Product Overview NCS20034: 7 MHz, High Slew Rate, Rail-to-Rail Output, Quad Op-Amp For complete documentation, see the data sheet Product Description The NCS2003 family of op amps features high slew rate, low voltage operation with rail-to-rail output drive capability. The 1.8 V operation allows high performance operation in low voltage, low power applications. The fast slew rate and wide unity-gain bandwidth (5 MHz at 1.8 V) make these op amps suited for high speed applications. The low input offset voltage (4 mV max) allows the op amp to be used for current shunt monitoring. Additional features include no output phase reversal with overdriven inputs and ultra low input bias current of 1 pA. The NCS2003 family is the ideal solution for a wide range of applications and products. The single channel NCS2003, dual channel NCS20032, and quad channel NCS20034 are available in a variety of compact and space-saving packages. The NCV prefix denotes that the device is AEC-Q100 Qualified and PPAP Capable. Features • • • • • • • Benefits Unity Gain Bandwidth: 7 MHz at VS = 5 V Fast Slew Rate: 8 V/us rising, 12.5 V/us falling at VS = 5 V Rail-to-Rail Output No Output Phase Reversal for Over-Driven Input Signals Low Offset Voltage: 500 mV typical Low Input Bias Current: 1 pA typical NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable Applications • • • • • • • Operates at higher speeds Faster response Wide dynamic range Output stays stable in over-driven conditions Better output accuracy High input impedance Meets automotive requirements End Products • Low Side Current Sensing • Automotive - Electronic Power Steering & Fuel Pumps (Motor Current Sense) • Industrial Motor Drives (Motor Current Sense) • White Goods & Air Conditioners (Motor Current Sense) • Hard Drives • Signal Conditioning • Active Filter • Sensor Buffer Part Electrical Specifications Product Compliance Status Rail to Rail Channel s VCC Min (V) VCC Max IO Min (V) (mA) IO Typ (mA) ID Typ (mA) GBW Typ (MHz) SR Typ (V/µs) VIO Max (mV) Packag e Type NCS20034DR2G AEC Qualified Active Output 4 1.7 5.5 5 76 0.23 7 8 4 SOIC14 Active Output 4 1.7 5.5 5 76 0.23 7 8 4 SOIC14 Pb-free Halide free NCV20034DR2G AEC Qualified PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016