Product Overview LMV821: Low Power, Rail-Rail Output, High Output Drive, Large CL stable, Single Op-Amp For complete documentation, see the data sheet Product Description The LMV821, LMV822 and LMV824 are op-amps with low input voltage offset and drift vs. temperature. In spite of low quiescent current requirements, these devices have 5 MHz bandwidth and 1.4 V/µs slew rate. In addition they provide rail-to-rail output swing into 600 Ohm loads. The input common-mode voltage range includes ground, and the maximum input offset voltage is only 3.5 mV. Substantially large capacitive loads can be driven by simply adding a pullup resistor or isolation resistor. The LMV821 (single) is available in a space saving SC70-5, while the dual and quad also come in ultra-small SOIC and TSSOP packages. Features Benefits • Low Offset Voltage: 3.5 mV • Very low Offset Drift: 1.0 V/°C • High Bandwidth: 5 MHz • Improves system accuracy • Maintains system accuracy over temperature • Provides loop gain to better implement feedback transfer equations • Improves signal-to-noise ratio • Reduces need for series isolation resistor • Rail-to-Rail Output Swing into a 600 Ω load • Capable of driving highly capacitive loads Applications End Products • Modem transmitter/receivers • Hard drives • Medical Equipment • Notebook Computers Part Electrical Specifications Product Compliance Status Rail to Rail Channel s VCC Min (V) VCC Max IO Min (V) (mA) IO Typ (mA) ID Typ (mA) GBW Typ (MHz) SR Typ (V/µs) VIO Max (mV) Packag e Type LMV821SQ3T2G Pb-free Active Output 1 2.5 5.5 26 0.3 5 2 3.5 SC-88A5 / SC70-5 / SOT323-5 12 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016