BCR183... PNP Silicon Digital Transistor • Switching circuit, inverter, interface circuit, driver circuit • Built in bias resistor (R1 = 10 kΩ , R2 = 10 kΩ) • BCR183S / U: Two internally isolated transistors with good matching in one multichip package • BCR183S / U: For orientation in reel see package information below • Pb-free (RoHS compliant) package 1) • Qualified according AEC Q101 BCR183/F BCR183W BCR183S/U C C1 B2 3 6 5 E2 4 R2 R1 R1 TR2 TR1 R2 R1 R2 1 B 2 1 2 3 E E1 B1 C2 EHA07183 EHA07173 Type Marking BCR183 WMs 1=B 2=E 3=C - - - SOT23 BCR183F WMs 1=B 2=E 3=C - - - TSFP-3 BCR183S WMs 1=E1 2=B1 3=C2 4=E2 5=B2 6=C1 SOT363 BCR183U WMs 1=E1 2=B1 3=C2 4=E2 5=B2 6=C1 SC74 BCR183W WMs 1=B 1Pb-containing Pin Configuration 2=E 3=C - - Package - SOT323 package may be available upon special request 1 2007-07-31 BCR183... Maximum Ratings Parameter Symbol Collector-emitter voltage VCEO 50 Collector-base voltage VCBO 50 Input forward voltage Vi(fwd) 40 Input reverse voltage Vi(rev) 10 Collector current IC 100 Total power dissipation- Ptot Value 200 BCR183F, TS ≤ 128°C 250 BCR183S, T S ≤ 115°C 250 BCR183U, TS ≤ 118°C 250 BCR183W, TS ≤ 124°C 250 Tj Storage temperature Tstg Thermal Resistance Parameter Junction - soldering point 1) Symbol RthJS 150 mA °C -65 ... 150 Value BCR183 ≤ 240 BCR183F ≤ 90 BCR183S ≤ 140 BCR183U ≤ 133 BCR183W ≤ 105 1For V mW BCR183, TS ≤ 102°C Junction temperature Unit Unit K/W calculation of RthJA please refer to Application Note Thermal Resistance 2 2007-07-31 BCR183... Electrical Characteristics at TA = 25°C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. DC Characteristics Collector-emitter breakdown voltage V(BR)CEO 50 V IC = 100 µA, IB = 0 Collector-base breakdown voltage V(BR)CBO 50 - - I CBO - - 100 nA I EBO - - 0.75 mA h FE 30 - - - - - 0.3 V Vi(off) 0.8 - 1.8 Vi(on) 1 - 2.5 Input resistor R1 7 10 13 kΩ Resistor ratio R1/R 2 0.9 1 1.1 - fT - 200 - MHz Ccb - 3 - pF IC = 10 µA, IE = 0 Collector-base cutoff current VCB = 40 V, IE = 0 Emitter-base cutoff current VEB = 10 V, IC = 0 DC current gain1) IC = 5 mA, VCE = 5 V Collector-emitter saturation voltage1) VCEsat IC = 10 mA, IB = 0.5 mA Input off voltage IC = 100 µA, VCE = 5 V Input on voltage IC = 2 mA, VCE = 0.3 V AC Characteristics Transition frequency IC = 10 mA, VCE = 5 V, f = 100 MHz Collector-base capacitance VCB = 10 V, f = 1 MHz 1Pulse test: t < 300µs; D < 2% 3 2007-07-31 BCR183... DC current gain hFE = ƒ(IC) VCE = 5 V (common emitter configuration) Collector-emitter saturation voltage VCEsat= ƒ(IC), IC/IB = 20 10 3 1 V 0.8 V CEsat h FE -40 °C -25 °C 25 °C 85 °C 125 °C 10 2 0.7 0.6 -40 °C -25 °C 25 °C 85 °C 125 °C 0.5 0.4 10 1 0.3 0.2 0.1 10 0 -4 10 10 -3 10 -2 A 10 0 -3 10 -1 10 -2 A 10 IC IC Input on Voltage Vi(on) = ƒ(IC ) VCE = 0.3V (common emitter configuration) Input off voltage V i(off) = ƒ(IC) VCE = 5V (common emitter configuration) 10 1 10 2 V -40 °C -25 °C 25 °C 85 °C 125 °C -40 °C -25 °C 25 °C 85 °C 125 °C Vi(off) Vi(on) V 10 1 -1 10 0 10 0 10 -1 -5 10 10 -4 10 -3 10 -2 A 10 10 -1 -5 10 -1 IC 10 -4 10 -3 10 -2 A 10 -1 IC 4 2007-07-31 BCR183... Total power dissipation Ptot = ƒ(TS) BCR183 Total power dissipation Ptot = ƒ(TS) BCR183F 300 300 mW 250 250 225 225 200 200 P tot P tot mW 175 175 150 150 125 125 100 100 75 75 50 50 25 25 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 15 30 45 60 75 TS 150 TS Total power dissipation Ptot = ƒ(TS) BCR183S Total power dissipation Ptot = ƒ(TS) BCR183U 300 300 mW mW 250 250 225 225 200 200 Ptot Ptot 90 105 120 °C 175 175 150 150 125 125 100 100 75 75 50 50 25 25 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 TS 15 30 45 60 75 90 105 120 °C 150 TS 5 2007-07-31 BCR183... Total power dissipation Ptot = ƒ(TS) BCR183W 300 mW 250 P tot 225 200 175 150 125 100 75 50 25 0 0 15 30 45 60 90 105 120 °C 75 150 TS Permissible Pulse Load RthJS = ƒ(tp ) BCR183 Permissible Pulse Load Ptotmax/P totDC = ƒ(tp) BCR183 10 3 10 3 Ptotmax / PtotDC K/W RthJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 6 2007-07-31 BCR183... Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BCR183F Ptotmax/P totDC = ƒ(tp) BCR183F 10 2 10 3 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 1 10 0 10 -1 -6 10 P totmax/P totDC RthJS K/W 10 -5 10 -4 10 -3 10 10 2 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BCR183S Ptotmax/P totDC = ƒ(tp) BCR183S 10 3 10 3 Ptotmax / PtotDC K/W RthJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 7 2007-07-31 BCR183... Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BCR183U Ptotmax/P totDC = ƒ(tp) BCR185U 10 3 10 3 P totmax / P totDC K/W RthJS 10 2 10 1 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Puls Load RthJS = ƒ (tp) Permissible Pulse Load BCR183W Ptotmax/P totDC = ƒ(tp) BCR183W 10 3 10 3 Ptotmax / PtotDC K/W RthJS 10 2 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 0 10 -1 -6 10 10 -5 10 -4 10 -3 10 10 1 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 8 2007-07-31 Package SC74 BCR183... Package Outline B 1.1 MAX. 1 2 3 0.35 +0.1 -0.05 Pin 1 marking 0.2 B 6x M A 0.1 MAX. 0.95 0.2 1.9 1.6 ±0.1 4 10˚ MAX. 5 2.5 ±0.1 6 0.25 ±0.1 0.15 +0.1 -0.06 (0.35) 10˚ MAX. 2.9 ±0.2 (2.25) M A Foot Print 2.9 1.9 0.5 0.95 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCW66H Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 0.2 2.7 8 4 Pin 1 marking 3.15 1.15 9 2007-07-31 Package SOT23 BCR183... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 ±0.1 1 2.4 ±0.15 3 0.1 MAX. 10˚ MAX. B 1 ±0.1 10˚ MAX. 2.9 ±0.1 0.15 MIN. Package Outline A 5 0...8˚ 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 1.3 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s 2005, June Date code (YM) Pin 1 BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.9 Pin 1 1.15 3.15 10 2007-07-31 Package SOT323 BCR183... Package Outline 0.9 ±0.1 2 ±0.2 0.3 +0.1 -0.05 0.1 MAX. 3x 0.1 M 0.1 A 1 2 1.25 ±0.1 0.1 MIN. 2.1 ±0.1 3 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 0.8 1.6 0.6 0.65 0.65 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BCR108W Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.1 11 2007-07-31 Package SOT363 BCR183... Package Outline 2 ±0.2 0.9 ±0.1 +0.1 6x 0.2 -0.05 0.1 0.1 MAX. M 0.1 Pin 1 marking 1 2 3 A 1.25 ±0.1 4 0.1 MIN. 5 2.1 ±0.1 6 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 1.6 0.9 0.7 0.3 0.65 0.65 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 2005, June Date code (Year/Month) Pin 1 marking Laser marking BCR108S Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel For symmetric types no defined Pin 1 orientation in reel. 0.2 2.3 8 4 Pin 1 marking 1.1 2.15 12 2007-07-31 Package TSFP-3 BCR183... Package Outline 0.2 ±0.05 0.55 ±0.04 1 1.2 ±0.05 0.2 ±0.05 3 2 0.2 ±0.05 10˚ MAX. 0.8 ±0.05 1.2 ±0.05 0.15 ±0.05 0.4 ±0.05 0.4 ±0.05 Foot Print 1.05 0.45 0.4 0.4 0.4 Marking Layout (Example) Manufacturer BCR847BF Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 1.2 1.5 8 0.3 Pin 1 0.7 1.35 13 2007-07-31 BCR183... Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 14 2007-07-31