Product Overview MC10EP445: 3.3 V / 5.0 V ECL 8-Bit Serial to Parallel Converter For complete documentation, see the data sheet Product Description The MC10/100EP445 is an integrated 8-bit differential serial to parallel data converter with frame asynchronous data resynchronization. The device is designed to operate for NRZ data rates of up to 5.0 Gb/s. The conversion sequence was chosen to convert the first serial bit to Q0, the second bit to Q1, etc. Two selectable differential serial inputs, which are selected by SINSEL, provide this device with loop-back testing capability. The MC10/100EP445 has a Sync pin which, when held high for at least two consecutive clock cycles, will swallow one bit of data shifting the start of the conversion data from Dn to Dn+1. Each additional shift requires an additional pulse to be applied to the Sync pin. Extra control pins are provided to reset and disable internal clock circuitry. Additionally, VBB pin is provided for single-ended input condition. The 100 Series contains temperature compensation. Features • • • • • • • • • • 1530 ps Propagation Delay 5.0 Gb/s Data Rate Capability Differential Clock and Serial Inputs VBB Output for Single-Ended Input Applications Asynchronous Data Synchronization (SYNC) Asynchronous Master Reset (RESET) PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE =-3.0 V to -5.5 V Open Input Default State CLK ENABLE Immune to Runt Pulse Generation For more features, see the data sheet Applications • Serial to Parallel Converision Part Electrical Specifications Product Compliance Status Type MC10EP445FAG Pb-free Active Halide free MC10EP445FAR2G Pb-free Halide free Active Bits Input Level Output Level VCC fdr Typ Typ (V) (Gb/se c) Serial/ 8 Parallel CML ECL 5 Serial/ 8 Parallel ECL ECL CML tpd Typ (ns) tsu Min (ns) th Min (ns) tJitter Typ (ps) tR & tF Max (ps) Packag e Type 2.5 1.6 -0.44 0.56 0.2 400 LQFP32 2.5 1.6 -0.44 0.56 0.2 400 LQFP32 3.3 ECL 3.3 5 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016