2 4 10 2.0 VDS = 10V TO-243AA 0.8 GFS (siemens) 8 Power Dissipation vs. Ambient Temperature Transconductance vs. Drain Current TA = -55 C 1.5 O 0.6 PD (watts) 1.0 6 VDS (volts) VDS (volts) TA = 25OC 0.4 1.0 TA = 125OC 0.5 0.2 0 0.0 0.2 0.4 0.6 0 0 0.8 25 50 ID (amperes) 10 75 100 125 150 TA ( C) O Maximum Rated Safe Operating Area 1.0 Thermal Response Characteristics TO-243AA (pulsed) 1.0 ID (amperes) Thermal Resistance (normalized) TA = 25OC TO-243AA (DC) 0.1 0.01 0.001 1 10 100 0.6 TO-243AA PD = 1.6W TC = 25OC 0.4 0.2 0 0.001 1000 VDS (volts) Doc.# DSFP-DN3535 A062713 0.8 0.01 0.1 1.0 10 tP (seconds) 3 Supertex inc. www.supertex.com DN3535 Typical Performance Curves (cont.) DXFUX"Xctkcvkqp"ykvj"Vgorgtcvwtg 1.2 25 VGS = 0V ID = 1mA VGS = -5V 20 RDS(ON) (ohms) 1.1 B VDSV (normalized) Qp"Tgukuvcpeg"xu0"Ftckp"Ewttgpv 1.0 0.9 15 10 5 0.8 -50 0 50 100 0 0.0 150 0.2 0.4 1300 0.6 0.8 1.0 ID (amperes) Tj (OC) Vtcpuhgt"Ejctcevgtkuvkeu 1.4 VDS = 10V XIU*QHH+"cpf"TFU*QP+"y1Vgorgtcvwtg 2.4 TA = -55OC 25OC 700 500 125OC 2.0 VGS(OFF) @ 10µA 1.0 1.6 0.8 1.2 RDS(ON) @ 0V, 150mA RDS(ON) (normalized) 1.2 VGS(OFF) (normalized) ID (milliamperes) 900 300 0.6 0.8 100 -3 -2 -1 0 1 0.4 -50 2 -25 0 VGS (volts) 350 Ecrcekvcpeg"xu0"Ftckp"Uqwteg"Xqnvcig 100 125 0.4 150 ID = 150mA 2 1 250 VDS = 40V VGS (volts) C (picofarads) 75 Icvg"Ftkxg"F{pcoke"Ejctcevgtkuvkeu 3 VGS = -5V 200 150 CISS 100 0 -1 -2 -3 50 -4 COSS CRSS 10 20 30 -5 0 40 VDS (volts) Doc.# DSFP-DN3535 A062713 50 Tj (OC) 300 0 0 25 500 1000 1500 2000 QG (picocoulombs) 4 Supertex inc. www.supertex.com DN3535 3-Lead TO-243AA (SOT-89) Package Outline (N8) D D1 C E H L 1 2 E1 3 b b1 e A e1 Top View Symbol Dimensions (mm) Side View A b b1 C D D1 E E1 MIN 1.40 0.44 0.36 0.35 4.40 1.62 2.29 2.00† NOM - - - - - - - - MAX 1.60 0.56 0.48 0.44 4.60 1.83 2.60 2.29 e e1 1.50 BSC 3.00 BSC H L 3.94 0.73† - - 4.25 1.20 JEDEC Registration TO-243, Variation AA, Issue C, July 1986. † This dimension differs from the JEDEC drawing Drawings not to scale. Supertex Doc. #: DSPD-3TO243AAN8, Version F111010. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. ©2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-DN3535 A062713 5 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com