Product Overview MC100EP16T: Differential Driver / Receiver with Internal Termination For complete documentation, see the data sheet Product Description The EP16T is a world-class differential receiver/driver. The device is functionally equivalent to the EP16 with internal termination resistors. A 50 resistor is connected from the D input to the VT pin and from the Dbar input to the VTbar pin. Tie the VT and VTbar pins to VTT supply (VCC - 2 V) for parallel termination or connect VT and VTbar pins for 100 input series termination. Special considerations are required for differential inputs under No Signal conditions to prevent instability. The 100 Series contains temperature compensation. Features • • • • • 220 ps Typical Propagation Delay Maximum Frequency > 3 GHz Typical PECL Mode Operating Range: VCC= 3.0 V to 5.5 V with VEE= 0 V NECL Mode Operating Range: VCC= 0 V with VEE= -3.0 V to -5.5 V Internal 50 Ω Termination Resistors Applications • Low-Clock Skew Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC100EP16TDR2G Pb-free Active Signal Driver 1 1:1 ECL 0.2 20 0.24 170 3000 SOIC8 Active Signal Driver 1 1:1 0.2 20 0.24 170 3000 TSSO P-8 Active Signal Driver 1 1:1 0.2 20 0.24 170 3000 TSSO P-8 Active Signal Driver 1 1:1 0.2 20 0.24 170 3000 DFN-8 Halide free MC100EP16TDTG Pb-free Halide free MC100EP16TDTR2G Pb-free Halide free MC100EP16TMNR4G Pb-free Halide free ECL CML CML 3.3 ECL ECL CML ECL 5 3.3 ECL ECL CML 5 5 3.3 ECL 5 3.3 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016