Product Brief Features 500V CoolMOS™ CE Power MOSFET The CoolMOS™ CE is a new technology platform of Infineon’s market leading high voltage power MOSFETs designed according to the revolutionary superjunction (SJ) principle. 500V CE portfolio provides all benefits of a fast switching SJ MOSFET while not sacrificing ease of use. As the complete CE series, devices achieve extremely low conduction and switching losses and can make switching applications more efficient, more compact, lighter and cooler. Reduced energy stored in output capacitance (Eoss) High body diode ruggedness Reduced reverse recovery charge (Qrr) Reduced gate charge (Qg) Benefits Easy control of switching behavior Improved light load efficiency compared to previous CoolMOS™ generations Cost attractive alternative compared to standard MOSFETs Outstanding reliability with proven CoolMOS™ quality combined with high body diode ruggedness Efficiency comparison 500V CoolMOS™ CE vs competitor standard MOSFET CCM PFC stage, 90VAC up to 400W Applications IPP50R280CE vs. Standard MOS IPP50R280CE vs. Standard MOS efficiency @ VIN=90VAC; plug&play scenario; Rg,ext=5Ω ; f=100kHz; VOUT=400VDC delta efficiency @ VIN=90VAC; plug&play scenario; Rg,ext=5Ω ; f=100kHz; VOUT=400VDC 0,6 98 0,4 IPP50R280CE Standard MOS 96 95 94 93 0,0 -0,2 50 100 150 200 250 -0,4 92 -0,6 91 -0,8 90 IPP50R280CE Standard MOS 0,2 delta efficiency [%] absolute efficiency [%] 97 40% Qg reduction -1,0 POUT [W] www.infineon.com/ce POUT [W] 300 350 400 Consumer Lighting PC Silverbox Product Brief 500V CoolMOS™ CE Power MOSFET IPP50R500CE vs. Standard MOS hard commutation on conducting body diode; half bridge configuration High Side MOS = Low Side MOS, same RG,sum = 5Ω Simplified test circuit VDS, max , maximum VDS due to high dlrr/dt [V] 500 SW 490 RG,ext 480 IF IPP50R500CE Standard MOS 470 DUT VDS 145µH RG,ext 460 ISD 450 simplified waveform when switching ON of High Side MOSFET for 2nd time (double pulse) ISD 440 VDS max dIF / dt IF 12V lower drain source overshoot 430 400V 0A 420 t dIrr / dt Imm 410 0V VDS t 400 0 1 2 3 4 5 6 IF , forward current through body diode [A] 7 From IF=1 to IF=4A better behaviour observed of 500V CE IF > 4A same behaviour Body diode conduction < 2µs before turn-off Product Portfolio CoolMOS™ CE TO-220 FullPAK TO-252 DPAK TO-220 TO-247 IPAK RDS(on) 3000 mΩ 2000 mΩ 1400 mΩ 950 mΩ 800 mΩ 650 mΩ 500 mΩ 380 mΩ 280 mΩ 190 mΩ IPA50R950CE IPA50R800CE* IPA50R650CE* IPA50R500CE IPA50R380CE* IPA50R280CE IPA50R190CE* Applications Consumer IPD50R3k0CE* IPD50R2k0CE** IPD50R1k4CE* IPD50R950CE IPD50R800CE* IPD50R650CE* IPD50R500CE IPD50R380CE* IPD50R280CE Consumer, Lighting IPU50R3k0CE* IPU50R2k0CE** IPU50R1k4CE* IPU50R950CE* IPP50R500CE IPP50R380CE* IPP50R280CE IPP50R190CE* IPW50R280CE IPW50R190CE* PC Silverbox PC Silverbox SSL: Solid State Lighting * Samples available by Q3 / 2012 ** Samples available by Q4 / 2012 Published by Infineon Technologies Austria AG 9500 Villach, Austria © 2012 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B152-H9688-X-X-7600-DB2012-0003 Date: 10 / 2012 Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.