Product Overview NCP1051: Monolithic High Voltage Gated Oscillator Power Switching Regulator For complete documentation, see the data sheet Product Description The NCP1050 through NCP1055 are monolithic high voltage regulators that enable end product equipment to be compliant with low standby power requirements. This device series combines the required converter functions allowing a simple and economical power system solution for office automation, consumer, and industrial products. These devices are designed to operate directly from a rectified AC line source. In flyback converter applications they are capable of providing an output power that ranges from 6.0 W to 40 W with a fixed AC input of 100 V, 115 V, or 230 V, and 3.0 W to 20 W with a variable AC input that ranges from 85 V to 265 V. This device series features an active startup regulator circuit that eliminates the need for an auxiliary bias winding on the converter transformer, fault logic with a programmable timer for converter overload protection, unique gated oscillator configuration for extremely fast loop response with double pulse suppression, power switch current limiting, input undervoltage lockout with hysteresis, thermal shutdown, and auto restart fault detection. These devices are available in an economical 8-pin dual-in-line package. Features • • • • • • • • • • Startup Circuit Eliminates the Need for Transformer Auxiliary Bias Winding Optional Auxiliary Bias Winding Override for Lowest Standby Power Applications Converter Output Overload and Open Loop Protection Auto Restart Fault Protection IC Thermal Fault Protection Unique, Dual Edge, Gated Oscillator Configuration for Extremely Fast Loop Response Oscillator Frequency Dithering with Controlled Slew Rate Driver for Reduced EMI Low Power Consumption Allowing European Blue Angel Compliance On–Chip 700 V Power Switch Circuit and Active Startup Circuit Rectified AC Line Source Operation from 85 V to 265 V For more features, see the data sheet Applications • • • • AC–DC Converters Wall Adapters Portable Electronic Chargers Low Power Standby and Keep–Alive Supplies Part Electrical Specifications Product Compliance Status Contr fsw fJitter ol Typ Typ Mode (kHz) (%) Stan RDS(O V(BR) DSS d-by N) Max Mode Typ (Ω) (V) IPeak (mA) HV DSS Start- (mA) up Min (V) UVL O Short Circu it Prote ction Over Brow Powe n-out r Com pens ation Latch Pack age Type NCP1051ST100T3G Pb-free Active Curre 100 nt Mode Yes Yes 30 700 200 Yes 6.3 Yes Yes No No Yes SOT2234/ TO2614 Active Curre 136 nt Mode Yes Yes 30 700 200 Yes 6.3 Yes Yes No No Yes SOT2234/ TO2614 Active Curre 44 nt Mode Yes Yes 30 700 200 Yes 6.3 Yes Yes No No Yes SOT2234/ TO2614 Halide free NCP1051ST136T3G Pb-free Halide free NCP1051ST44T3G Pb-free Halide free Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016