ESD protection diodes for automotive applications; PESD1FLEX, PESD1LIN, PESD1CAN, PESD2CAN

PESD1FLEX
PESD1LIN
PESD1CAN
PESD2CAN
ESD protection diodes
for automotive applications
Protecting an Electronic Control Unit (ECU) against ElectroStatic Discharge (ESD) and other transient
pulses is one of the most important ways to reduce failures in automotive applications. These pulses
can enter the ECU via the battery line as well as the data bus lines.
NXP Semiconductors offers a series of ESD protection diodes designed to protect FlexRay bus
transceivers, Local Interconnect Network (LIN) and Controller Area Network (CAN) as well as other
ESD sensitive automotive electronic components.
All these devices deliver MIL-STD-883 class 3-compliant human body protection and meet the
IEC 61000-4-2 (air and contact discharge) and IEC 61000-4-5 standards.
PESD1FLEX
FlexRay
bus
common
mode choke
(optional)
FlexRay bus protection
The PESD1FLEX protects two automotive FlexRay data lines
from the damage caused by ESD and other transients.
It supports the FlexRay data rate of 10 Mbit/s and provides
a surge capability of up to 200 W per line for an 8/20 μs
waveform.
BM
RT/2
FlexRay
Transceiver
RT/2
BP
PESD1FLEX
CG
1
2
Key features
}
bidirectional protection for two FlexRay bus lines in
one small SOT23 package
}very low capacitance: Cd = 11 pF at VR = 0 V, f = 5 MHz
}ultra low leakage current: IRM < 1 nA
}ESD protection up to 23 kV
3
006aab053
1
3
PESD1FLEX
FlexRay bus
ESD protection
2
2.9 × 1.3 × 1.0 mm
mse213
PESD1LIN
Local Interconnect Network (LIN) bus protection
The PESD1LIN protects one automotive LIN bus line
from the damage caused by ESD and other transients. Its
asymmetrical internal diode configuration ensures optimized
electromagnetic immunity for the protected LIN ECU.
Key features
}bidirectional protection for one LIN bus line in a very
small SOD323 (SC-76) SMD plastic package
}max. peak pulse power: PPP = 160 W at tp = 8/20 µs
}low clamping voltage: V(CL)R = 40 V at IPP = 1 A
}ultra low leakage current: IRM < 1 nA
}ESD protection up to 23 kV
LIN Node
Connector
Power Application (e.g. electro motor, inductive loads)
Application (e.g. voltage regulator and microcontroller)
CBAT
BAT
LIN
24 V
CMASTER/SLAVE
GND
LIN
Transceiver
15 V
PESD1LIN
bra328
15 V
24 V
1
2
PESD1LIN
bra526
LIN bus
ESD protection
1.7 × 1.25 × 0.95 mm
PESD1CAN and PESD2CAN
Controller Area Network (CAN) bus protection
The PESD1CAN and PESD2CAN protect two automotive
CAN bus lines from the damage caused by ESD and other
transients. They can be used with both high-speed and
fault-tolerant CAN buses.
Key features PESD1CAN
}bidirectional protection for two CAN bus lines in
one small SOT23 package
}very low capacitance: Cd = 11 pF
}ESD protection up to 23 kV
SPLIT
CANH
CAN Bus
Transceiver
R T/2
CAN
bus
R T/2
CANL
common
mode choke
(optional)
PESD1CAN
CAN bus
ESD protection
2
1
PESD1CAN
CG
PESD2CAN
3
bra519
1
Key features PESD2CAN
}bidirectional protection for two CAN bus lines in
one small SOT23 package
}max. peak pulse power: PPP = 230 W at tp = 8/20 µs
}low clamping voltage: V(CL)R = 34 V at Ipp = 1 A
}ESD protection up to 30 kV
PESD2CAN
CAN bus
ESD protection
3
2
mse213
2.9 × 1.3 × 1.0 mm
Automotive selection guide
Configuration
Number of lines
IRM max @ VRWM
uni-
(µA)
bi-
(V)
C typ
PPP max
ESD rating acc.
(pF)
8/20 µs pulse
to IEC 61000-4-2
(W)
(kV)
11*
200
23
13
160
23
directional
SOT23
SOD323 (SC-76)
1
2
3
0.05
24
PESD1FLEX
2
mse213
15 V
24 V
1
1
2
bra526
1
2
mse213
1
2
mse211
2
1
3
2
bra004
1
3
2
mse212
15
0.05
24
0.05
24
11
200
23
PESD1CAN
0.01
24
25
230
30
PESD2CAN
1
5
75
500
30
PESD1LIN
2
3
1
0.05
PESD5V0L1BA
1
0.05
12
19
200
30
PESD12VL1BA
1
0.05
24
11
200
23
PESD24VL1BA
1
1
5
152
260
30
PESD5V0S2UAT
2
1
0.05
12
38
180
30
PESD12VS2UAT
2
1
0.05
24
23
160
23
PESD24VS2UAT
2
1
1
5.2
152
260
30
PESD5V2S2UT
2
1
1
12
38
180
30
PESD12VS2UT
2
1
1
24
23
160
23
PESD24VS2UT
* f = 5 MHz; VR = 0 V Bold types - samples included.
www.nxp.com
©2007 NXP B.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
Date of release: August 2007
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and
Document order number: 9397 750 16110
reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Printed in the Netherlands
Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.