Product Overview NCV8675: Linear Voltage Regulator, LDO, Very Low Iq, 350 mA, with Reset and Reset Delay For complete documentation, see the data sheet Product Description The NCV8675 is a precision 5.0 V and 3.3 V fixed output, low dropout integrated voltage regulator with an output current capability of 350 mA. Careful management of light load current consumption, combined with a low leakage process, achieve a typical quiescent ground current of 34 µA. It is internally protected against input transients, input supply reversal, output overcurrent faults, and excess die temperature. No external components are required to enable these features. NCV8675 is pin for pin compatible with NCV4275 and it could replace this part when very low quiescent current is required. The 2 output voltage is accurate within ±2.0% for D PAK-5 package and ±2.5% for DPAK-5 package, and maximum dropout voltage is 600 mV at full rated load current. Features Benefits • 5.0 V and 3.3 V Fixed Output Voltage with 2% or 2.5% Output Voltage Accuracy • Maximum 34uA Quiescent Current with 100uA load • Able to supply newest mircoprocessors • Meet 100uA max module car manufacturer ignition off quiescent current requirement • No external components required to enable protections required within any automotive applications. • Protections: -42 V Reverse Voltage Protection Short Circuit • AEC-Q100 Qualified • Very Low Dropout Voltage • Meet automtive qualification requirements Applications End Products • Engine Control Module • Body and Chassis • Powertrain • Automotive Part Electrical Specifications Product Compliance Status Output Polarity VO (V) IO Typ (A) VI Max (V) VDO Typ (V) Iq Typ (mA) PSRR (dB) Noise (µVrms) Package Type NCV8675DS33R4G AEC Qualified Active Single Positive 3.3 0.35 45 0.31 0.034 70 D PAK-5 Active Single Positive 5 0.35 45 0.31 0.034 70 D PAK-5 Active Single Positive 3.3 0.35 45 0.31 0.034 70 DPAK-5 Active Single Positive 5 0.35 45 0.31 0.034 70 DPAK-5 2 PPAP Capable Pb-free Halide free 2 NCV8675DS50R4G AEC Qualified PPAP Capable Pb-free Halide free NCV8675DT33RKG AEC Qualified PPAP Capable Pb-free Halide free NCV8675DT50RKG AEC Qualified PPAP Capable Pb-free Halide free Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016