Product Overview MC10EP446: 3.3 V / 5.0 V ECL 8-Bit Differential Parallel to Serial Converter For complete documentation, see the data sheet Product Description The MC10/100EP446 is an integrated 8-bit parallel to serial data converter. The device is designed with unique circuit topology to operate for NRZ data rates up to 3.2 Gb/s. The conversion sequence from parallel data into a serial data stream is from bit D0 to D7. The parallel input pins D0-D7 are configurable to be threshold controlled by CMOS, ECL, or TTL level signals. The serial data rate output can be selected at internal clock data rate or twice the internal data rate using the CKSEL pin. Control pins are provided to reset (SYNC) and disable internal clock circuitry (CKEN). In either CKSEL modes, the internal flip-flops are triggered on the rising edge for CLK and the multiplexers are switched on the falling edge of CLK, therefore, all associated specification limits are referenced to the negative edge of the clock input. Additionally, VBB pin is provided for single-ended input condition. The 100 Series devices contain temperature compensation network. Features • • • • • • • • • • 3.2 Gb/s Typical Data Rate Capability Differential Clock and Serial Inputs VBB Output for Single-ended Input Applications Asynchronous Data Reset (SYNC) PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V Open Input Default State Safety Clamp on Inputs Parallel Interface Can Support PECL, TTL and CMOS Pb-Free Packages are Available For more features, see the data sheet Applications • Parallel to Serial Conversion Part Electrical Specifications Product Compliance Status Type MC10EP446FAG Pb-free Active Halide free MC10EP446FAR2G Pb-free Active Halide free MC10EP446MNG Pb-free Active Halide free MC10EP446MNR4G Pb-free Halide free Active Bits Input Level Output Level VCC fdr Typ Typ (V) (Gb/se c) Parallel 8 /Serial ECL ECL 3.3 Parallel 8 /Serial CML Parallel 8 /Serial ECL Parallel 8 /Serial ECL CML tsu Min (ns) th Min (ns) tJitter Typ (ps) tR & tF Max (ps) Packag e Type 3.4 0.8 -0.45 -0.6 0.2 150 LQFP32 3.4 0.8 -0.45 -0.6 0.2 150 LQFP32 3.4 0.8 -0.45 -0.6 0.2 150 QFN32 3.4 0.8 -0.45 -0.6 0.2 150 QFN32 5 ECL ECL 5 3.3 ECL CML CML tpd Typ (ns) 3.3 5 ECL 5 3.3 For more information please contact your local sales support at www.onsemi.com Created on: 7/4/2016