Product Overview MC10H115: Quad Line Receiver For complete documentation, see the data sheet Product Description The MC10H115 is a quad differential amplifier designed for use in sensing differential signals over long lines. This 10H part is a functional/ pinout duplication of the standard MECL 10K family part, with 100% improvement in counting frequency and no increase in power-supply current. The base bias supply (VBB) is made available at Pin 9 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active current sources provide the MC10H115 with excellent common mode rejection. If any amplifier in a package is not used, one input of that amplifier must be connected to VBB (Pin 9) to prevent upsetting the current source bias network. Features • • • • • • Propagation Delay, 1.0 ns Typical Power Dissipation 110 mW Typ/Pkg (No Load) Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range) Voltage Compensated MECL 10K-Compatible Pb-Free Packages are Available Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) MC10H115FNG Pb-free Active Signal Driver 4 1:1 ECL ECL Active Signal Driver 4 1:1 ECL ECL Halide free MC10H115PG Pb-free Halide free tJitterR MS Typ (ps) tpd Typ (ns) tR & tF Max (ps) -5.2 0.85 1600 PLLC20 -5.2 0.85 1600 PDIP16 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016 tskew(oo) Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type