Product Overview NCS7101: 10V Supply, Low Bias Current, Rail-Rail I/O, Single Op-Amp For complete documentation, see the data sheet Product Description The NCS7101 op-amp provides rail-to-rail operation on both the input and output. The output can swing within 50 mV of each rail. This rail-to-rail operation enables the user to make full use of the entire supply voltage range available. It is designed to work at very low supply voltages (1.8 V and ground), yet can operate with a supply of up to 10 V and ground. The NCS7101 is available in the space saving SOT23-5 package with two industry standard pinouts. Features • • • • • • • • • Low Voltage, Single Supply Operation (1.8 V and Ground to 10 V and Ground) 1.0 pA Input Bias Current Unity Gain Bandwidth of 1.0 MHz at 5.0 V, 0.9 MHz at 1.8 V Output Voltage Swings Within 50 mV of Both Rails @ 1.8 V No Phase Reversal on the Output for Over-Driven Input Signals Input Offset Trimmed to 1.0 mV Low Supply Current (ID = 1.0 mA) Works Down to Two Discharged NiCd Battery Cells ESD Protected Inputs Up to 2.0 kV Applications • • • • End Products Dual NiCd/NiMH Cell Powered Systems Low Voltage Active Filters Power Supply Monitor and Control Interface to DSP • Portable Communication Devices Part Electrical Specifications Product Compliance Status Rail to Rail NCS7101SN1T1G Pb-free VCC Min (V) VCC Max IO Min (V) (mA) IO Typ (mA) ID Typ (mA) GBW Typ (MHz) SR Typ (V/µs) VIO Max (mV) Packag e Type Active Input/Ou 1 tput 1.8 10 50 72 1.13 1 1.2 7 TSOP-5 / SOT23-5 Active Input/Ou 1 tput 1.8 10 50 72 1.13 1 1.2 7 TSOP-5 / SOT23-5 Active Input/Ou 1 tput 1.8 10 50 72 1.13 1 1.2 7 TSOP-5 / SOT23-5 Active Input/Ou 1 tput 1.8 10 50 72 1.13 1 1.2 7 TSOP-5 / SOT23-5 Halide free NCS7101SN2T1G Pb-free Halide free NCV7101SN1T1G AEC Qualified Channel s PPAP Capable Pb-free Halide free NCV7101SN2T1G AEC Qualified PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016