Product Overview

Product Overview
TLV271: 16V Low Noise & Bias Current, 3.5MHz, Low Power, Rail-to-Rail
Output, Single Op-Amp
For complete documentation, see the data sheet
Product Description
The TLV271 operational amplifier provides rail to rail output operation. The output can swing within 320 mV to the positive rail and
50 mV to the negative rail. This rail to rail operation enables the user to make optimal use of the entire supply voltage range while
taking advantage of 3 MHz bandwidth. The TLV271 can operate on supply voltage as low as 2.7 V over the temperature range of
minus 40 to plus 105 degrees C. The high bandwidth provides a slew rate of 2.4 V per us while only consuming 550uA of quiescent
current. Likewise the TLV271 can run on a supply voltage as high as 16 V making it ideal for a broad range of battery operated
applications. Since this is a CMOS device it has high input impedance and low bias currents making it ideal for interfacing to a wide
variety of signal sensors. In addition it comes in a small TSOP5 package with two pinout styles allowing for use in high density
PCBs.
Features
•
•
•
•
•
•
Benefits
Rail To Rail Output
Wide Bandwidth: 3 MHz
Wide Power Supply Range: 2.7 V to 16 V
Low Supply Current: 550 µA
Low Input Bias Current: 1 pA
Wide Temperature Range: -40°C to +105°C
•
•
•
•
•
•
Applications
Optimize SNR
Enhanced loop gain
Versatile
Reduced power consumption
Tolerates high-impedance sensors
Very robust
End Products
• Wideband Amplification
• Notebook and Desktop Computers
Part Electrical Specifications
Product
Compliance
Status
Rail to
Rail
Channel
s
VCC Min
(V)
VCC Max IO Min
(V)
(mA)
IO Typ
(mA)
ID Typ
(mA)
GBW
Typ
(MHz)
SR Typ
(V/µs)
VIO Max
(mV)
Packag
e Type
TLV271SN1T1G
Pb-free
Active
Output
1
2.7
16
5
13
0.38
3.5
2.6
5
TSOP-5
/ SOT23-5
Active
Output
1
2.7
16
5
13
0.38
3.5
2.6
5
TSOP-5
/ SOT23-5
Halide free
TLV271SN2T1G
Pb-free
Halide free
Application Diagram
For more information please contact your local sales support at www.onsemi.com
Created on: 6/30/2016